Toyota 2016 Yaris Owner's Manual page 366

366
4-3. Bluetooth
●
If the pairing failed, "Err" flashes for three seconds.
●
Pairing cannot be performed while the vehicle is moving. If you attempt to
perform pairing while the vehicle is moving, "PAIR DISABLE" is displayed.
●
If seven Bluetooth
pairing cannot be performed and "MEMORY FULL" is displayed. Delete one
paired device to pair another one.
●
If pairing cannot be completed, try "1234" instead. Refer to the owner's
manual of your mobile device for the right PIN code.
●
If a hands-free type mobile phone has been the most recently paired device,
the Bluetooth
audio type device which has been previously paired to the Bluetooth
the link must be changed to this device.
●
If an error occurs while trying to link a device, "Err" flashes in the audio dis-
play for three seconds, and the display returns to "LINK CHANGE". If this
occurs, check the pairing status of the Bluetooth
location of the device in the vehicle (not in the luggage compartment/trunk
or a metal-type box), and then try the link operation again.
●
When "GO BACK" is selected and the audio control dial is pressed, the dis-
play returns to "DEVICE INFO".
YARIS_SEDAN_OM_OM99M18z_(U)
®
®
audio devices have already been paired to the vehicle,
®
unit links this device. If you would like to use a Bluetooth
®
unit,
®
audio device and the
®