Setting Up Mower - wsm RC60-27BR Workshop Manual

RCK54/60-24B-EC · RCK60-27B-EC · RC60-24/27BR, WSM

7. SETTING UP MOWER

Assembling Mower
CAUTION
• Do not operate the rear gauge wheel adjusting lever (4)
without support by block (3).
1. Take out all mower components from the case, and assemble the
mower.
2. Support the mower deck with a block (3) as shown in the figure.
3. Turn the anti-scalp wheel (1) sideway position, and set the rear
gauge wheel (2) on the lowest cutting height.
4. Remove the block.
(1) Anti-scalp Wheel
(2) Rear Gauge Wheel
Rear Wheel (RCK54-24B-EC, RCK60-24B-EC, RC60-24BR)
1. Park the tractor on level ground, and set the both rear wheels (1)
of the tractor at the outer position (A).
(1) Rear Wheel
Front Hanger Bracket
1. Attach the front hanger bracket (1) to the frame with M14 bolts.
(1) Front Hanger Bracket
G-12
G GENERAL
(3) Block
(4) Rear Gauge Wheel Adjusting Lever
W1029213
A : Outer Position
W1015453
W1029353
KiSC issued 11, 2006 A