wsm RC60-27BR Workshop Manual page 28

RCK54/60-24B-EC · RCK60-27B-EC · RC60-24/27BR, WSM
Rear Link
(When mounting the mower only)
1. Install the rear links (3) to the mid hanger brackets (1) with plain
washers and cotter pins.
2. Attach the lift links (2) to the rear links (3) with clevis pins, plain
washers and cotter pins.
(When mounting the mower with front loader)
1. Install the rear links (3) to the front loader frame (5) with pins (4),
plain washers and cotter pins.
2. Attach the lift links (2) to the rear links (3) with clevis pins, plain
washers and cotter pins.
(1) Mid Hanger Bracket
(2) Lift Link
(3) Rear Link
Lift Bracket (3-Point Hitch Lift Type Only)
1. Remove the spacer and lower links from the shaft of lower link.
2. Attach both lift brackets (3) inside the lower links (4) with the
lower link pins (1) as shown in the figure.
3. Connect the connecting rods (2) to the lift brackets (3) with clevis
pins, plain washers and cotter pins.
IMPORTANT
• Connect the lift rods (5) of the tractor as below, and adjust
the length of both lift rods equally with the turnbuckle of the
right lift rod.
(Reference)
B2410
B2710
Tractor lift rod and lower
link setting position
B1710
B2110
RCK54-24B-EC
RCK60-24B-EC
Connecting rod length
(L)
RCK60-27B-EC
(1) Lower Link Pin
(2) Connecting Rod
(3) Lift Bracket
(4) Lower Link
(5) Lift Rod
G-17
G GENERAL
(4) Pin (20 mm dia. × 135 mm length,
0.79 in. dia. × 5.31 in. length)
(5) Front Loader Frame
W1017268
A Position
B Position
620 mm
24.4 in.
665 mm
26.2 in.
A : Lift rod and lower link setting
position
B : Lift rod and lower link setting
position
W1017587
KiSC issued 11, 2006 A