The Functions; Basic Procedure In The Function Display - Yamaha PSR-EW400 Owner's Manual

The Functions

The "Functions" provide access to a range of detailed instrument parameters such as
Tuning, Split Point, Voices and Effects. Find the desired item in the Function List on
pages 58–61, then follow the instructions below.
Basic Procedure in the Function
Display
1
Press the [FUNCTION] button.
2
Press the CATEGORY [+] or [-] button
several times until the desired item
appears.
3
Use the dial, the [+/YES] and [-/NO] but-
tons, or the [0]–[9] number buttons to
set the value of the selected function.
Function List
Function Number
Function
PSR- PSR-
E453 EW400
Volume
001 001 Style Volume
002 002 Song Volume
003 003 Pattern Volume
[AUX IN] Audio
004 004
Volume
[USB TO HOST]
005 005
Audio Volume
Overall
006 006 Transpose
007 007 Tuning
008 008 Pitch Bend Range
009 009 Split Point
010 010 Touch Response
58
PSR-E453/PSR-EW400 Owner's Manual
Current item
SplitPnt
054
009
Current Function
number
Display Range/Settings
StyleVol 000–127
SongVol
000–127
PatrnVol 000–127
AuxInVol 000–127
USBInVol 000–127
Transpos -12–12
Tuning 427.0Hz–453.0Hz
PBRange
01–12
036–096
(C1–C6; PSR-E453)/
SplitPnt
028–103
(E0–G6; PSR-EW400)
1 (Soft), 2 (Medium),
TouchRes
3 (Hard), 4 (Fixed)
To restore the default value, press the [+/YES]
and [-/NO] buttons simultaneously. In the sole
case of the MIDI Initial Send function (Function
057), pressing the [+/YES] button executes the
function while pressing [-/NO] cancels it.
• Decrement Press simultane-
value by 1 ously to recall the
• Cancel default setting.
Some Function settings are maintained even if
you turn off the power, and can be transferred to a
computer as Backup Data (page 39).
NOTE
• To exit from a Function display, press the [VOICE],
[STYLE], [SONG] or [PATTERN] button.
Default
Value
100 Refer to page 53.
100 Refer to page 57.
100 Refer to page 53.
Adjusts the volume of audio playback, input from the [AUX IN]
50
jack (page 36).
Adjusts the volume of audio playback, input from the [USB TO
100
HOST] terminal (page 36, 37).
00 Refer to page 41.
440.0Hz Refer to page 41.
Sets the range over which you can control pitch by using the
02
[PITCH BEND] wheel (page 41), in semitone increments.
054 (F#2) Refer to page 53.
2 (Medium) Refer to page 42.
Direct
numeric entry
• Increment
value by 1
• Execute
Description