Konica Minolta bizhub pro 1200P User Manual page 42

Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard)
9
Click [Browse].
10
Specify the desired folder on the Driver CD that contains the printer
driver, and then click the [Open].
– Select printer driver (PCL, PostScript PPD) to be used.
– For details of the built-in CD-ROM construction, see "Folder struc-
ture on the CD-ROM (bizhub PRO 1200/1200P/1051 Driver CD-
ROM)" on page 1-6.
11
Click the [OK].
The "Printer" list appears.
12
Click the [Next].
13
Follow the on-screen instructions.
– If the "User Account Control" window appears, click the [Continue].
14
Click the [Finish].
15
When the installation is completed, make sure that the icon of the in-
stalled printer appears in the Printers window.
16
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
Specify an IP address in [Add a printer] to install a printer driver
0 The installation should be performed by a qualified system administrator
or printer administrator.
1
Turn on the power of the machine while it is connected to the network.
– To allow printers to be detected during installation, the machine
must be connected to the network.
2
To use the Web Service print, check that "Network discovery" is
enabled in "Network and Sharing Center" on the computer.
3
Insert the Driver CD into the CD-ROM drive of the computer.
4
Click the [Start] button, and then click "Control Panel".
5
From "Hardware and Sound", click "Printer".
– If Control Panel is displayed with Classic View, double-click "Print-
ers".
bizhub PRO 1200/1200P/1051 Printer
4
4-11