Table of Contents
Advertisement
Blind Spot Monitoring (BSM) System
The Blind Spot Monitoring (BSM) system is designed to assist
the driver in checking the area to the rear of the vehicle on both
sides during lane changes by alerting the driver to the presence
of vehicles approaching from the rear in an adjacent lane.
The Blind Spot Monitoring (BSM) system detects vehicles approach-
ing from the rear while traveling in the forward direction at a speed of
6.3 mph (10 km/h) or faster and turns on the Blind Spot Monitoring
(BSM) warning lights equipped on the door mirrors depending on the
conditions. If the turn signal lever is operated to signal a lane change
in the direction in which the Blind Spot Monitoring (BSM) warning light
is illuminated, the system warns the driver of a vehicle in the detection
area by flashing the Blind Spot Monitoring (BSM) warning light and
activating a beep sound.
The detection area on this system
covers the driving lanes on both
sides of the vehicle and from the
rear part of the front doors to
about 164 ft. (50 m) behind the
vehicle.
YARIS_SEDAN_OM_OM99M18z_(U)
3-10. Active Safety System
Your vehicle
Detection areas
215
3
: If equipped
Advertisement
Table of Contents
