3
Turn the wing bolt and jack
screw counterclockwise.
■
To secure the jack
1
Insert the wing bolt into the jack with the jack screw pointing to
the right side and turn the wing bolt clockwise to temporarily
tighten it.
2
Turn the jack screw in the
direction shown in the figure.
3
Turn the wing bolt completely to secure the jack.
4
Return the trunk board to its original position.
■
Maintenance
● Always keep the jack clean.
● Make sure the moving parts are kept free from dirt or rust.
● Make sure the screw thread is adequately lubricated.
●
If the jack is not completely secured, it could rattle while driving. Make
sure the jack screw is sufficiently tightened.
●
Verify that the cover is securely installed.
YARIS_SEDAN_OM_OM99M18z_(U)
6-2. Flat Tire
Jack screw
Wing bolt
Jack screw
Wing bolt
509
6