Try Playing a Variety of Instrument Voices
Using the Metronome
This instrument features a built-in metronome which
can be used when practicing.
Press the [METRONOME] button to start
Press the [METRONOME] button again
to stop the metronome.
Adjusting the Metronome Tempo
This operation lets you adjust not only the metro-
nome tempo, but also the tempo of Style, Song and
Press the [TEMPO/TAP] button to call up
The current tempo is shown on the display.
Adjust the tempo by rotating the dial.
Setting the Time Signature
Here, we'll set a time signature of 6/8 as an example.
Hold down the [METRONOME] button
for longer than a second to call up
"TimeSigN" (Time Signature Numera-
The number of beats per measure is shown on
Hold for longer
than a second.
PSR-E453/PSR-EW400 Owner's Manual
Number of beats
Rotate the dial to select the number of
beats per measure.
A chime will sound on the first beat of each mea-
sure while a click sounds the other beats. If "0" is
selected, a click sounds for all beats with no
chime accent. Select 6 for this example.
• This parameter cannot be set during playback of a Style,
Song or Pattern.
Press the CATEGORY [+] button once to
call up "TimeSigD" (Time Signature
The length of one beat is shown on the display.
Rotate the dial to select the length of
one beat, from 2
Select "08" (8
note) for this example.
Confirm the setting by playing the Met-
Setting the Metronome Volume
Press the [FUNCTION] button.
Use the CATEGORY [+] and [-] buttons to
call up "MtrVol" (Function 061).
Rotate the dial to set the volume.
The length of