Table of Contents
Advertisement
5
Push the child-restraint system
firmly into the vehicle seat. Be
sure the belt retracts as snugly
as possible. A clicking noise
from the retractor will be heard
during retraction if the system is
in the automatic locking mode.
If the belt does not lock the seat
down tight, repeat this step.
Inspect this function before each use of the child-restraint system. You
should not be able to pull the shoulder belt out of the retractor while the
system is in the automatic locking mode. When you remove the child-
restraint system, be sure the belt fully retracts to return the system to
emergency locking mode before occupants use the seat belts.
6
If your child-restraint system requires the use of a tether strap, refer
to the manufacturer's instructions to hook and tighten the tether
strap.
Follow the child-restraint system manufacturer's instructions carefully. If you
are not sure whether you have a LATCH system or tether, check in the child-
restraint system manufacturer's instructions and follow them accordingly.
Depending on the type of child-restraint system, it may use LATCH system
instead of seat belts or if the belt goes across the child's chest, may recom-
mend against using automatic locking mode.
YARIS_SEDAN_OM_OM99M18z_(U)
1-3. Child Restraint
51
1
Advertisement
Table of Contents
