Table of Contents
Advertisement
152
3-1. Start/Stop Engine
2
Press the push button start to switch the ignition position. The ignition
switches in the order of ACC, ON, and off each time the push button start
is pressed. To switch the ignition position again, perform the operation
from the beginning.
NOTICE
When starting the engine by holding the smart key over the push button
start due to a dead key battery or a malfunctioning key, be careful not to
allow the following, otherwise the signal from the key will not be received
correctly and the engine may not start.
●
Metal parts of other keys or metal
objects touch the key.
●
Spare keys or keys for other vehicles
equipped with an immobilizer system
touch or come near the key.
●
Devices for electronic purchases, or security passage touch or come near
the key.
Emergency Operation for Starting the Engine
If the KEY warning light (red) illuminates, or the push button start indi-
cator light (amber) flashes, this could indicate that the engine may not
start using the usual starting method. Have your vehicle inspected at
your Toyota dealer as soon as possible. If this occurs, the engine can
be force-started. Press and hold the push button start until the engine
starts. Other procedures necessary for starting the engine such as
having the key in the cabin, and depressing the clutch pedal (manual
transaxle) or the brake pedal (automatic transaxle) are required.
YARIS_SEDAN_OM_OM99M18z_(U)
Advertisement
Table of Contents
