Table of Contents
Advertisement
148
3-1. Start/Stop Engine
Starting the Engine
1
Make sure you are carrying the key.
2
Occupants should fasten their seat belts.
3
Make sure the parking brake is on.
4
Continue to press the brake pedal firmly until the engine has com-
pletely started.
5
Manual transaxle:
Continue to press the clutch pedal firmly until the engine has com-
pletely started.
The starter will not operate if the clutch pedal is not depressed sufficiently.
Automatic transaxle:
Put the vehicle in park (P). If you must restart the engine while the
vehicle is moving, shift into neutral (N).
The starter will not operate if the selector lever is not in P or N and the
brake pedal is not depressed sufficiently.
6
Verify that the KEY indicator
light (green) in the combination
meter and the push button start
indicator light (green) illumi-
nate.
If the push button start indicator
light (green) flashes, make sure
that the key is being carried.
If the push button start indicator
light (green) flashes with the key
being carried, touch the key to the
push button start and start the
engine. Refer to Engine Start Func-
tion When Key Battery is Dead on
P. 151.
7
Press the push button start after both the KEY indicator light
(green) in the combination meter and the push button start indicator
light (green) illuminate.
After starting the engine, the push button start indicator light (amber) turns
off and the ignition switches to the ON position.
YARIS_SEDAN_OM_OM99M18z_(U)
Indicator light
Push button start
Advertisement
Table of Contents
