Declaration Of Conformity; Application; Technical Characteristics; Input - PR 2914 Manual

DEcLARATION OF cONFORMITy

As manufacturer
PR electronics A/S
Lerbakken 10
Dk-8410 Rønde
hereby declares that the following product:

Type: 2914

Name: 2-wire room temperature transmitter
is in conformity with the following directives and standards:
The EMC Directive 2004/108/EC and later amendments
EN 61326-1
For specification of the acceptable EMC performance level, refer to the
electrical specifications for the module .
Rønde, 12 April 2010
10
Kim Rasmussen
Manufacturer's signature
2-WIRE ROOM TEMPERATURE
TRANSMITTER 2914
• Room temperature measurement
• Complete with sensor and transmitter
• 4 . . .20 mA output in 2-wire connection
• Easy mounting
• Measurement range 0 . . .70°C
• Supply 8 . . .35 VDC

APPLIcATION:

Electronic temperature measurement in for instance control rooms, offices,
heating plants, factories, living rooms, and similar dry rooms . Suitable as a
transmitter for controllers, trip amplifiers, displays, or superior SCADA systems .

TEcHNIcAL cHARAcTERISTIcS:

The module is built around a microprocessor core with an efficient program
operation . The basic calibration data and the present set-up are stored in an
EEPROM thereby ensuring that the data is not lost or changed at power off . A
precision Pt100 sensor with a small mass is mounted on the transmitter input
thereby achieving a fast response time . The room temperature transmitter is
protected against polarity reversal .
The front of the cabinet is made of white ABS plastic, the bottom is made of black
PBT plastic . The bottom of the cabinet can be attached to a wall by two screws
and the front is then clipped on to the bottom plate . Visible cable connection
through a 10 mm cutout in the front of the cabinet . Covered cable connection
through a 16 mm cutout in the bottom plate of the cabinet .

INPUT:

The input is mounted at the factory .
11