●
In the following cases, the activation of the Blind Spot Monitoring (BSM)
warning lights and the warning beep may not occur or they may be delayed.
• A vehicle makes a lane change from a driving lane two lanes over to an
adjacent lane.
• Driving on steep slopes.
• Crossing the summit of a hill or mountain pass.
• The turning radius is small (making a sharp curve, turning at intersec-
tions).
• When there is a difference in the height between your driving lane and
the adjacent lane.
• Directly after pressing the Blind Spot Monitoring (BSM) switch and the
system becomes operable.
●
If the road width is extremely narrow, vehicles two lanes over may be
detected. The detection area of the radar sensors (rear) is set according to
the road width of expressways.
●
The Blind Spot Monitoring (BSM) warning lights may turn on in reaction to
stationary objects on the road or the roadside such as guardrails, tunnels,
sidewalls, and parked vehicles.
• Objects such as guardrails and con-
crete walls running alongside the
vehicle.
• Places where the width between
guardrails or walls on each side of the
vehicle narrows.
YARIS_SEDAN_OM_OM99M18z_(U)
3-10. Active Safety System
217
3