The Abs Warning Light Comes On For 2 Seconds, Then Goes Off - Yamaha FZ8NA Service Manual

Hide thumbs Also See for FZ8NA:
Table of Contents

Advertisement

EAS4B56016
[B-4] THE ABS WARNING LIGHT COMES ON FOR 2 SECONDS, THEN GOES OFF
Remove the protective cap from the ABS test coupler "1", and then connect the test coupler adapter
"2" to the coupler. The T/C terminal (sky blue) is now grounded.
1. The fault code "1" is displayed on the multi-function display (example: fault code ABS_11).
2. The ABS warning light flashes every 0.5 second for more than 6 seconds.
The ABS warning light flashes every 0.5 second if a fault code for a past malfunction is not
stored in the memory of the ABS ECU. The ABS warning light flashes quicker if a fault code is
displayed on the multi-function display. If no fault code is displayed, make sure that the customer
understands the possible conditions that may cause the ABS warning light to come on or flash
even if the system is normal.
TIP
• The ABS fault codes will not be displayed if a fault code for the fuel injection system is displayed
on the multi-function display. To display the ABS fault codes, delete the fuel injection system fault
codes, and then start the check again.
• The test coupler adapter must be connected to the ABS test coupler to display the fault codes. If
the adapter is not connected, the ABS warning light will come on or flash, but no fault codes will be
displayed.
ABS (ANTI-LOCK BRAKE SYSTEM)
8-139

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FZ8NA and is the answer not in the manual?

This manual is also suitable for:

Fz8sa

Table of Contents

Save PDF