wsm RC60-27BR Workshop Manual page 27

RCK54/60-24B-EC · RCK60-27B-EC · RC60-24/27BR, WSM
Lift Arm, Lift Link and Connecting Rod
1. Install the lift arms (2), lift links (3) and connecting rods (1) to the
rear hanger bracket with plain washers and cotter pins.
NOTE
• The lift cylinder type does not use the connecting rod (1).
• Completely bend the cotter pin (5) to prevent contact with
link stopper as shown in the figure.
• When assembling the connecting rod, insert the clevis pin
(6), (7) care with the direction as shown in figure, and be sure
to properly bend the cotter pin.
(1) Connecting Rod
(2) Lift Arm
(3) Lift Link
(4) Link Stopper
(5) Cotter Pin
(6) Clevis Pin
(7) Clevis Pin
G-16
G GENERAL
(A) RCK54-24B-EC, RCK60-24B-EC,
RC60-24BR, RC60-27BR with 3-
Point Hitch Lift Type
(B) RCK60-27B-EC with 3-Point Hitch
Lift Type
(C) RCK54-24B-EC, RCK60-24B-EC,
RCK60-27B-EC
(D) RC60-24BR, RC60-27BR
W1016829
KiSC issued 11, 2006 A