Maintenance Check List - wsm RC60-27BR Workshop Manual

RCK54/60-24B-EC · RCK60-27B-EC · RC60-24/27BR, WSM

5. MAINTENANCE CHECK LIST

To keep the mower working in good condition as well as to avoid any accident and trouble, carry out periodic
inspection and maintenance. Check the following points before use.
Service interval
Daily (Each use)
Initial 50 hours
Every 50 hours
Every 150 hours
Every 2 years
(After purchase)
• Anything unusual in previous day's operation
• Make sure mower blade screws are tighten
• Check mower blades for wear or damage
• Check gear box oil level
• Check oil leaks
• Check all hardware
• Make sure all pins are in place
• Clean mower deck
• Apply grease to universal joint
• Apply grease to spindle shafts (Bevel gear shaft and blade shafts)
• Apply grease to belt tension pulley
• Apply grease to belt tension pivot
• Apply grease to front center anti-scalp roller
• Apply grease to lift arms
• Change gear box oil
• Apply grease to front and rear gauge wheels
• Apply grease to middle lift arm
• Apply grease to lift cylinder joint pin
• Check mower belt
• Change gear box oil
• Replace gear box oil seal
Check points
G-5
G GENERAL
Reference
Page
–
G-6
S-4
G-7
–
–
–
–
G-8
G-8
G-8
G-8
G-10
G-8, 10
G-9
G-10
G-10
G-10
S-4
G-9
G-11
W1013580
KiSC issued 11, 2006 A