wsm RC60-27BR Workshop Manual page 44

RCK54/60-24B-EC · RCK60-27B-EC · RC60-24/27BR, WSM
Adjusting Cutting Height (Rear Discharge Mower)
1. The cutting height can be adjusted from 25 mm to 89 mm (from
1.0 in. to 3.5 in.).
2. To adjust the cutting height, lift the mower slightly and close the
3-point lowering speed knob.
3. To adjust the cutting height, set the front gauge wheels, anti-
scalp skids and rear gauge wheels as shown in the table below.
The recommended cutting height is approx. 50 mm (2.0 in.).
[RC60-24BR, RC60-27BR]
Cutting height Front gauge wheel
25 mm (1.0 in.)
38 mm (1.5 in.)
50 mm (2.0 in.)
64 mm (2.5 in.)
76 mm (3.0 in.)
89 mm (3.5 in.)
IMPORTANT
• After adjusting the cutting height, open the 3-point lowering
speed knob and adjust the lowering speed of the mower.
Adjusting Front Link and Connecting Rod
1. See page G-20, 21.
S-6
ROTARY MOWER
Rear gauge
wheel
C-X 1
C-Y 2
B-X 3
B-Y 4
A-X 5
A-Y 6
Anti-scalp
skid
I
II
W1012112
W1012485
KiSC issued 11, 2006 A