Page 1
Use of various features for ride comfort, including Interior Features air-conditioning and audio system. Maintenance and How to keep your Toyota in top condition. Care Helpful information on what to do if a problem If Trouble Arises arises with the vehicle.
TABLE OF CONTENTS How to Use This Manual....9 Before Driving Pictorial Index ......12 Essential Safety 2-1. Keys Equipment Keys........86 Keyless Entry System..88 1-1. Seats 2-2. Advanced Keyless Entry Seat Precautions....18 System Front Seat ......21 Advanced Keyless Entry Rear Seat ......
Page 3
2-9. Driving Tips When Driving Break-In Period ....131 Saving Fuel and Protection of the 3-1. Start/Stop Engine Environment....132 Ignition Switch ....146 Hazardous Driving..... 133 Starting the Engine ....148 Floor Mat ......134 Turning the Engine Off ..153 Rocking the Vehicle ..
Page 4
TABLE OF CONTENTS 3-6. ABS/TRAC/VSC Interior Features Antilock Brake System (ABS) ......202 Traction Control (TRAC) ... 203 4-1. Climate Control System Vehicle Stability Control Operating Tips ....258 (VSC) ......205 Vent Operation ....259 3-7. Fuel Economy Monitor Manual Type......261 Fuel Economy Monitor ..
Page 5
Maintenance and Care If Trouble Arises 5-1. Essential Information 6-1. Parking in an Emergency Introduction ....... 442 Parking in an Emergency ......506 5-2. Scheduled Maintenance 6-2. Flat Tire Maintenance Monitor..444 Spare Tire and Tool 5-3. Owner Maintenance Storage......507 Owner Maintenance Changing a Flat Tire ..
Page 6
Label (Placard) ....573 Defects (Canada).... 555 Tire Maintenance....576 7-2. Warranty Vehicle Loading ....579 Warranties for Your Toyota ......556 Steps for Determining the Correct Load Limit ...584 Outside the United States/Canada ....557 7-8. Declaration of Conformity Registering Your Vehicle...
Page 7
Specifications 8-1. Identification Numbers Vehicle Information Labels ......590 8-2. Specifications Specifications ....592 8-3. Customizable Features Customizable Features......598 Index Alphabetical index...... 610 YARIS_SEDAN_OM_OM99M18z_(U)
Page 8
Important Notes About This Manual Keep this manual in the glove box as a handy reference for the safe and enjoyable use of your Toyota. Should you resell the vehicle, leave this manual with it for the next owner. All specifications and descriptions are accurate at the time of print- ing.
Your owner’s manual, when read from cover to cover, can do that in many ways. Illustrations complement the words of the manual to best explain how to enjoy your Toyota. By reading your manual, you can find out about the features, important safety information, and driving under various road conditions.
Page 10
You’ll find several WARNINGs and NOTICEs in the manual. WARNING: Explains something that, if not obeyed, could cause death or serious injury to people. NOTICE: Explains something that, if not obeyed, could cause damage to or a malfunction in the vehicle or its equipment. The symbol below, located on some parts of the vehicle, indi- cates that this manual contains...
The front seats contain air bag compo- nents essential to the supplemental restraint system. Such modifications could damage the supplemental restraint system and result in serious injury. Consult your Toyota dealer if there is any need to remove or reinstall the front seats. ■...
Page 19
1-1. Seats WARNING ■ Do not drive with either front seats reclined Sitting in a reclined position while the vehicle is moving is dangerous because you do not get the full protection from seat belts. During sudden braking or a collision, you can slide under the lap belt and suffer serious internal injuries.
Page 20
1-1. Seats WARNING ■ Always leave your car locked and keep the car keys safely away from children Leaving your car unlocked or the keys in reach of children is dangerous. Children who find their way into the trunk through an unlocked rear seat- back or an open trunk can become accidentally locked in the trunk.
1-1. Seats Front Seat Seat Operation Seat Slide To move a seat forward or backward, raise the lever and slide the seat to the desired position and release the lever. Make sure the lever returns to its original position and the seat is locked in place by attempting to push it forward and backward.
Page 22
1-1. Seats Seat Warmer (if equipped) The front seats are electrically heated. The ignition must be switched Press the seat warmer switch to illuminate the indicator light while the ignition is switched ON. The mode changes as follows each time the seat warmer switch is pressed.
Page 23
1-1. Seats WARNING ■ Do not use the seat warmer even when taking a short nap in the vehicle The seat may be heated excessively and cause a low-temperature burn. ■ Do not place heavy objects with sharp projections on the seat, or insert needles or pins into it This could cause the seat to become excessively heated and result in injury from a minor burn.
1-1. Seats Rear Seat Split Folding the Seatback By lowering the rear seatback(s) the luggage compartment space can be expanded. WARNING ■ Do not drive the vehicle with occupants on folded down seatback(s) or in the luggage compartment. Putting occupants in the luggage compartment is dangerous because seat belts cannot be fastened which could lead to serious injury or death during sudden braking or a collision.
Page 25
1-1. Seats Lowering the seatback(s) Lower the head restraint all the way down. Refer to Head Restraints on P. 27. Open the trunk lid and pull the lever of the seatback you want to fold down. Open a rear door and fold the rear seat forward. NOTICE Check the position of a front seat before folding a rear seatback.
Page 26
1-1. Seats To return the seatback to its upright position Make sure that the seat belt passes through the seat belt guide correctly and it is not twisted, then raise the seatback while preventing the seat belt from being caught in the seat- Seat belt guide back.
1-1. Seats Head Restraints Your vehicle is equipped with head restraints on all outboard seats and the rear center seat. The head restraints are intended to help protect you and the passengers from neck injury. WARNING ■ Always drive with the head restraints installed when seats are being used and make sure they are properly adjusted.
Page 28
1-1. Seats ■ Rear outboard seat ■ Rear center seat Removal/Installation To remove the head restraint, pull it up while pressing the stop-catch. To install the head restraint, insert the legs into the holes while press- ing the stop-catch. YARIS_SEDAN_OM_OM99M18z_(U)
Page 29
1-1. Seats WARNING ■ Always drive with the head restraints installed when seats are being used and make sure they are properly installed ● Driving with the head restraints not installed is dangerous. With no support behind your head, your neck could be seriously injured in a collision. ●...
Seat Belt Precautions Seat belts help to decrease the possibility of severe injury dur- ing accidents and sudden stops. Toyota recommends that the driver and all passengers always wear seat belts. All of the seat belt retractors are designed to keep the lap/shoulder belts out of the way when not in use.
Page 31
Using a damaged seat belt is dangerous. An accident could damage the belt webbing of the seat belt in use. A damaged seat belt cannot provide adequate protection in a collision. Have your Toyota dealer inspect all seat belt systems in use during an accident before they are used again.
Page 32
1-2. Seat Belt Systems NOTICE Belt retraction may become difficult if the Ring belts and rings are soiled, so try to keep them clean. For more details about cleaning the seat belts, refer to “Cleaning the Lap/Shoulder Belt Webbing” (P. 503). Pregnant Women and Persons with Serious Medical Conditions Pregnant women should always wear seat belts.
Page 33
1-2. Seat Belt Systems Emergency Locking Mode When the seat belt is fastened, it will always be in the emergency locking mode. In the emergency locking mode, the belt remains comfortable on the occupant and the retractor will lock in position during a collision. If the belt is locked and cannot be pulled out, retract the belt once, and then try pulling it out slowly.
Then make sure it remains untwisted as it retracts. Button If a belt does not fully retract, inspect it for kinks and twists. If it is still not retracting properly, have it inspected at your Toyota dealer. YARIS_SEDAN_OM_OM99M18z_(U)
Page 35
1-2. Seat Belt Systems Front Shoulder Belt Adjuster To raise To lower Make sure the adjuster is locked. Seat Belt Warning Systems If it detects that the occupant seat belt is unfastened, the warning light or beep alerts the occupant. Refer to Warning/Indicator Lights on P.
1-2. Seat Belt Systems Seat Belt Pretensioner and Load Limiting Systems For optimum protection, the driver and front passenger seat belts are equipped with pretensioner and load limiting systems. For both these systems to work properly you must wear the seat belt properly.
Page 37
Even if the pretensioners have not fired, the load limiting function must be checked by your Toyota dealer. ● The pretensioner system may not operate depending on the type of the col- lision.
Page 38
Improper disposal of the pretensioner system or a vehicle with non-deacti- vated pretensioners is dangerous. Unless all safety procedures are fol- lowed, injury could result. Have your Toyota dealer safely dispose of the pretensioner system or scrap a pretensioner system equipped vehicle.
NEVER use the extender in a different vehicle or seat. If you sell your Toyota, do not leave your seat belt extender in the vehicle. It could be used accidentally by the new owner of the vehicle.
Page 40
1-2. Seat Belt Systems WARNING ■ Do not use an extender that is too long Using an extender that is too long is dangerous. The seat belt will not fit properly. In an accident, the seat belt will not provide adequate protection and you could be seriously injured.
1-3. Child Restraint Child-Restraint Precautions Toyota strongly urges the use of child-restraint systems for chil- dren small enough to use them. You are required by law to use a child-restraint system for chil- dren in the U.S. and Canada. Check your local and state or provincial laws for specific requirements regarding the safety of children riding in your vehicle.
Page 42
1-3. Child Restraint Even if the front passenger air bag is shut off, Toyota strongly recom- mends that children be properly restrained and child-restraint systems of all kinds are properly secured on the rear seats which are the best place for children.
Page 43
1-3. Child Restraint WARNING ■ Never use a rear-facing child-restraint system in the front seat with an air bag that could deploy Rear-facing child-restraint systems on the front seat are particularly dangerous even though you may feel assured that a front passenger air bag will not deploy based on the fact that the front passen- ger air bag deactivation indicator light...
Page 44
1-3. Child Restraint WARNING ■ Seating a child in a child-restraint system on the front passenger seat is dangerous under certain conditions Your vehicle is equipped with front passenger occupant classification sen- sor. Even with the front passenger occupant classification sensor, if you must use the front passenger seat to seat a child, using a child-restraint system on the front passenger seat under the following conditions increases the danger of the front passenger air bag deploying and could...
Page 45
1-3. Child Restraint WARNING ■ Do not allow a child or anyone to lean over or against the side window of a vehicle with side and curtain air bags It is dangerous to allow anyone to lean over or against the side window, the area of the front passenger seat, the front and rear window pillars and the roof edge along both sides from which the side and curtain air bags deploy, even if a child-restraint system is used.
1-3. Child Restraint Child-Restraint System Installation Child-Restraint System Types In this owner’s manual, explanation of child-restraint systems is pro- vided for the following three types of popular child-restraint systems: infant seat, child seat, booster seat. Infant seat Child seat An infant seat provides restraint A child seat restrains a child’s by bracing the infant’s head, neck...
Page 47
1-3. Child Restraint ● Installation position is determined by the type of child-restraint system. Always read the manufacturer’s instructions and this owner’s manual care- fully. ● Due to variations in the design of child-restraint systems, vehicle seats and seat belts, all child-restraint systems may not fit all seating positions. Before purchasing a child-restraint system, it should be tested in the specific vehi- cle seating position (or positions) where it is intended to be used.
Some child-restraint systems now come with tethers and therefore must be installed on the seats that take tethers to be effective. In your Toyota, tethered child-restraint systems can only be accommodated in the three positions on the rear seat. Some child-restraint systems also employ specially designed LATCH attachments;...
Page 49
1-3. Child Restraint Anchor Bracket Anchor brackets for securing child-restraint systems are equipped in the vehicle. Locate each anchor position using the illustration. To install a child-restraint system, if the seat is equipped with a head restraint, remove it. Always follow the instruction manual accompany- ing the child-restraint system.
Page 50
1-3. Child Restraint WARNING ■ Always install the head restraint and adjust it to the appropriate posi- tion after removing the child-restraint system Driving with the head restraint removed is dangerous as impact to the occu- pant’s head cannot be prevented during emergency braking or in a collision, which could result in a serious accident, injury or death.
Page 51
1-3. Child Restraint Push the child-restraint system firmly into the vehicle seat. Be sure the belt retracts as snugly as possible. A clicking noise from the retractor will be heard during retraction if the system is in the automatic locking mode. If the belt does not lock the seat down tight, repeat this step.
Page 52
1-3. Child Restraint WARNING ■ Use the tether and tether anchor only for a child-restraint system Using the tether or tether anchor to secure anything but a child-restraint system is dangerous. This could weaken or damage the tether or tether anchor and result in injury.
Page 53
1-3. Child Restraint If You Must Use the Front Seat for Children If you cannot put all children in the rear seat, at least put the smallest children in the rear and be sure the largest child up front uses the shoulder belt over the shoulder.
Page 54
1-3. Child Restraint WARNING ■ Always move the front passenger seat as far back as possible if install- ing a front-facing child-restraint system on it is unavoidable As your vehicle has front air bags and doubly so because your vehicle has side air bags, a front-facing child-restraint system should be put on the front passenger seat only when it is unavoidable.
Page 55
1-3. Child Restraint WARNING ■ Always remove the head restraint and install child-restraint system Installing a child-restraint system without removing the head restraint is dangerous. The child-restraint system cannot be installed correctly which may result in death or injury to the child in a collision. ■...
Page 56
1-3. Child Restraint Push the child-restraint system firmly into the vehicle seat. Be sure the belt retracts as snugly as possible. A clicking noise from the retractor will be heard during retraction if the system is in automatic locking mode. If the belt does not lock the seat down tight, repeat the previous step and also this one.
Page 57
Toyota dealer as soon as possible. Using LATCH Lower Anchor Your Toyota is equipped with LATCH lower anchors for attachment of specially designed LATCH child-restraint systems in the rear seats.
Page 58
1-3. Child Restraint WARNING ■ Never attach two child-restraint systems to the same LATCH lower anchor Attaching two child-restraint systems to the same LATCH lower anchor is dangerous. In a collision, one anchor may not be strong enough to hold two child-restraint system attachments, and it may break, causing serious injury or death.
Page 59
1-3. Child Restraint Expand the open seams on the rear of the seat bottom slightly to verify the locations of the LATCH lower anchors. The markings above the LATCH lower anchors indicate the loca- tions of the LATCH lower anchors for the attachment of a child- restraint system.
Page 60
1-3. Child Restraint WARNING ■ Always attach the tether strap to the correct tether anchor position Attaching the tether strap to the incorrect tether anchor position is danger- ous. In a collision, the tether strap could come off and loosen the child- restraint system.
Page 61
1-3. Child Restraint ■ LATCH lower anchor location WARNING ■ Always remove the head restraint and install child-restraint system Installing a child-restraint system without Tether strap removing the head restraint is danger- ous. The child-restraint system cannot be installed correctly which may result in death or injury to the child in a collision.
1-4. SRS Air Bags Supplemental Restraint System (SRS) Pre- cautions The front and side supplemental restraint systems (SRS) include up to 6 air bags. Please verify which kinds of air bags are equipped on your vehicle by locating the “SRS AIRBAG” location indicators. These indi- cators are visible in the area where the air bags are installed.
Page 63
● Should you sell your Toyota, we urge you to tell the new owner of its air bag systems and that familiarization with all instructions about them, from the Owner’s Manual, is important.
Page 64
1-4. SRS Air Bags WARNING ■ Seat belts must be worn in air bag equipped vehicles Depending only on the air bags for protection during an accident is danger- ous. Alone, air bags may not prevent serious injuries. The appropriate air bags can be expected to inflate only in the first accident, such as frontal, near frontal or side collisions or roll-over accidents that are at least moder- ate.
Page 65
1-4. SRS Air Bags WARNING ■ Sit in the center of the seat and wear seat belts properly Sitting too close to the side air bag modules or placing hands on them, or sleeping up against the door or hanging out the windows is extremely dan- gerous.
Page 66
Do not use tires or wheels other than those specified for your Toyota: Use of any tire or wheel other than those specified for your Toyota (P. 596) is dangerous. Use of such wheels will prevent the vehicle’s accident detec-...
Page 67
It also includes installing extra electrical equipment on or near system components or wiring. Your Toyota dealer can provide the special care needed in the removal and installation of front seats. It is important to protect the air bag...
Page 68
Improper disposal of an air bag or a vehicle with live air bags in it can be extremely dangerous. Unless all safety procedures are followed, injury could result. Have your Toyota dealer safely dispose of the air bag system or scrap an air bag equipped vehicle.
1-4. SRS Air Bags Supplemental Restraint System Compo- nents Side and curtain inflators and air bags Side crash sensors Driver/Front passenger inflators and air bags Air bag/seat belt pretensioner system warning light (P. 164) Roll-over sensor, crash sensors, and diagnostic module (SAS unit) Front passenger air bag deactivation indicator light (P.
1-4. SRS Air Bags How the SRS Air Bags Work Your Toyota is equipped with the following types of SRS air bags. SRS air bags are designed to work together with the seat belts to help to reduce injuries during an accident. The SRS air bags are designed to provide further protection for passengers in addition to the seat belt functions.
Page 71
1-4. SRS Air Bags ◆ Front Passenger Air Bag The front passenger air bag is mounted in the front passenger dashboard. The inflation mechanism for the front passenger air bag is the same as the driver’s air bag, as mentioned above. For more details about air bag deployment, refer to “SRS Air Bag Deployment Criteria”...
Page 72
1-4. SRS Air Bags ◆ Curtain Air Bags The curtain air bags are mounted in the front and rear window pil- lars, and the roof edge along both sides. When the air bag crash sensors detect a side impact of greater than moderate force, the curtain air bag inflates quickly and helps to reduce injury mainly to the rear outboard passenger’s head caused by directly hitting interior parts such as a door or window.
Page 73
1-4. SRS Air Bags ◆ Warning Light/Beep A system malfunction or operation conditions are indicated by a warning. Refer to Warning/Indicator Lights on P. 164. Refer to Warning Sound is Activated on P. 547. YARIS_SEDAN_OM_OM99M18z_(U)
1-4. SRS Air Bags SRS Air Bag Deployment Criteria This chart indicates the applicable SRS equipment that will deploy depending on the type of collision. (The illustrations are the representative cases of collisions.) Types of collision A severe A roll-over/ A severe frontal/near A rear colli- side colli-...
Page 75
1-4. SRS Air Bags X: The SRS air bag equipment is designed to deploy in a collision. The front passenger front and side air bags and the seat belt pretensioner are designed to deploy when the front passenger occupant classification sensor detects a passenger sitting on the front passenger’s seat.
1-4. SRS Air Bags Limitations to SRS Air Bag In severe collisions such as those described previously in “SRS Air Bag Deployment Criteria”, the applicable SRS air bag equip- ment will deploy. However, in some accidents, the equipment may not deploy depending on the type of collision and its sever- ity.
Page 77
1-4. SRS Air Bags Limitations to side collision detection The following illustrations are examples of side collisions that may not be detected as severe enough to deploy the SRS air bag equipment. Side impacts involving trees or poles Side impacts with two-wheeled vehicles Limitations to roll-over detection The following illustration is an example of an accident that may not be...
1-4. SRS Air Bags Front Passenger Occupant Classification System First, please read “Supplemental Restraint System (SRS) Pre- cautions” (P. 62) carefully. Front Passenger Occupant Classification Sensor Your vehicle is equipped with a front passenger occupant classifica- tion sensor as a part of the supplemental restraint system. This sen- sor is equipped in the front passenger’s seat cushion.
Page 79
1-4. SRS Air Bags ■ Front passenger air bag deactivation indicator light This indicator light turns on to remind you that the front pas- senger front and side air bags and seat belt pretensioner will not deploy during a collision. If the front passenger occupant classification sensor is normal, the indicator light turns on when the ignition is switched ON.
Page 80
Toyota dealer as soon as possi- ble. The system may not work properly in an accident.
Page 81
1-4. SRS Air Bags WARNING ■ Do not allow an occupant in the front passenger’s seat to sit with a posture which makes it difficult for the front passenger occupant clas- sification sensor to detect the occupant correctly Sitting in the front passenger’s seat with a posture which makes it difficult for the front passenger occupant classification sensor to detect the occu- pant correctly is dangerous.
Page 82
1-4. SRS Air Bags WARNING ■ Do not allow an occupant in the front passenger’s seat to sit with a posture which makes it difficult for the front passenger occupant clas- sification sensor to detect the occupant correctly ● A seat cover is put on the front passenger’s seat. ●...
1-4. SRS Air Bags Constant Monitoring The following components of the air bag systems are monitored by a diagnostic system: ● Crash sensors, and diagnostic module (SAS unit) ● Front air bag sensors ● Air bag modules ● Side crash sensors ●...
Page 84
1-4. SRS Air Bags YARIS_SEDAN_OM_OM99M18z_(U)
Before Driving 2-1. Keys 2-7. Windows Keys ........86 Power Windows ....121 Keyless Entry System ..88 2-8. Security System 2-2. Advanced Keyless Entry Modification and System Add-On Equipment ..125 Advanced Keyless Entry Immobilizer System... 126 System ......95 Theft Deterrent System..
(auxiliary key). Also write down the code number and keep it in a separate safe and convenient place, but not in the vehicle. If your key (auxiliary key) is lost, consult your Toyota Dealer and have your code number ready. YARIS_SEDAN_OM_OM99M18z_(U)
Page 87
• The key contacts or is covered by a metal object. • The key is near electronic devices such as personal computers. • Non-Toyota genuine electronic equipment is installed in the vehicle. • There is equipment which discharges radio waves near the vehicle.
If you have a problem with the key, consult your Toyota dealer. If your key is lost or stolen, consult your Toyota dealer as soon as pos- sible for a replacement and to make the lost or stolen key inoperative.
● Additional keys can be obtained at your Toyota dealer. Up to 6 keys can be used with the keyless functions per vehicle. Bring all keys to your Toyota dealer when additional keys are required.
Page 90
2-1. Keys ■ Lock button To lock the doors and the trunk lid, press the lock button and the hazard warning lights will flash once. With the advanced keyless function: A beep sound will be heard once. To confirm that all doors and the trunk lid have been locked, press the lock button again within 5 seconds.
Page 91
2-1. Keys ■ Panic button If you witness from a distance someone attempting to break into or damage your vehicle, press and hold the panic button to activate the vehicle’s alarm. ● Turning on the alarm Pressing the panic button for 1 second or more will trigger the alarm for about 2 minutes and 30 seconds, and the following will occur: •...
Page 92
2-1. Keys ■ Smart Key ● The headlights turn on/off by operating the smart key. Refer to Leaving Home Light System on P. 186. ● With theft deterrent system: The hazard warning lights flash when the theft deterrent system is armed or turned off.
2-1. Keys ■ Unlock button ● The system can be set to unlock all doors by performing a single operation. Refer to Customizable Features on P. 598. Use the following procedure to change the setting. Switch the ignition off and close all of the doors and the trunk lid. Open the driver’s door Within 30 seconds of opening the driver’s door, press and hold the UNLOCK button on the key for 5 seconds or longer.
2-1. Keys Operational Range The system operates only when the driver is in the vehicle or within operational range while the key is being carried. ■ Starting the Engine Without the advanced keyless With the advanced keyless function function Interior antenna Interior antenna...
If the system is deactivated, you will be unable to start the engine by carrying the key. Consult your Toyota dealer for details. If the advanced key- less entry system has been deactivated, you can start the engine by following the procedure indicated when the key battery goes dead.
Page 96
2-2. Advanced Keyless Entry System Operational Range The system operates only when the driver is in the vehicle or within operational range while the key is being carried. ■ Locking, Unlocking the Doors and the Trunk Lid Operational range Exterior antenna 31 in.
2-3. Door and Locks Door Locks When the ignition is switched to ACC or ON, the vehicle lock-out pre- vention feature prevents you from locking yourself out of the vehicle. All doors and the trunk lid will automatically unlock if they are locked using the power door locks with any door or the trunk lid open.
Page 98
2-3. Door and Locks WARNING ■ Always take all children and pets with you or leave a responsible per- son with them Leaving a child or a pet unattended in a parked vehicle is dangerous. In hot weather, temperatures inside a vehicle can become high enough to cause brain damage or even death.
Page 99
2-3. Door and Locks Locking, Unlocking with Key All doors and the trunk lid lock automatically when the driver’s door is locked using the key. All doors and the trunk lid unlock when the driver’s door is unlocked and the key is held in the unlock position for one second or longer. Turn the key toward the front to lock, toward the back to unlock.
Page 100
2-3. Door and Locks ■ To unlock ● Driver’s door request switch To unlock the driver’s door, press the request switch. A beep sound will be heard twice and the hazard warning lights will flash twice. To unlock all doors and the trunk lid, press the request switch again within 3 seconds and two more beep sounds will be heard.
Page 101
2-3. Door and Locks ● A beep sound is heard for confirmation when the doors and the trunk lid are locked/unlocked using the request switch. If you prefer, the beep sound can be turned off. The volume of the beep sound can also be changed. Refer to Customizable Features on P.
Page 102
2-3. Door and Locks ● Auto re-lock function: After unlocking with the request switch, all doors and the trunk lid will auto- matically lock if any of the following operations are not performed within about 60 seconds. If your vehicle has a theft deterrent system, the hazard warning lights will flash for confirmation.
Page 103
2-3. Door and Locks Auto Lock/Unlock Function ● When the vehicle speed exceeds 12 mph (20 km/h), all doors and the trunk lid lock automatically. ● When the ignition is switched off, all doors and the trunk lid unlock automatically. These functions can also be disabled so that they do not operate.
Page 104
2-3. Door and Locks : Other settings for the auto door lock function are available at your Toyota dealer. For details consult your Toyota dealer. Refer to Customizable Features on P. 598. Settings can be changed using the following procedure.
Page 105
2-3. Door and Locks Automatic transaxle vehicles Current Function Number Press unlock side of lock switch once Function Number 1 Press 2 times Press lock side of lock switch Function Number 2 Press 3 times Cancel setting Function Number 3 Press 4 times Function Number 4 Wait for 3 second...
Page 106
2-3. Door and Locks Locking, Unlocking with Door-Lock Knob ■ Operation from inside Lock To lock any door from the inside, press the door-lock knob. Unlock To unlock, pull it outward. This does not operate the other door locks. ■ Operation from outside To lock any door with the door- Door-lock knob...
Page 107
2-3. Door and Locks Rear Door Child Safety Locks These locks are intended to help prevent children from accidentally opening the rear doors. Use them on both rear doors whenever a child rides in the rear seat of the vehicle. Unlock Lock If you slide the child safety lock to...
2-3. Door and Locks Trunk Lid WARNING ■ Never allow a person to ride in the trunk Allowing a person to ride in the trunk is dangerous. The person in the trunk could be seriously injured or killed during sudden braking or a collision. ■...
Page 109
2-3. Door and Locks Opening and Closing the Trunk Lid ■ Opening the trunk lid Push the release button. ■ Closing the trunk lid Use both hands to push the trunk lid down until the lock snaps shut. Do not slam it. Pull up on the trunk lid to make sure it is secure. ■...
Page 110
2-3. Door and Locks Place the second golf bag in the trunk with its bottom pointed to the left and fit it into the back of the trunk. Some golf bags cannot fit depending on their size. Inside Trunk Release Lever (if equipped) Your vehicle is equipped with an inside trunk release lever that pro- vides a means of escape for children and adults in the event they become locked inside the trunk.
Page 111
2-3. Door and Locks ■ Opening the Trunk Lid from the Inside Slide the inside trunk release lever in the direction of the arrow. The lever is made of material that will glow for hours in the darkness of the trunk fol- lowing a brief exposure to ambi- ent light.
Stop using gasohol of any kind if your vehicle engine is performing poorly. ● Never add fuel system additives, otherwise the emission control system could be damaged. Consult your Toyota dealer for details. YARIS_SEDAN_OM_OM99M18z_(U)
Page 113
● USE ONLY UNLEADED FUEL. ● Do not drive your Toyota with any sign of engine malfunction. ● Do not coast with the ignition switched off. ● Do not descend steep grades in gear with the ignition switched off.
Page 114
Engine exhaust gas is dangerous. This gas contains carbon monoxide (CO), which is colorless, odorless, and poisonous. When inhaled, it can cause loss of consciousness and death. If you smell exhaust gas inside the vehicle, keep all windows fully open and contact your Toyota dealer immedi- ately. ■...
NOTICE Always use only a genuine Toyota fuel-filler cap or an approved equivalent, available at your Toyota dealer. The wrong cap can result in a serious mal- function of the fuel and emission control systems. It may also cause the check engine light in the combination meter to illuminate.
Page 116
2-4. Fuel and Emission Fuel-Filler Lid To open, pull the remote fuel-filler lid release. To close, press the fuel-filler lid until it locks securely. Remote fuel-filler lid release Fuel-Filler Cap Open To remove the fuel-filler cap, turn it counterclockwise. Attach removed cap to the inner side of the fuel lid.
2-5. Steering Wheel Steering Wheel Steering Wheel Adjustment To change the angle or length of the steering wheel: Stop the vehicle, and then pull Lock release down the lock release lever lever under the steering column. Tilt the steering wheel and/or adjust steering column...
2-6. Mirrors Mirrors Before driving, adjust the inside and outside mirrors. Outside Mirrors ■ Mirror type Flat type (driver’s side) Flat surface mirror. Convex type (front passenger side) The mirror has single curvature on its surface. ■ Power mirror adjustment The ignition must be switched to ACC or ON position.
Page 119
2-6. Mirrors ■ Folding mirror Fold the outside mirror rear- ward until it is flush with the vehicle. WARNING ■ Be sure to look over your shoulder before changing lanes Changing lanes without taking into account the actual distance of the vehi- cle in the convex mirror is dangerous.
Page 120
2-6. Mirrors ■ Reducing glare from headlights Adjust the mirror with the day/night lever in the day position. Push the day/night lever for- Day/Night lever ward for day driving. Pull it back to reduce glare of headlights from vehicles at the rear. Night WARNING ■...
2-7. Windows Power Windows The ignition must be switched ON for the power windows to operate. A power window may no longer open/close if you continue to press the switch after fully opening/closing the power window. If the power window does not open/close, wait a moment and then operate the switch again.
Page 122
2-7. Windows ■ Auto-opening/closing To fully open the window automatically, press the switch completely down, then release. The window will fully open automatically. To fully close the window automatically, pull the switch completely up, then release. The window will fully close automatically. To stop the window partway, pull or press the switch in the opposite direction and then release it.
Page 123
2-7. Windows ■ Jam-safe window ● Depending on driving conditions, a closing power window could stop and start opening when the window feels a shock that is similar to something blocking it. In the event the jam-safe function activates and the power window cannot be closed automatically, pull and hold the switch and the window will close.
2-7. Windows ● The power windows may be operated when the power window lock switch on the driver’s door is in the unlocked position. ● The passenger windows may be opened or closed using the master control switches on the driver’s door. Driver’s window Master control switches Front passenger’s window...
2-8. Security System Modification and Add-On Equipment Toyota cannot guarantee the immobilizer and the theft deterrent systems’ operation if the system has been modified or if any add-on equipment has been installed. NOTICE To avoid damage to the vehicle, do not modify the system or install any add- on equipment to the immobilizer and the theft deterrent systems or the vehi- cle.
Always keep a spare key in case one is lost. If a key is lost, consult your Toyota dealer as soon as possible. ● If you lose a key, your Toyota dealer will reset the electronic codes of your remaining keys and immobilizer system. Bring all the remaining keys to your Toyota dealer to reset.
Page 127
If the security indicator light flashes continuously while you are driving, do not shut off the engine. Go to your Toyota dealer and have it checked. If the engine is shut off while the indicator light is flashing, you will not be able to restart it.
2-8. Security System Theft Deterrent System If the theft deterrent system detects an inappropriate entry into the vehicle, which could result in the vehicle or its contents being stolen, the alarm alerts the surrounding area of an abnor- mality by sounding the horn and flashing the hazard warning lights.
Page 129
2-8. Security System How to Arm the System Close the windows securely. Switch the ignition OFF. Make sure the hood, the doors, and the trunk lid are closed. Press the lock button on the smart key or lock the driver’s door from the outside with the auxiliary key.
Page 130
The hazard warning lights will flash twice. Theft Deterrent Labels A label indicating that your vehicle is equipped with a Theft Deterrent System is in the glove compart- ment. Toyota recommends that you affix it to the lower rear corner of a front door window. YARIS_SEDAN_OM_OM99M18z_(U)
2-9. Driving Tips Break-In Period No special break-in is necessary, but a few precautions in the first 600 miles (1,000 km) may add to the performance, economy, and life of the vehicle. ● Do not race the engine. ● Do not maintain one constant speed, either slow or fast, for a long period of time.
2-9. Driving Tips Saving Fuel and Protection of the Environment How you operate your Toyota determines how far it will travel on a tank of fuel. Use these suggestions to help save fuel and reduce CO2. ● Avoid long warm-ups. Once the engine runs smoothly, begin driv- ing.
2-9. Driving Tips Hazardous Driving When driving on ice or in water, snow, mud, sand, or similar hazards: ● Be cautious and allow extra distance for braking. ● Avoid sudden braking and sudden maneuvering. ● Do not pump the brakes. Continue to press down on the brake pedal.
2-9. Driving Tips Floor Mat When setting a floor mat, position the floor mat so that its grommets are inserted over the pointed end of the retention posts. WARNING ■ Make sure the floor mats are hooked on the retention pins to prevent them from bunching up under the foot pedals Using a floor mat that is not secured is dangerous as it will interfere with the accelerator and brake pedal operation, which could result in an accident.
2-9. Driving Tips Rocking the Vehicle If you must rock the vehicle to free it from snow, sand or mud, depress the accelerator slightly and slowly move the shift lever from 1 (D) to R. WARNING ■ Do not spin the wheels at more than 35 mph (56 km/h), and do not allow anyone to stand behind a wheel when pushing the vehicle When the vehicle is stuck, spinning the wheels at high speed is dangerous.
Carry emergency gear, including tire chains, window scraper, flares, a small shovel, jumper cables, and a small bag of sand or salt. Ask your Toyota dealer to check the following: ● Have the proper ratio of antifreeze in the radiator.
Page 137
Check local regulations before using tire chains. Install the chains on the front tires only. Do not use chains on the rear tires. Please consult your Toyota dealer. ■ Installing the chains If your vehicle is equipped with wheel covers remove them, oth- erwise the chain bands will scratch them.
Page 138
2-9. Driving Tips WARNING ■ Driving with tire chains ● Chains may affect handling. ● Do not go faster than 30 mph (50 km/h) or the chain manufacturer’s rec- ommended limit, whichever is lower. ● Drive carefully and avoid bumps, holes, and sharp turns. ●...
Light braking will indicate whether the brakes have been affected. NOTICE Do not drive the vehicle on flooded roads as it could cause short circuiting of electrical/electronic parts, or engine damage or stalling from water absorption. If the vehicle has been immersed in water, consult your Toyota dealer. YARIS_SEDAN_OM_OM99M18z_(U)
2-9. Driving Tips Overloading WARNING ■ Be careful not to overload your vehicle The gross axle weight rating (GAWR) and the gross vehicle weight rat- ing (GVWR) of the vehicle are on the Motor Vehicle Safety Standard Label on the driver’s door frame. Exceeding these ratings can cause an accident or vehicle damage.
2-9. Driving Tips Driving on Uneven Road Your vehicle’s suspension and underbody can be damaged if driven on rough/uneven roads or over speed bumps at exces- sive speeds. Use care and reduce speed when traveling on rough/uneven roads or over speed bumps. Use care not to damage the vehicle’s underbody, bumpers or muf- fler(s) when driving under the following conditions: ●...
2-10. Towing Recreational Towing An example of “recreational towing” is towing your vehicle behind a motorhome. The transaxle is not designed for towing this vehicle on all 4 wheels. When doing recreational towing refer to “Towing Description” (P. 529) and “Tiedown Hooks” (P. 530) and carefully follow the instructions. YARIS_SEDAN_OM_OM99M18z_(U)
When Driving 3-1. Start/Stop Engine 3-6. ABS/TRAC/VSC Ignition Switch ....146 Antilock Brake System (ABS) ......202 Starting the Engine ... 148 Traction Control (TRAC) ... 203 Turning the Engine Off ..153 Vehicle Stability Control 3-2. Combination Meter and (VSC) ......
3-1. Start/Stop Engine Ignition Switch Push Button Start Positions The system operates only when the driver is in the vehicle or within operational range while the key is being carried. Each time the push button start is pressed, the ignition switches in the order of off, ACC, and ON.
Page 147
3-1. Start/Stop Engine ■ Push Button Start Positions ● The engine starts by pressing the push button start while depressing the clutch pedal (manual transaxle) or the brake pedal (automatic transaxle). To switch the ignition position, press the push button start without depressing the pedal.
3-1. Start/Stop Engine Starting the Engine Make sure you are carrying the key. Occupants should fasten their seat belts. Make sure the parking brake is on. Continue to press the brake pedal firmly until the engine has com- pletely started. Manual transaxle: Continue to press the clutch pedal firmly until the engine has com- pletely started.
Page 149
Consult your Toyota dealer for details. If the push button start sys- tem functions have been deactivated, you can start the engine by following the procedure indicated when the key battery goes dead.
Page 150
(amber) flashes, this could indicate a problem with the engine starting system and the inability to start the engine or switch the ignition to ACC or ON. Have your vehicle inspected at your Toyota dealer as soon as possible. YARIS_SEDAN_OM_OM99M18z_(U)
Page 151
If there is a malfunction with the push button start function, the push button start indicator light (amber) flashes. In this case, the engine may start, how- ever, have the vehicle checked at your Toyota dealer as soon as possible. ●...
Page 152
(amber) flashes, this could indicate that the engine may not start using the usual starting method. Have your vehicle inspected at your Toyota dealer as soon as possible. If this occurs, the engine can be force-started. Press and hold the push button start until the engine starts.
3-1. Start/Stop Engine Turning the Engine Off Stop the vehicle completely. Manual transaxle: Shift into neutral and set the parking brake. Automatic transaxle: Shift the selector lever to the P position and set the parking brake. Press the push button start to turn off the engine. The ignition posi- tion is off.
3-2. Combination Meter and Display Meters and Gauges Combination meter Speedometer (P. 154) Dashboard Illumination (P. 158) Odometer, Trip Meter and Trip Meter Selector (P. 155) Fuel Gauge (P. 157) Outside Temperature Display (P. 159) Tachometer (P. 157) ■ Steering Switch (if equipped) Trip Computer and INFO Switch (P.
Page 155
3-2. Combination Meter and Display Odometer, Trip Meter and Trip Meter Selector The display mode can be changed from odometer to trip meter A to trip meter B and then back to odometer by pressing the selector while one of them is displayed. The selected mode will be displayed. Odometer Trip meter A Trip meter B...
Page 156
3-2. Combination Meter and Display ■ Odometer The odometer records the total distance the vehicle has been driven. ■ Trip meter The trip meter can record the total distance of two trips. One is recorded in trip meter A, and the other is recorded in trip meter B. For instance, trip meter A can record the distance from the point of origin, and trip meter B can record the distance from where the fuel tank is filled.
Page 157
3-2. Combination Meter and Display Tachometer The tachometer shows engine speed in thousands of revolutions per minute (rpm). Striped zone Red zone The range varies depending on the type of gauge. When the tachometer needle enters the STRIPED ZONE, this indicates to the driver that the gears should be shifted before entering the RED ZONE.
Page 158
3-2. Combination Meter and Display ● After refueling, it may require some time for the indicator to stabilize. In addi- tion, the indicator may deviate while driving on a slope or curve since the fuel moves in the tank. ● The display indicating a quarter or less remaining fuel has more segments to show the remaining fuel level in greater detail.
Page 159
3-2. Combination Meter and Display Outside Temperature Display When the ignition is switched ON, the outside temperature is dis- played. The outside temperature unit can be switched between Celsius and Fahrenheit using the following procedure. Press the INFO button with the ignition switched off and continue pressing the INFO button for 5 seconds or longer while switching the ignition ON.
Page 160
• Approximate distance you can travel on the available fuel • Average fuel economy • Current fuel economy • Average vehicle speed If you have any problems with your trip computer, consult your Toyota dealer. ■ Distance-to-empty mode This mode displays the approximate distance you can travel on the remaining fuel based on the fuel economy.
Page 161
3-2. Combination Meter and Display ■ Current fuel economy mode This mode displays the current fuel economy by calculating the amount of fuel consumption and the distance traveled. Current fuel economy will be calculated and displayed every 2 sec- onds. When you’ve slowed to about 3 mph (5 km/h), - - - mpg (- - - L/100 km) will be displayed.
3-2. Combination Meter and Display Active Driving Display Mirror Combiner Optical receiver The active driving display indicates the following information: • Low Speed Pre-Collision System Operation Conditions Refer to Low Speed Pre-Collision System on P. 227. • Vehicle Speed Setting Using Cruise Control Refer to Cruise Control on P.
Page 163
3-2. Combination Meter and Display ● It may be difficult to view the display when wearing sunglasses. Take off your sunglasses or adjust the luminosity. ● If the battery has been removed and re-installed or the battery voltage is low, the adjusted position may deviate. ●...
3-2. Combination Meter and Display Warning/Indicator Lights Combination Meter Analog Speedometer Type Center of Dashboard (With Tachometer) Warning/Indicator lights will appear in any of the highlighted areas YARIS_SEDAN_OM_OM99M18z_(U)
Page 165
If the light does not turn on or remains turned on, have the vehicle inspected at your Toyota dealer. : The light turns on continuously when the parking brake is applied.
3-2. Combination Meter and Display Indicator Lights These lights turn on or flash to notify the user of the system operation status or a system malfunction. Blind Spot Monitoring Headlight High-Beam (BSM) OFF Indicator Indicator Light Light (P. 221) (P. 185, 185) Turn Signal/Hazard KEY Indicator Light Warning Indicator Lights...
Page 167
If the low engine coolant tempera- ture indicator light remains illumi- nated after the engine has been sufficiently warmed up, the tem- perature sensor could have a mal- function. Consult your Toyota dealer. YARIS_SEDAN_OM_OM99M18z_(U)
3-3. Transaxle Manual Transaxle Operation Manual Transaxle Shift Pattern The shift pattern of the transaxle is conventional, as shown. Depress the clutch pedal all the way down while shifting; then Neutral position release it slowly. Your vehicle is equipped with a device to prevent shifting to R (reverse) by mistake.
Page 169
3-3. Transaxle NOTICE ● Keep your foot off the clutch pedal except when shifting gears. Also, do not use the clutch to hold the vehicle on an upgrade. Riding the clutch will cause needless clutch wear and damage. ● Do not apply any excessive lateral force to the shift lever when changing from 5th to 4th gear.
Page 170
To avoid the risk of accidents, the road and traffic conditions have to be judged correctly by the driver before shifting. Recommendations for Shifting ■ Upshifting For normal acceleration, Toyota recommends these shift points: Gear Vehicle speed 1 to 2 17 mph (27 km/h)
Page 171
3-3. Transaxle ■ Downshifting When you must slow down in heavy traffic or on a steep upgrade, downshift before the engine starts to overwork. This reduces the chance of stalling and gives better acceleration when you need more speed. On a steep downgrade, downshifting helps maintain safe speed and prolongs brake life.
3-3. Transaxle Automatic Transaxle Controls Lock-release button Various Lockouts: Indicates that you must depress the brake pedal and hold in the lock-release button to shift (The ignition must be switched ON). Indicates the selector lever can be shifted freely into any position.
Page 173
3-3. Transaxle Shift Position Indication The selector position is indicated when the ignition is switched ON. ■ Gear position indication In manual shift mode, the “M” of the shift position indication illumi- nates and the numeral for the selected gear is displayed. Warning Light The warning light turns on when the system has a malfunction.
Page 174
3-3. Transaxle ■ M (Manual) M is the manual shift mode position. Gears can be shifted up or down by operating the selector lever. Refer to Manual Shift Mode on P. 176. WARNING ■ Always set the selector lever to P and set the parking brake when park- Only setting the selector lever to the P position without using the parking brake to hold the vehicle is dangerous.
Page 175
3-3. Transaxle Active Adaptive Shift (AAS) Active Adaptive Shift (AAS) automatically controls the transaxle shift points to best suit the road conditions and driver input. This improves driving feel. The transaxle may switch to AAS mode when driving up and down slopes, cornering, driving at high elevations, or depressing the accelerator pedal quickly while the selector lever is in the D posi- tion.
Page 176
Press and hold the lock-release button. Move the selector lever. Take the vehicle to your Toyota dealer to have the system checked. Manual Shift Mode The manual shift mode gives you the feel of driving a manual tran- saxle vehicle by allowing you to operate the selector lever manually.
Page 177
3-3. Transaxle ■ Indicators Manual shift mode indication In manual shift mode, the “M” of the shift position indication in the instrument panel illuminates. Gear position indication The numeral for the selected gear illuminates. ■ Manually shifting up You can shift gears up by operating the shift lever or the steering shift switches (if equipped).
Page 178
3-3. Transaxle ■ Manually shifting down You can shift gears down by operating the shift lever or the steering shift switches (if equipped). M6 M5 M4 M3 M2 M1 ● Using selector lever To shift down to a lower gear, tap the selector lever forward once.
Page 179
3-3. Transaxle ■ Shift gear (shifting) speed limit For each gear position while in the manual mode, the speed limit is set as follows: When the selector lever is operated within the range of the speed limit, the gear is shifted. 60 mph 0 mph (0 km/h)
Page 180
3-3. Transaxle ■ Recommendations for shifting ● Upshifting For normal acceleration and cruising, Toyota recommends these shift points: Gear Vehicle speed M1 to M2 15 mph (24 km/h) M2 to M3 25 mph (40 km/h) M3 to M4 40 mph (65 km/h)
Page 181
3-3. Transaxle ■ Manually shifting up ● When driving slowly, the gears may not shift up. ● In manual shift mode, do not run the engine with the tachometer needle in the RED ZONE. When the engine rpm is high, a gear may shift up automat- ically to protect the engine.
Page 182
3-3. Transaxle Direct Mode (if equipped) Direct mode can be used for temporarily switching gears by operating the steering shift switch while the vehicle is being driven with the selector lever in the D range. While in direct mode, the D and M indication illuminate and the gear position in use is illuminated.
Page 183
3-3. Transaxle Driving Tips ■ Passing For extra power when passing another vehicle or climbing steep grades, depress the accelerator fully. The transaxle will shift to a lower gear, depending on vehicle speed. Some models: The accelerator pedal may initially feel heavy as it is being depressed, then feel lighter as it is depressed further.
3-4. Switches and Controls Lighting Control Headlights Turn the headlight switch to turn headlights, other exterior lights and dashboard illumination on or off. When the lights are turned on, the lights-on indicator light in the com- bination meter turns on. Switch Position Ignition Position Headlights...
Page 185
3-4. Switches and Controls Headlight High-Low Beam The headlights switch between high and low beams by moving the lever forward or backward. High beam Low beam When the headlight high-beams are on, the headlight high-beam indicator light is turned on. Flashing the Headlights Can be used when the ignition is switched ON.
Page 186
3-4. Switches and Controls Coming Home Light System The coming home light system turns on the headlights (low beams) when the lever is operated. ■ To turn on the system When the lever is pulled with the ignition switched to ACC or OFF, the low beam headlights turn on.
Page 187
3-4. Switches and Controls ■ To turn on the system When the ignition switch and the headlight switch are as indicated below, the headlights will illuminate when the smart key unlock but- ton is pressed and the vehicle receives the smart key signal. The headlights turn off after a certain period of time has elapsed (30 seconds).
3-4. Switches and Controls Fog Lights Use this switch to turn on the fog lights. The fog lights will improve visibility at night and during foggy conditions. The foglights can be used when the ignition is switched ON. The fog lights turn on when the fog light switch is turned to the position and turn off when the switch is turned to the...
3-4. Switches and Controls Turn and Lane-Change Signals The ignition must be switched ON to use the turn and lane-change signals. Turn Signals Move the signal lever down (for a Right turn left turn) or up (for a right turn) to Right lane change the stop position.
Page 190
3-4. Switches and Controls Three-Flash Turn Signal After releasing the turn signal lever, the turn signal indicator flashes three times. The operation can be cancelled by moving the lever in the direction opposite to which it was operated. The three-flash turn signal function can be switched to operable/inoperable using the customization function.
After 5 minutes, turn on the switch and the blades should operate normally. If they do not resume functioning, consult your Toyota dealer as soon as possi- ble. Drive to the side of the road and park off the right-of-way. Wait until the weather clears before trying to drive with the wipers inoperative.
Page 192
3-4. Switches and Controls Windshield Wipers Turn the wipers on by pressing the lever up or down. Switch Position Wiper operation Single wipe cycle (mist) Intermittent Low speed High speed ■ Variable-speed intermittent wipers Set the lever to the intermittent Slow position and choose the interval timing by rotating the ring.
Page 193
Pull the lever toward you and hold it to spray washer fluid. If the washer does not work, inspect the fluid level (P. 459). If the fluid level is normal, consult your Toyota dealer. With the wiper lever in the position, the wipers will operate contin- uously until the lever is released.
3-4. Switches and Controls Rear Window Defogger The rear window defogger clears fog from the rear window. The ignition must be switched ON to use the defogger. Press the switch to turn on the Indicator light rear window defogger. The rear window defogger operates for about 15 minutes and then turns off automatically.
3-4. Switches and Controls Hazard Warning Flasher The hazard warning lights should always be used when you stop on or near a roadway in an emergency. The hazard warning lights warn other drivers that your vehicle is a traffic hazard and that they must take extreme caution when near Depress hazard...
3-5. Brake Brake System Foot Brake This vehicle has power-assisted brakes that adjust automatically through normal use. Should power-assist fail, you can stop by applying greater force than normal to the brake pedal. But the distance required to stop will be greater than usual.
Page 197
3-5. Brake NOTICE Do not drive with your foot held on the clutch pedal or brake pedal, or hold the clutch pedal depressed halfway unnecessarily. Doing so could result in the following: ● The clutch and brake parts will wear out more quickly. ●...
Page 198
This causes a screeching noise to warn that the pads should be replaced. When you hear this noise, consult your Toyota dealer as soon as pos- sible. WARNING ■ Do not drive with worn disc pads Driving with worn disc pads is dangerous.
Page 199
3-5. Brake Brake Assist During emergency braking situations when it is necessary to depress the brake pedal with greater force, the brake assist system provides braking assistance, thus enhancing braking performance. When the brake pedal is depressed hard or depressed more quickly, the brakes apply more firmly.
3-5. Brake Hill Start Assist Hill Start Assist is a function which assists the driver in acceler- ating from a stop while on a slope. When the driver releases the brake pedal and depresses the accelerator pedal while on a slope, the function prevents the vehicle from rolling.
Page 201
3-5. Brake WARNING ■ Do not rely completely on Hill Start Assist Hill Start Assist is an auxiliary device for accelerating from a stop on a slope. The system only operates for about two seconds and therefore, rely- ing only on the system, when accelerating from a stop is dangerous because the vehicle may move (roll) unexpectedly and cause an accident.
3-6. ABS/TRAC/VSC Antilock Brake System (ABS) The ABS control unit continuously monitors the speed of each wheel. If one wheel is about to lock up, the ABS responds by automatically releasing and reapplying that wheel’s brake. The driver will feel a slight vibration in the brake pedal and may hear a chattering noise from the brake system.
3-6. ABS/TRAC/VSC Traction Control (TRAC) The Traction Control (TRAC) enhances traction and safety by controlling engine torque and braking. When the TRAC detects driving wheel slippage, it lowers engine torque and operates the brakes to prevent loss of traction. This means that on a slick surface, the engine adjusts automati- cally to provide optimum power to the drive wheels, limiting wheel spin and loss of traction.
Page 204
If the light stays on, the TRAC, VSC or the brake assist system may have a malfunction and they may not operate correctly. Take your vehicle to your Toyota dealer. ● In addition to the indicator light flashing, a slight lugging sound will come from the engine.
The VSC may not operate correctly unless the following are observed: • Use tires of the correct size specified for your Toyota on all four wheels. • Use tires of the same manufacturer, brand and tread pattern on all four wheels.
Page 206
VSC is switched off. Refer to VSC OFF Switch on P. 206. If the light remains illuminated and the TRAC/VSC is not switched off, take your vehicle to your Toyota dealer. The VSC may have a mal- function. VSC OFF Switch Press the VSC OFF switch to turn off the TRAC/VSC.
Page 207
3-6. ABS/TRAC/VSC ● When VSC is on and you attempt to free the vehicle when it is stuck, or drive it out of freshly fallen snow, the TRAC (part of the VSC system) will activate. Depressing the accelerator will not increase engine power and freeing the vehicle may be difficult.
3-7. Fuel Economy Monitor Fuel Economy Monitor For vehicles with type B audio, the Control Status and Fuel Con- sumption are switched and displayed by operating each icon in the display. In addition, after completing a trip, the total energy efficiency to date is displayed in the ending display when the ending display is turned on.
Page 209
3-7. Fuel Economy Monitor Fuel Consumption Display Information regarding the fuel economy is displayed. Displays the fuel economy for the past 60 minutes. • Displays the fuel economy every minute for the past 1 to 10 minutes. • Displays the fuel economy every 10 minutes for the past 10 to 60 minutes.
● When the sport mode is selected, driving at higher engine speeds increases and it may increase fuel consumption. Toyota recommends that you cancel the sport mode on normal driving. ● Drive mode cannot be switched in the following conditions: •...
Page 211
3-8. Drive Selection Select Mode Indicator Light When the sport mode is selected, the select mode indicator light turns on in the combination meter. If the mode cannot be switched to drive mode, the select mode indicator light flashes to notify the driver. YARIS_SEDAN_OM_OM99M18z_(U)
If the steering feels stiffer than usual during normal driving or the steering vibrates, consult your Toyota dealer. ● The warning light notifies the driver of system abnormalities and operation conditions.
3-10. Active Safety System Active Safety System Active Safety System is a collective term covering a series of advanced safety and driver support systems which make use of a Forward Sensing Camera (FSC) and radar sensors. These sys- tems consist of active safety and pre-crash safety systems. These systems are designed to assist the driver in safer driving by reducing the load on the driver and helping to avert collisions or reduce their severity.
Page 214
3-10. Active Safety System ◆ Camera and sensors ● Laser sensor The laser sensor emits a near-infrared laser beam and receives the beam reflected off the reflective surface of a vehicle or obstruction in front, and the detected beam is then used for mea- surement.
3-10. Active Safety System Blind Spot Monitoring (BSM) System The Blind Spot Monitoring (BSM) system is designed to assist the driver in checking the area to the rear of the vehicle on both sides during lane changes by alerting the driver to the presence of vehicles approaching from the rear in an adjacent lane.
Page 216
If the Blind Spot Monitoring (BSM) OFF indicator light remains illuminated, have the vehicle inspected at your Toyota dealer as soon as possible. • Some problem with the system including the Blind Spot Monitoring (BSM) warning lights is detected.
Page 217
3-10. Active Safety System ● In the following cases, the activation of the Blind Spot Monitoring (BSM) warning lights and the warning beep may not occur or they may be delayed. • A vehicle makes a lane change from a driving lane two lanes over to an adjacent lane.
Page 218
3-10. Active Safety System • The walls at the entrance and exits of tunnels, turnouts. ● A Blind Spot Monitoring (BSM) warning light may flash or the warning beep may be activated several times when making a turn at a city intersection. ●...
Page 219
3-10. Active Safety System Blind Spot Monitoring (BSM) Warning Lights/Blind Spot Monitor- ing (BSM) Warning Beep The Blind Spot Monitoring (BSM) or Rear Cross Traffic Alert (RCTA) system notifies the driver of the presence of vehicles in adjacent lanes to the rear of your vehicle using the Blind Spot Monitoring (BSM) warning lights and the warning beep while the systems are opera- tional.
Page 220
3-10. Active Safety System ● Forward driving (Blind Spot Monitoring (BSM) system operation) The Blind Spot Monitoring (BSM) system detects vehicles approaching from the rear and turns on the Blind Spot Monitoring (BSM) warning lights equipped on the door mirrors according to the conditions.
Page 221
● A malfunction in the system may be indicated under the following conditions. Have your vehicle inspected at your Toyota dealer. • The light does not turn on when the ignition is switched ON. • The light remains turned on even if the Blind Spot Monitoring (BSM) switch is operated.
Page 222
3-10. Active Safety System ● When the ignition is switched off, the condition before the system was turned off is maintained. For example, if the ignition is switched OFF while the Blind Spot Monitoring (BSM) and Rear Cross Traffic Alert (RCTA) sys- tems are operational, the Blind Spot Monitoring (BSM) and Rear Cross Traf- fic Alert (RCTA) systems remain operational the next time the ignition is switched ON.
3-10. Active Safety System Rear Cross Traffic Alert (RCTA) The Rear Cross Traffic Alert (RCTA) system is designed to assist the driver in checking the area to the rear of the vehicle on both sides while the vehicle is reversing by alerting the driver to the presence of vehicles approaching the rear of the vehicle.
Page 224
If the Blind Spot Monitoring (BSM) OFF indicator light remains illuminated, have the vehicle inspected at your Toyota dealer as soon as possible. • Some problem with the system including the Blind Spot Monitoring (BSM) warning lights has occurred.
Page 225
3-10. Active Safety System ● Under the following conditions, the radar sensors (rear) cannot detect target objects or it may be difficult to detect them. • The vehicle speed when reversing is about 6 mph (10 km/h) or faster. • The radar sensor (rear) detection Your vehicle area is obstructed by a nearby wall or parked vehicle.
Page 226
3-10. Active Safety System WARNING ■ Always check the surrounding area visually before actually putting the vehicle in reverse The system is only designed to assist you in checking for vehicles at the rear when putting the vehicle in reverse. Due to certain limitations with the operation of this system, the Blind Spot Monitoring (BSM) warning light may not flash or it might be delayed even though a vehicle is behind your vehi- cle.
3-10. Active Safety System Low Speed Pre-Collision System Low Speed Pre-Collision System is designed to reduce damage in the event of a collision by operating the brake control (Low Speed Pre-Collision System brake) when the system’s laser sen- sor detects a vehicle ahead and determines that a collision with a vehicle ahead is unavoidable.
Page 228
3-10. Active Safety System ● The Low Speed Pre-Collision System will not operate if the driver is deliber- ately performing driving operations (accelerator pedal and steering wheel). ● The Low Speed Pre-Collision System will operate under the following condi- tions. •...
Page 229
3-10. Active Safety System ● In the following cases, the laser sensor may inadvertently determine that there is a vehicle ahead and the Low Speed Pre-Collision System may oper- ate. • Objects on the road at the entrance to a curve. •...
Page 230
• If cracks or damage caused by flying gravel or debris is visible near the laser sensor, stop using the Low Speed Pre-Collision System immediately and have your vehicle inspected by your Toyota dealer. If the vehicle continues to be driven with cracks or scratch marks left on the windshield near the laser sensor, the system may operate unnec- essarily and cause an unexpected accident.
Page 231
3-10. Active Safety System WARNING ■ Do not modify the suspension If the vehicle height or inclination is changed, the system will not be able to correctly detect vehicles ahead. This will result in the Low Speed Pre-Colli- sion System not operating normally or mistakenly operating, which could cause a serious accident.
Page 232
3-10. Active Safety System Stopping the Low Speed Pre-Collision System Operation The Low Speed Pre-Collision System can be temporarily deactivated. When the Low Speed Pre-Colli- sion System is turned off, the Low Speed Pre-Collision System OFF indicator light turns on. When the engine is restarted, the system becomes operational.
3-10. Active Safety System Laser Sensor The Low Speed Pre-Collision System laser sensor is installed at the top of the windshield near the rearview mirror. Always keep the surface of the windshield around the laser sen- sor clean to assure proper opera- tion of the Low Speed Pre- Collision System.
Page 234
3-10. Active Safety System WARNING Laser sensor radiation data Maximum average power: 45 mW Pulse duration: 33 ns Wavelength: 905 nm Divergence angle (horizontal vertical): 28 degrees 12 degrees YARIS_SEDAN_OM_OM99M18z_(U)
3-10. Active Safety System Radar Sensors (Rear) Your vehicle is equipped with radar sensors (rear). The following systems also use the radar sensors (rear). ● Blind Spot Monitoring system (BSM) ● Rear Cross Traffic Alert (RCTA) The radar sensors (rear) function by detecting the radio waves reflected off a vehicle approaching from the rear or an obstruc- tion sent from the radar sensor.
Page 236
Toyota dealer. ● For repairs or replacement of the radar sensors (rear), or bumper repairs, paintwork, and replacement near the radar sensors, consult your Toyota dealer. ● Turn off the system while pulling a trailer or while an accessory such as a bicycle carrier is installed to the rear of the vehicle.
3-11. Cruise Control Cruise Control With cruise control, you can set and automatically maintain any speed of more than about 16 mph (25 km/h). WARNING ■ Do not use the cruise control under the following conditions Using the cruise control under the following conditions is dangerous and could result in loss of vehicle control.
3-11. Cruise Control Cruise Main Indicator Light (Amber)/Cruise Set Indicator Light (Green) The indicator light has two colors. ● Cruise Main Indicator Light (Amber) The indicator light illuminates amber when the cruise control sys- tem is activated. ● Cruise Set Indicator Light (Green) The indicator light illuminates green when a cruising speed has been set.
3-11. Cruise Control To Set Speed Activate the cruise control system by pressing the ON switch. The cruise main indicator light (Amber) illuminates. Accelerate to the desired speed, which must be more than 16 mph (25 km/h). Set the cruise control by pressing the SET or SET switch at the desired speed.
Page 240
3-11. Cruise Control To Increase Cruising Speed Follow either of these procedures. ■ To increase speed using cruise control switch Press the SET switch and hold it. Your vehicle will accelerate. Release the switch at the speed you want. Press the SET switch and release it immediately to adjust the preset speed.
3-11. Cruise Control To Resume Cruising Speed at More Than 16 mph (25 km/h) If some other method besides the OFF switch was used to cancel cruising speed (such as applying the brake pedal) and the system is still activated, the most recent set speed will automatically resume when the RESUME switch is pressed.
3-12. Tire Pressure Monitoring System Tire Pressure Monitoring System The Tire Pressure Monitoring System (TPMS) monitors the air pressure of all four tires. If the air pressure of one or more tires is too low, the system warns the driver by indicating the tire pressure monitoring system warning light in the combination meter and operating a beep sound.
Page 243
3-12. Tire Pressure Monitoring System Because this system detects slight changes in tire conditions, the timing of the warning may be faster or slower in the following cases: ● The size, manufacturer, or the type of tires is different from the specifica- tion.
Page 244
3-12. Tire Pressure Monitoring System NOTICE ● Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should deter- mine the proper tire inflation pressure for those tires.) As an added safety feature, your vehicle has been equipped with a tire...
Page 245
3-12. Tire Pressure Monitoring System Tire Pressure Monitoring System Initialization In the following cases, system initialization must be performed so that the system operates normally. ● A tire pressure is adjusted. ● Tire rotation is performed. ● A tire or wheel is replaced. ●...
If the camera temperature changes rapidly (Hot to cold, cold to hot), the rear view monitor may not operate correctly. ● When replacing the tires, consult your Toyota dealer. Replacing the tires could result in deviation of the guide lines which appear on the display. ●...
Page 247
3-13. Rear View Monitor NOTICE ● Do not apply excessive force to the camera. The camera position and angle may deviate. ● Do not disassemble, modify, or remove it as it may no longer be water- proof. ● The camera cover is made of plastic. Do not apply degreasing agents, organic solvents, wax, or glass coating agents to the camera cover.
Page 248
3-13. Rear View Monitor Displayable Range on the Screen The images on the screen may be different from the actual conditions. ● Screen display Trunk lid Bumper ● Actual view Object YARIS_SEDAN_OM_OM99M18z_(U)
Page 249
3-13. Rear View Monitor ● The displayable range varies depending on the vehicle and road conditions. ● The displayable range is limited. Objects under the bumper or around the bumper ends cannot be displayed. ● The distance appearing in the displayed image is different from the actual distance because the rear view parking camera is equipped with a specific lens.
Page 250
3-13. Rear View Monitor Viewing the Display Guide lines which indicate the width of the vehicle (yellow) are dis- played on the screen as a reference to the approximate width of the vehicle in comparison to the width of the parking space you are about to back into.
Page 251
3-13. Rear View Monitor Rear View Monitor Operation The operation of the rear view monitor when reversing the vehicle var- ies depending on the traffic, road, and vehicle conditions. The amount of steering and the timing also varies depending on conditions, so confirm the surrounding conditions directly with your eyes and steer the vehicle in accordance with the conditions.
Page 252
3-13. Rear View Monitor Once they are parallel, straighten the wheels and back your vehicle slowly into the parking space. Continue checking the vehicle’s sur- roundings and then stop the vehicle in the best possible position. (If the parking space has division lines, check whether the vehicle width guide lines are parallel to them.) (Display condition) (Vehicle condition)
Page 253
3-13. Rear View Monitor • When parking in a space with a divi- sion line on only one side of the park- ing space, the division line and the vehicle width guide line may appear parallel on the monitor, but they may not actually be parallel on the ground.
Page 254
3-13. Rear View Monitor ■ When there is a steep grade behind the vehicle When there is a steep upgrade (downgrade) behind the vehicle, the object displayed on the screen appears farther (downgrade: closer) than the actual distance. Appears Appears farther than closer than actual distance...
Page 255
3-13. Rear View Monitor Picture Quality Adjustment Picture quality adjustment can be done while the shift lever is in reverse (R). There are four settings which can be adjusted including, brightness, contrast, tint, and color. When adjusting, pay sufficient attention to the vehicle surroundings.
Interior Features 4-1. Climate Control System Operating Tips ....258 Vent Operation....259 Manual Type ..... 261 4-2. Audio System Antenna......268 Operating Tips for Audio System ......269 Audio Set (Type A).... 283 Audio Set (Type B).... 299 Audio Control Switch Operation ......
Check the label before refilling the refrigerant. If the wrong type of refrigerant is used, it could result in a serious malfunction of the air conditioner. For details, consult your Toyota dealer. YARIS_SEDAN_OM_OM99M18z_(U)
4-1. Climate Control System Vent Operation Adjusting the Vents ■ Directing airflow To adjust the direction of airflow, move the adjustment knob. Center vents (driver) and Side Center vents (front passenger) vents Air vent open/close Air vent open/close Open Open Close...
Page 260
4-1. Climate Control System Selecting the Airflow Mode Dashboard Vents Defroster and Floor Vents Dashboard and Floor Vents Defroster Vents Floor Vents YARIS_SEDAN_OM_OM99M18z_(U)
4-1. Climate Control System Manual Type Temperature control dial Mode selector dial A/C switch Air intake selector (recirculated air mode) Fan control dial Air intake selector Rear window defogger switch (outside air mode) YARIS_SEDAN_OM_OM99M18z_(U)
Page 262
4-1. Climate Control System Control Switches ■ Temperature control dial This dial controls temperature. Turn it clockwise for hot and coun- terclockwise for cold. ■ Fan control dial This dial allows variable fan speeds. Dial Fan speed Fan off Low speed Medium low speed Medium high speed High speed...
Page 263
4-1. Climate Control System ■ Control Switches ● When the mode is set to with the fan control dial in a posi- tion other than 0 and the temperature control dial in the maximum cold posi- tion, the air intake selector switches to the recirculated air position and the A/C turns on automatically.
Page 264
4-1. Climate Control System Heating Set the mode selector dial to the position. Set the air intake selector to the outside air position. Set the temperature control dial to the hot position. Set the fan control dial to the desired speed. If dehumidified heating is desired, turn on the air conditioner.
Page 265
4-1. Climate Control System Cooling Set the mode selector dial to the position. Set the temperature control dial to the cold position. Set the fan control dial to the desired speed. Turn on the air conditioner by pressing the A/C switch. After cooling begins, adjust the fan control dial and temperature control dial as needed to maintain maximum comfort.
Page 266
4-1. Climate Control System Ventilation Set the mode selector dial to the position. Set the air intake selector to the outside air position. Set the temperature control dial to the desired position. Set the fan control dial to the desired speed. Windshield Defrosting and Defogging Set the mode selector dial to the position.
Page 267
4-1. Climate Control System Dehumidifying Operate the air conditioner in cool or cold weather to help defog the windshield and side windows. Set the mode selector dial to the desired position. Set the air intake selector to the outside air position. Set the temperature control dial to the desired position.
4-2. Audio System Antenna Embedded Type (if equipped) The antenna is embedded into the window glass. NOTICE When washing the inside of the window which has an antenna, use a soft cloth dampened in lukewarm water, gently wiping the antenna lines. Use of glass cleaning products could damage the antenna.
4-2. Audio System Operating Tips for Audio System Do not spill any liquid on the audio system. Do not insert any objects, other than CDs, into the slot. ● To prevent the battery from being discharged, do not leave the audio system on for a long period of time when the engine is not running.
Page 270
4-2. Audio System Radio Reception ■ AM characteristics AM signals bend around such things as buildings or mountains and bounce off the ionosphere. Therefore, they can reach longer distances than FM signals. Because of this, two stations may sometimes be picked up on the same frequency at the same time.
Page 271
4-2. Audio System Signals from an FM transmitter are similar to beams of light because they do not bend around corners, but they do reflect. Unlike AM signals, FM signals cannot travel beyond the horizon. Therefore, FM stations cannot be received at the great distances possible with AM reception.
Page 272
4-2. Audio System ● Multipath noise Since FM signals can be reflected by obstructions, it is possible to receive both the direct signal and the reflected signal at the same time. This causes a slight delay in reception and may be heard as a broken sound or a distortion.
Page 273
4-2. Audio System ● Strong signal noise This occurs very close to a transmitter tower. The broad- cast signals are extremely strong, so the result is noise and sound breakup at the radio receiver. ● Station drift noise When a vehicle reaches the area of two strong stations broad- casting at similar frequencies, the original station may be tempo- rarily lost and the second station picked up.
Page 274
4-2. Audio System ■ Handling the CD player The following precautions should be observed. ● Do not use deformed or cracked CDs. The disc may not eject resulting in a mal- function. ● Do not use non-conventional discs such as heart-shaped, octagonal discs, etc.
Page 275
4-2. Audio System ● A new CD may have rough edges on its inner and outer perimeters. If a disc with rough edges is used, proper setting will not be possible and the CD player will not play the CD. In addition, the disc may not eject resulting in a malfunction.
Page 276
4-2. Audio System ● Be sure never to touch the signal surface when handling the CDs. Pick up a CD by grasping the outer edge or the edge of the hole and the outer edge. ● Do not stick paper or tape on the CD. Avoid scratching the reverse side (the side without a label).
Page 277
4-2. Audio System ● This unit may not be able to play certain discs made using a computer due to the application (writing software) setting used. (For details, consult the store where the application was pur- chased.) ● It is possible that certain text data, such as titles, recorded on a CD-R/CD-RW may not be displayed when musical data (CD-DA) is playing.
Page 278
4-2. Audio System NOTICE Do not use an audio file extension on files other than audio files. In addition, do not change the audio file extension. Otherwise, the unit will not recog- nize the file correctly resulting in noise or a malfunction. Operating Tips for WMA WMA is short for Windows Media Audio and is the audio compression format used by Microsoft.
Page 279
4-2. Audio System Operating Tips for AAC AAC stands for Advanced Audio Coding, which is standardized voice compression established by the ISO working group (MPEG). Audio data can be created and stored at a higher compression ratio than MP3. This unit plays files with the extensions (.aac/.m4a/.wav ) as the AAC files.
Page 280
4-2. Audio System Operating Tips for OGG OGG is the audio compression format for Xiph. Org Foundation. Audio data can be created and stored at a higher compression ratio than MP3. This unit plays files with the extension (.ogg) as OGG files. ●...
Page 281
4-2. Audio System ■ Operating Tips for USB device ● Playback may not be possible depending on the type and condition of the USB flash memory even if the audio file complies with the standard above. ● A copyright protected WMA/AAC file cannot be played in this unit. ●...
Page 282
● If data in the iPod is lost while it is connected to the unit, Toyota cannot guarantee recovery of any lost data. ●...
4-2. Audio System Audio Set (Type A) ● Power/Volume/Sound Controls (P. 284) ● Clock (P. 287) ● Operating the Radio (P. 288) ● Operating the Compact Disc (CD) Player (P. 291) ● How to use Auxiliary jack/USB port (P. 298) ●...
Page 284
4-2. Audio System Power/Volume/Sound Controls Audio display Menu button Power/Volume/Audio control dial ■ Power ON/OFF Switch the ignition to ACC or ON. Press the power/volume dial to turn the audio system on. Press the power/volume dial again to turn the audio system off. ■...
Page 285
4-2. Audio System ■ Audio sound adjustment Press the menu button ( ) to select the function. The selected function will be indicated. Turn the audio control dial to adjust the selected functions as fol- lows: Setting value Indication Turn Counterclockwise Turn Clockwise (Automatic volume Level decrease...
Page 286
4-2. Audio System ● ALC (Automatic volume adjustment) The automatic level control (ALC) changes the audio volume auto- matically according to the vehicle speed. The faster the vehicle speed, the higher the volume increases. ALC has ALC OFF and ALC LEVEL 1 to 7 modes. At ALC LEVEL 7, the amount that the volume can increase is at the maximum.
Page 287
4-2. Audio System Clock :00 button Audio control dial Audio display Clock button Menu button Hour/Minute set switch ■ Setting the time The clock can be set at any time when the ignition is switched to ACC or ON. To adjust the time, press the clock button ( ) for about 2 seconds until a beep is heard.
Page 288
4-2. Audio System ■ Time resetting Press the clock button ( ) for about 2 seconds until a beep is heard. Press the :00 button (1). When the button is pressed, the time will be reset as follows: (Example) 12:01 - 12:2912:00 12:30 - 12:591:00 ●...
Page 289
4-2. Audio System ■ Tuning The radio has the following tuning methods: Manual, Seek, Scan, Preset channel, and Auto memory tuning. The easiest way to tune stations is to set them on preset channels. ● Manual tuning Select the station by pressing the tuning button ( lightly.
Page 290
4-2. Audio System ● Auto memory tuning This is especially useful when driving in an area where the local stations are not known. Press and hold the auto memory button ( ) for about 2 sec- onds until a beep is heard; the system will automatically scan and temporarily store up to 6 stations with the strongest frequen- cies in each selected band in that area.
Page 291
4-2. Audio System Operating the Compact Disc (CD) Player (if equipped) Repeat button Folder down button Random button CD eject button Text button CD slot Audio display Media/Scan button Play/Pause button Track up/Fast-forward button Folder up button Track down/Reverse button Type Playable data •...
Page 292
4-2. Audio System ■ Inserting the CD Insert the CD into the slot, label-side up. The auto-loading mecha- nism will set the CD and begin play. ■ Ejecting the CD Press the CD eject button ( ) to eject the CD. ■...
Page 293
4-2. Audio System ■ Music scan ● During music CD playback This function scans the titles on a CD and plays 10 seconds of each song to aid you in finding a song you want to listen to. Press and hold the scan button ( ) during playback to start the scan play operation (the track number will flash).
Page 294
4-2. Audio System ■ Repeat playback ● During music CD playback Press the repeat button (1) during playback to play the current track repeatedly. “TRACK RPT” is displayed ( is dis- played next to RPT at the bottom of the display area). Press the button again to cancel the repeat playback.
Page 295
4-2. Audio System ● During MP3/WMA/AAC CD playback Folder random Press the random button (2) during playback to play the tracks in the folder randomly. “FOLDER RDM” is displayed ( displayed next to RDM at the bottom of the display area). To cancel the random playback, press the button again after 3 seconds.
Page 296
4-2. Audio System ■ Switching the display The information displayed on the audio display changes as follows each time the text button (3) is pressed during playback. ● Music CD Information displayed on audio Button display Track number/Elapsed time Track number Track name Album name Artist name...
Page 297
Check the CD for damage, dirt, or smudges, and then properly reinsert it. If the message appears again, insert another known good CD. If the message continues to appear, take the unit to your Toyota dealer for service. ■ Operating the Compact Disc (CD) Player ●...
Page 298
Use a commercially-available, non- impedance (3.5) stereo mini plug cable. Contact your Toyota dealer for details. In addition, audio can be played from the vehicle audio device by con- necting a USB device or an iPod to the USB port.
4-2. Audio System Audio Set (Type B) The explanation of functions described in this manual may differ from the actual operation, and the shapes of screens and but- tons and the letters and characters displayed may also differ from the actual appearance. Additionally, depending on future software updates, the content may successively change without notice.
Page 300
4-2. Audio System ● Switches around commander knob The following operations can be done by pressing the switches around the com- mander knob. : Displays the home screen. : Displays the Enter- tainment screen. : Displays the Navigation screen (Only navigation- equipped vehicles).
Page 301
4-2. Audio System ■ Touch panel operation For safety reasons, touch panel operation is disabled while the vehicle is moving. ■ Commander switch operation ● For safety reasons, some operations are disabled while the vehicle is being driven. ● Long-press operation of the commander knob is also possible for some functions.
Page 302
4-2. Audio System ■ SLIDE Touch the setting item dis- playing a slider bar. Touch the slider with your fin- ger and move to the desired level. ■ SWIPE Touch the screen with your finger and move up or down. Items which were not dis- played can be displayed.
Page 303
4-2. Audio System ■ Return to previous screen Touch the ■ Displaying the home screen Touch the Home screen Icon Function Applications Information such as average fuel economy, mainte- nance, and warnings can be verified. Depending on the grade and specification, the screen display may differ.
Page 304
4-2. Audio System Volume/Display/Sound Controls Commander switch Audio control switch Volume switch Volume dial ■ Volume adjustment Turn the commander switch volume dial. The volume switch on the steering switch can also be pressed. ■ Display setting Select the icon on the home screen and display the Settings screen.
Page 305
4-2. Audio System ● Brightness adjustment Adjust the center display brightness using the slider. ● Contrast adjustment Adjust the center display contrast using the slider. ● Display setting reset All of the screen setting values can be reset to their initial set- tings.
Page 306
4-2. Audio System ● ALC (Automatic volume adjustment) The automatic level control (ALC) is a feature that automatically adjusts audio volume and sound quality according to the vehicle speed. The volume increases in accordance with the increase in vehicle speed, and decreases as vehicle speed decreases. Operating the Radio ■...
Page 307
4-2. Audio System Icon Function You can change the radio frequency manually. Rotate the commander knob, slide the screen, or touch the radio frequency. Press to change the radio fre- quency one step at a time. When is long-pressed, the radio frequency changes continually.
Page 308
4-2. Audio System ■ Favorites Radio Selected stations can be registered for convenient operation. Up to 50 stations can be registered. The Favorites list is common to AM, FM, and satellite radio. ● Registering to Favorites Long-press the icon to register the current radio station. The registration can also be performed using the following proce- dure.
Page 309
4-2. Audio System ■ Radio Broadcast Data System (RBDS) (if equipped) ● Radio text information display Radio text information sent from a broadcasting station is dis- played in the center display. ● Genre Seek Some FM stations transmit Genre codes (Program type like a Rock, News, and so on).
Page 310
4-2. Audio System ● Listening to HD Radio™ Technology icon turns on by selecting a radio station which is an broadcasting station, the analog broadcast is switched to an broadcast automatically after a few seconds and then received. If the broadcast is stopped and changed to an analog broadcast, press down to turn off...
Page 311
4-2. Audio System ● Multicast channel selection (FM) If multi-cast channels are available for an broadcast currently being received, the multi-cast channel list is displayed. Select the desired radio station. ● iTunes Tagging (for Apple devices with USB use only) By tagging a song currently being aired, the song can be easily purchased from the iTunes Store.
Page 312
4-2. Audio System ● If radio stations which are selected by scanning using the Genre Seek func- tion are broadcasting stations, they are changed from analog broadcasts to broadcdiffer. ● Both AM and FM can be used. ● Because iTunes Tagging only supports purchasing from the iTunes Store, direct downloading from the equipped vehicle audio is not possible.
Page 313
4-2. Audio System Operating the Satellite Radio (if equipped) ■ What is satellite radio? With over 130 channels, SiriusXM Satellite Radio brings you more of what you love. Get channels and channels of commercial-free music, plus sports, news, talk, entertainment and more. ●...
Page 314
4-2. Audio System ■ SiriusXM operation Select the icon on the home screen to display the Entertain- ment screen. When is selected, the following icons are indi- cated in the bottom part of the center display. Icon Function Displays the Entertainment menu. Use to switch to a different audio source.
Page 315
● Call 888-539-7474 to activate. For more information, visit www.siriusxm. com. Satellite radio is only available in regions providing satellite radio ser- vice (some areas of the United States and Canada). Contact Authorized your Toyota Dealer for details. YARIS_SEDAN_OM_OM99M18z_(U)
Page 316
4-2. Audio System Operating the Compact Disc (CD) Player (if equipped) CD eject button CD slot Type Playable data • Music data (CD-DA) Music/MP3/WMA/ AAC CD player • MP3/WMA/AAC file YARIS_SEDAN_OM_OM99M18z_(U)
Page 317
4-2. Audio System ■ Inserting the CD Insert the CD into the slot, label-side up. The auto-loading mecha- nism will set the CD and begin play. ■ Ejecting the CD Press the CD eject button ( ) to eject the CD. ■...
Page 318
4-2. Audio System Icon Function (Music CD) The beginning of each track on a CD is played to aid in searching for a desired track. When selected again, the operation is canceled and the song cur- rently being played continues. (MP3/WMA/AAC CD) The beginning of each track in a folder is played to aid in searching for a desired track.
Page 319
4-2. Audio System ● Example of use (When searching for a song from the top level of an MP3/ WMA/AAC CD) Select the icon and display the folder/file list at the top level. When the folder is selected, folders/file lists in the folder are displayed.
Page 320
4-2. Audio System Item Function Display Refer to Volume/Display/Sound Controls on P. 304. Speed Pre-Collision System Refer to Customizable Fea- Safety Blind Spot Monitoring Vol- tures on P. 598. Sound Refer to Volume/Display/Sound Controls on P. 304. Displays the currently set time is displayed.
Page 321
Music Database Update tance for Play Artist and System Play Album Gracenote can be down- loaded from Toyota Handsfree Website. Refer to Gracenote Data- base (Type B) on P. 343. Memory and settings are ini- tialized to the factory set- tings.
Page 322
4-2. Audio System Applications Depending on the grade and specification, the screen display may dif- fer. Select the icon on the home screen to display the Applications screen. The following information can be verified. Top screen Item Function Radio™ Traffic Fuel Economy Monitor Scheduled Refer to Maintenance...
4-2. Audio System Audio Control Switch Operation Adjusting the Volume To increase the volume, press up the volume switch ( To decrease the volume, press down the volume switch ( : If equipped YARIS_SEDAN_OM_OM99M18z_(U)
Page 324
4-2. Audio System Seek Switch ■ AM/FM radio Press the seek switch ( ). The radio switches to the next/previous stored station in the order that it was stored. Press and hold the seek switch ( ) to seek all usable stations at a higher or lower frequency whether programmed or not.
Page 325
4-2. Audio System Mute Switch (if equipped) Press the mute switch ( ) once to mute audio, press it again to resume audio output. If the ignition is switched off with the audio muted, the mute will be canceled. There- fore, when the engine is restarted, the audio is not muted.
A commercially-available, non-impedance (3.5) stereo mini plug cable is required. Contact your Toyota dealer for details. In addition, audio can be played from the vehicle audio device by connecting a USB device or an iPod to the USB port.
Page 327
● Type B only: The SD card slot is for the navigation system. For vehicles with the naviga- tion system, the SD card (Toyota genuine) with stored map data is inserted into the SD card slot and used. ● This mode may not be usable depending on the portable audio device to be connected.
Page 328
4-2. Audio System How to connect USB port/ Auxiliary jack Type A (Vehicles without CD Type A (Vehicles with CD player) player) USB port USB port Auxiliary jack Auxiliary jack Type B (Vehicles without CD Type B (Vehicles with CD player) player) USB port...
Page 329
4-2. Audio System ■ How to connect USB port/ Auxiliary jack ● Insert the plug into the auxiliary jack/ USB port securely. ● Insert or pull out the plug with the plug perpendicular to the auxiliary jack/ USB port hole. ●...
Page 330
4-2. Audio System How to use USB mode (Type A) Folder up button Repeat button Random button Folder down button Text button Media/Scan button Audio display Track up/Fast-forward button Play/Pause button Track down/Reverse button Type Playable data USB mode MP3/WMA/AAC file This unit does not support a USB 3.0 device.
Page 331
4-2. Audio System ■ Pause To stop playback, press the play/pause button (4). Press the button again to resume playback. ■ Fast-forward/Reverse Press and hold the fast-forward button ( ) to advance through a track at high speed. Press and hold the reverse button ( ) to reverse through a track at high speed.
Page 332
4-2. Audio System ■ Repeat playback ● Track repeat Press the repeat button (1) during playback to play the current track repeatedly. “TRACK RPT” is displayed ( is dis- played next to RPT at the bottom of the display area). To cancel the repeat playback, press the button again after 3 seconds.
Page 333
When the message “CHECK USB” is displayed, it indicates that there is some error in the USB device. Verify that the content recorded in the USB device has MP3/WMA/AAC files and re-con- nect correctly. If the message reappears, have the unit checked by your Toyota dealer. YARIS_SEDAN_OM_OM99M18z_(U)
Page 334
4-2. Audio System ■ How to use USB mode (Type A) ● Some devices such as smart phones may require a setting change to allow operation using a USB connection. ● When the USB device is not connected, the mode does not switch to USB mode.
Page 335
4-2. Audio System How to use iPod mode (Type A) Category up button Repeat button Random button List up button Text button List down button Audio display Media/Scan button Play/Pause button Track up/Fast-forward button Category down button Track down/Reverse button An iPod may not be compatible depending on the model or OS ver- sion.
Page 336
4-2. Audio System ■ Pause To stop playback, press the play/pause button (4). Press the button again to resume playback. ■ Fast-forward/Reverse Press and hold the fast-forward button ( ) to advance through a track at high speed. Press and hold the reverse button ( ) to reverse through a track at high speed.
Page 337
4-2. Audio System ■ Repeat playback Press the repeat button (1) during playback to play the current track repeatedly. “TRACK RPT” is displayed ( is displayed next to RPT at the bottom of the display area). Press the button again to cancel the repeat playback. ■...
Page 338
Verify that the content recorded in the iPod has playable files and connect correctly. If the message reap- pears, have the unit checked by your Toyota dealer. ■ How to use iPod mode (Type A) ●...
Page 339
4-2. Audio System Error Indications (Type A) If you see an error indication on the display, find the cause in the chart. If you cannot clear the error indication, take the vehicle to your Toyota dealer. Indication Cause Solution Verify that the content recorded in...
Page 340
4-2. Audio System How to use AUX mode (Type B) Select the icon on the home screen and display the Enter- tainment screen. Select to switch to the AUX mode. The following icons are dis- played in the lower part of the center display. Icon Function Displays the Entertainment menu.
Page 341
4-2. Audio System ■ Playback Select the icon on the home screen and display the Enter- tainment screen. Select to switch the USB mode. The following icons are displayed in the lower part of the center display. Icon Function Displays the Entertainment menu. Use to switch to a different audio source.
Page 342
4-2. Audio System ● Category list Select the icon and display the following category list. Select a desired category and item. Category Function Playlist Displays playlists on the device. Displays the artist name list. Artist All the tracks or tracks for each album of the selected artist can be played.
Page 343
The information stored in this device uses database information in the Gracenote music recognition ser- vice. NOTICE For information related to the most recent Gracenote database which can be used and how to install it, go to the Toyota Hands Free Website: http://www.scion.com/BeSpoke YARIS_SEDAN_OM_OM99M18z_(U)
Page 345
4-2. Audio System You agree that you will use Gracenote Data, the Gracenote Software, and Gracenote Servers for your own personal non-commercial use only. You agree not to assign, copy, transfer or transmit the Gracenote Software or any Gracenote Data to any third party. YOU AGREE NOT TO USE OR EXPLOIT GRACENOTE DATA, THE GRACENOTE SOFTWARE, GRACENOTE...
Page 346
4-2. Audio System You agree that your non-exclusive license to use the Gracenote Data, the Gracenote Software, and Gracenote Servers will terminate if you violate these restrictions. If your license terminates, you agree to cease any and all use of the Gracenote Data, the Gracenote Soft- ware, and Gracenote Servers.
Page 347
Select the tab and select Select . The list of the update package stored in the USB device and the version are displayed. Select the package to use the update. Select Gracenote can be downloaded from the Toyota Hands-free Website. YARIS_SEDAN_OM_OM99M18z_(U)
® 4-3. Bluetooth ® Bluetooth ® ■ Bluetooth Hands-Free outline ® When a Bluetooth device (mobile phone) is connected to the vehi- ® cle’s Bluetooth unit via radio wave transmission, a call can be made or received by pressing the talk button, pickup button, or hang-up button on the audio remote control switch, or by operating the center display.
Page 349
NOTICE ® Some Bluetooth mobile devices are not compatible with the vehicle. Con- sult your Toyota dealer, Scion Customer Experience (U.S.A. Only), Toyota Canada Customer Interaction Centre (Canada Only) or Web support center ® for information regarding Bluetooth mobile device compatibility: ●...
Page 350
® 4-3. Bluetooth ■ Microphone (hands-free) The microphone is used for speaking voice commands or when making a Hands-free call. ■ Talk button, Pick-Up button and Hang-Up button (hands-free) ® The basic functions of Bluetooth Hands-Free can be used for such things as making calls or hanging up using the talk, pick-up and hang-up buttons on the steering wheel.
Page 351
® 4-3. Bluetooth ® Bluetooth Preparation (Type A) ® ■ Bluetooth Hands-Free Preparation ● Pairing code setting The 4-digit pairing code setting for registration of your cell phone (pairing) can be set beforehand. The initial setting value is “0000”. Press the pick-up button or talk button with a short press. Say: [Beep] “Setup”...
Page 352
® 4-3. Bluetooth ● Device pairing ® To use Bluetooth Hands-Free, the device equipped with Blue- ® ® tooth has to be paired to the Bluetooth unit using the following procedure. A maximum of seven devices including hands-free mobile ® phones and Bluetooth audio devices can be paired to one vehi- cle.
Page 353
® 4-3. Bluetooth Select “Toyota” from the device list searched by the device. Input the 4-digit pairing code to the device. Prompt: “Please say the name of the device after the beep.” Say: [Beep] “XXXX - - -” (Say a “device tag”, an arbitrary name for the device.) Example: “Stan’s device.”...
Page 354
® 4-3. Bluetooth ● Registered device read-out ® Bluetooth Hands-Free can read-out the devices registered to its system. Do this function only when parked. It is too distracting to attempt while driving and you may make too many errors to be effective. Press the pick-up button or talk button with a short press.
Page 355
® 4-3. Bluetooth ● Device selection ® If several devices have been paired, the Bluetooth unit links the device last paired. If you would like to link a different paired device, it is necessary to change the link. The order of device pri- ority after the link has been changed is maintained even when the ignition is switched off.
Page 356
® 4-3. Bluetooth Say: [Beep] “Yes” or “No” If “Yes”, go to Step 10. If “No”, the procedure returns to Step 5. Prompt: “XXXXX... (Ex. Device B) selected.” ● Deleting a device Registered devices (Mobile phone) can be deleted individually or collectively.
Page 357
® 4-3. Bluetooth ● Registered device editing Press the pick-up button or talk button with a short press. Say: [Beep] “Setup” Prompt: “Select one of the following: Pairing options, confirma- tion prompts, language, passcode, select phone or select music player.” Say: [Beep] “Pairing options”...
Page 358
® 4-3. Bluetooth ® ■ Bluetooth Audio Preparation ● Bluetooth ® audio device set-up ® Bluetooth audio pairing, changes, deletions, and display of paired device information can be performed. The mode changes as fol- lows each time the menu button ( ) is pressed.
Page 359
® 4-3. Bluetooth Display Mode Function ® Bluetooth audio device PAIR DEVICE Pairing mode pairing Changing link to Blue- LINK CHANGE Link change mode ® tooth audio device Deleting link to Blue- PAIR DELETE Pairing deletion mode ® tooth audio device Device information dis- Displaying vehicle’s Blue- DEVICE INFO...
Page 360
® 4-3. Bluetooth ® Input the PIN code of your Bluetooth audio device by press- ing channel preset buttons 1 to 4 while “PIN 0000” is dis- played. Press channel preset button 1 to input the first digit, 2 for the second, 3 for the third, and 4 for the forth.
Page 361
® 4-3. Bluetooth ® ● Pairing a Bluetooth audio device which does not have a four- digit PIN code Using the audio control dial, select the pairing mode “PAIR ® DEVICE” in the “BT SETUP” mode. (Refer to “Bluetooth audio set up” for details.) Press the audio control dial to determine the mode.
Page 362
® 4-3. Bluetooth ● Device selection ® If several devices have been paired, the Bluetooth unit links the device last paired. If you would like to link a different paired device, it is necessary to change the link. The order of device pri- ority after the link has been changed is maintained even when the ignition is switched off.
Page 363
® 4-3. Bluetooth If the link to the desired device is successful, the sym- bol is displayed again, together with “LINK CHANGED”. “LINK CHANGED” is displayed for three seconds, then it returns to the normal display. ● How to confirm the device currently linked Switch to the link-change mode.
Page 364
® 4-3. Bluetooth Rotate the audio control dial clockwise and switch the display to “SURE ? YES”. The display changes as follows depending on whether the audio con- trol dial is rotated clockwise or counterclockwise. • Clockwise: “SURE ? YES” displayed •...
Page 365
® 4-3. Bluetooth ® ● Bluetooth audio device information display Using the audio control dial, select the pair device information display mode “DEVICE INFO” in the “BT SETUP” mode. ® (Refer to “Bluetooth audio device set-up” for details.) Press the audio control dial to determine the mode. ®...
Page 366
® 4-3. Bluetooth ● If the pairing failed, “Err” flashes for three seconds. ● Pairing cannot be performed while the vehicle is moving. If you attempt to perform pairing while the vehicle is moving, “PAIR DISABLE” is displayed. ® ● If seven Bluetooth audio devices have already been paired to the vehicle, pairing cannot be performed and “MEMORY FULL”...
Page 367
® 4-3. Bluetooth Available Language (Type A) The available languages are English, Spanish, and Canadian French. If the language setting is changed, all of the voice guidance and voice input commands are done in the selected language. Method 1 Press the pick-up button or talk button with a short press.
Page 368
® 4-3. Bluetooth ■ Available Language (Type A) ● If the language setting is changed, device registration is maintained. ● Phonebook records are not cleared, but each language has a separate phonebook. Therefore, entries created in one language will need to be re- entered in the phonebook of the new language.
Page 369
® 4-3. Bluetooth ■ Tutorial ® The tutorial explains how to use Bluetooth Hands-Free. To activate the tutorial, do the following: Press the pick-up button or talk button with a short press. Say: [Beep] “Tutorial” Follow the prompts to receive the appropriate voice guidance instructions.
Page 370
® 4-3. Bluetooth ● Make sure the vents are not directing air up towards the micro- phone. ■ Voice Recognition (Type A) ® ● The Bluetooth Hands-Free system is operable several seconds after the ignition is switched to ACC or ON (requires less than 15 seconds). ●...
Page 371
® 4-3. Bluetooth ® ■ Using Bluetooth Hands-Free with a passcode Press the pick-up button or talk button with a short press. Prompt: “Hands-Free system is locked. State the passcode to continue.” Say: [Beep] “XXXX” (Say the set passcode “PCode”.) If the correct passcode is input, voice guidance “XXXXXX...
Page 372
® 4-3. Bluetooth Prompt: “Select one of the following: Pairing options, confirma- tion prompts, language, passcode, select phone or select music player.” Say: [Beep] “Confirmation prompts” Prompt: “Confirmation prompts are on/off. Would you like to turn confirmation prompts off/on?” Say: [Beep] “Yes” Prompt: “Confirmation prompts are off/on.”...
Page 373
® 4-3. Bluetooth Say: [Beep] “0123456789” (Say the voice input command for voice recognition learning (1 to 8) according to the voice guid- ance.) Prompt: “Speaker enrollment is complete.” ■ Voice recognition re-learning If voice recognition learning has already been done. Press the pick-up button or talk button with a short press.
Page 374
® 4-3. Bluetooth ● Voice input command list for voice recognition learning When reading out, the following points must be observed: • Read out the numbers one at a time correctly and naturally. (For example, “1234” must be read out “one, two, three, four” not “twelve, thirty four”.) •...
Page 375
Turn the Bluetooth setting on. Select to display the message and switch to the device operation. ® Using your device, perform a search for the Bluetooth device (Peripheral device). Select “Toyota” from the device list searched by the device. YARIS_SEDAN_OM_OM99M18z_(U)
Page 376
If pairing is successful, the functions of the device connected ® to Bluetooth are displayed. (Devices compatible with Toyota/Scion Email/SMS function) SMS (Short Message Service) messages, and E-mail for the device are downloaded automatically. A download permission operation for your device may be required depending on the device.
Page 377
® 4-3. Bluetooth ■ Device selection ® If several devices have been paired, the Bluetooth unit links the device last paired. If you would like to link a different paired device, it is necessary to change the link. The order of device priority after the link has been changed is maintained even when the ignition is switched off.
Page 378
® 4-3. Bluetooth ■ Deleting a device ● Selecting and deleting devices Select the icon on the home screen and display the Settings screen. Select the tab. Select ® Turn the Bluetooth setting on. Select the device name which you would like to delete. Select Select ●...
Page 379
® 4-3. Bluetooth ■ ® Bluetooth Preparation (Type B) ® The Bluetooth system may not operate for 1 or 2 minutes after the ignition is switched to ACC or ON. However, this does not indicate a problem. If the ® Bluetooth system does not connect automatically after 1 or 2 minutes have ®...
Page 380
® 4-3. Bluetooth Voice Recognition (Type B) In this section, the basic operation of the voice recognition is explained. ■ Activating Voice Recognition Press the talk button. ■ Ending Voice Recognition Use one of the following methods: ● Press the hang-up button. ●...
Page 381
® 4-3. Bluetooth ■ To prevent a deterioration in the voice recognition rate and voice quality, the following points should be observed: ● The voice recognition cannot be performed while voice guidance or the beep sound is operating. Wait until the voice guidance or the beep sound is finished before saying your commands.
Page 382
® 4-3. Bluetooth Audio Operation Using Voice Recognition (Type B) ■ Main audio operation The below commands are examples of the available commands. When the talk button is pressed and the following command is spo- ken out, the audio can be operated. The commands in the () can be omitted.
Page 383
® 4-3. Bluetooth ■ Main audio operation ● Some commands cannot be used depending on devices and use condi- tions. ® ● If the Bluetooth device, USB, or AUX is not connected, the related com- mands cannot be used. YARIS_SEDAN_OM_OM99M18z_(U)
® 4-3. Bluetooth ® Bluetooth Hands-Free (Type A) Making a Call ● Phonebook Usage Telephone calls can be made by saying the name of a person ® (voice tag) whose phone number has been registered in Bluetooth Hands-Free in advance. Refer to Phonebook registration. Press the pick-up button or talk button with a short press.
Page 385
® 4-3. Bluetooth Prompt: “Adding XXXXX... (Ex. “Mary’s phone”) (Registered voice tag). Is this correct?” Say: [Beep] “Yes” Prompt: “Home, Work, Mobile, or Other?” Say: [Beep] “Mobile” (Say “Home”, “Work”, “Mobile”, or “Other”, for the desired location to be registered.) Prompt: “Mobile (Location to be registered).
Page 386
® 4-3. Bluetooth Import contact: Phonebook data from your device (Mobile phone) can be sent and ® registered to your Bluetooth Hands-Free phonebook using Blue- ® tooth Press the pick-up button or talk button with a short press. Say: [Beep] “Phonebook” Prompt: “Select one of the following: New entry, edit, list names, delete, erase all or import contact.”...
Page 387
® 4-3. Bluetooth Press the pick-up button or talk button with a short press. Say: [Beep] “Phonebook” Prompt: “Select one of the following: New entry, edit, list names, delete, erase all or import contact.” Say: [Beep] “Edit” Prompt: “Please say the name of the entry you would like to edit or say, “List names”.”...
Page 388
® 4-3. Bluetooth ● Phonebook data deletion Erasing individual phonebook data ® Individual data registered to the Bluetooth Hands-Free phonebook can be cleared. Do this function only when parked. It is too distracting to attempt while driv- ing and you may make too many errors to be effective. Press the pick-up button or talk button with a short press.
Page 389
® 4-3. Bluetooth Prompt: “Please wait, erasing the Hands Free system phone- book.” Prompt: “Hands-Free system phonebook erased.” ● Read-out of names registered to the Bluetooth ® Hands-Free phonebook ® Bluetooth Hands-Free can read out the list of names registered to its phonebook.
Page 390
® 4-3. Bluetooth ■ Redial Function Redialing the number of the person previously dialed using the phone is possible. Press the pick-up button or talk button with a short press. Say: [Beep] “Redial” Prompt: “Dialing” ■ Telephone Number Input Press the pick-up button or talk button with a short press. Say: [Beep] “Dial”...
Page 391
® 4-3. Bluetooth ■ Emergency calls A call can be made to the emergency phone number (911 U.S.A./ Canada) using the voice input command. Press the pick-up button or talk button with a short press. Say: [Beep] “Emergency” Prompt: “Dialing “911”, is this correct?” Say: [Beep] “Yes”...
Page 392
® 4-3. Bluetooth Transferring a Call from Hands- Free to a Device (Mobile Phone) Communication between the hands-free unit and a device (Mobile phone) is canceled, and the line can be switched to a standard call using a device (Mobile phone). Press the talk button with a short press.
Page 393
® 4-3. Bluetooth ■ Switching calls Switching back to the previous call can also be done. Method 1: Press the pick-up button. Prompt: “Swapping calls.” Method 2: Press the talk button with a short press. Say: [Beep] “Swap calls” Prompt: “Swapping calls.” ■...
Page 394
® 4-3. Bluetooth ■ Making calls using the phonebook Press the talk button with a short press. Say: [Beep] “Call” Prompt: “Name please.” Say: [Beep] “XXXXX... (Ex. “John’s phone”)” (Say a voice tag registered in the phonebook.) Prompt: “Calling XXXXX... (Ex. “John’s phone”) XXXX (Ex. “at home”).
® 4-3. Bluetooth ® Bluetooth Hands-Free (Type B) Making a Call ■ Phonebook Usage Telephone calls can be made by saying the contact name in the downloaded phonebook or the name of a person whose phone ® number has been registered in the Bluetooth Hands-Free.
Page 396
® 4-3. Bluetooth Select Select to switch to the device operation. is selected, select Download will be started from the mobile phone. ■ Favorites Contacts A maximum of 50 contacts can be registered. It will take less time to make a call after registering the telephone number. In addition, you do not have to look for the person you want to call in the phone- book.
Page 397
® 4-3. Bluetooth ● Deleting from your favorites Select the icon on the home screen and display the Communication screen. Select to display the favorites list. Select Select Select the contact information which you would like to delete. Select ● Changing the display order of your favorites list Select the icon on the home screen and display the Communication screen.
Page 398
“Emergency Assistance Call” setting must be on. Refer to Communication Settings on P. 406. NOTICE Though the system can be set to not call 911, doing so will defeat the pur- pose of the system. Toyota recommends that the Mobile 911 system remain activated. YARIS_SEDAN_OM_OM99M18z_(U)
Page 399
® 4-3. Bluetooth ■ Making a Call ● If “Import All Contacts” is performed after saving the phonebook to the ® Bluetooth unit, the phonebook will be overwritten. ● A maximum of 1000 contacts can be registered to the phonebook. ●...
Page 400
® 4-3. Bluetooth Receiving an Incoming Call When an incoming call is received, the incoming call notification screen is displayed. The “Incoming Call Notifications” setting must be Refer to Communication Settings on P. 406. To accept the call, press the pick-up button on the audio control switch or select on the screen.
Page 401
® 4-3. Bluetooth Icon Function The call on hold is made to make a 3-way call. The device may be unusable depending on the con- tractual content. Switches the call on hold. DTMF (Dual Tone Multi-Frequency Signal) Trans- mission This function is used when transmitting DTMF via the dial pad.
Page 402
® 4-3. Bluetooth Call Interrupt A call can be interrupted to receive an incoming call from a third party. When is selected or the pick- up button on the steering wheel is pressed, the current call is held and the system switches to the new incoming call.
Page 403
® 4-3. Bluetooth Select to display the Inbox. Select Download will be started from the mobile phone. ■ Receiving messages Method 1: When a device receives a message, a message received notifica- tion is displayed. The “Email Notifications” (E-mail) or “Text Notifica- tions”...
Page 404
® 4-3. Bluetooth Icon Function (Only E-mail) Replies to all members including CC. Select the sentence on the displayed reply screen and select the sentence for sending from the preset message. Select Makes a call to a person who sent a message. For E-mail, this function may not work depending on the device.
Page 405
® 4-3. Bluetooth ● Changing account for displaying (E-mail only) Select Select the account which you would like to display. Only the messages for the selected account are displayed in the inbox. ● Editing preset messages Select the icon on the home screen and display the Communication screen.
Page 406
® 4-3. Bluetooth Communication Settings Select the icon on the home screen and display the Communi- cation screen. Select to change the setting. Item Setting Function ® Go to Bluetooth setting menu. ® ® Bluetooth Refer to Bluetooth Preparation (Type B) on P.
Page 407
® 4-3. Bluetooth Item Setting Function Edits the preset message. Edit Preset Refer to Receiving and Replying to Mes- Messages sages (available only with E-mail/SMS com- patible phones) on P. 402. Emergency Assistance On/Off Mobile Utilizes the Mobile 911 function. Call Restore Factory set-...
® 4-3. Bluetooth ® Bluetooth Audio (Type A) ® ■ Applicable Bluetooth specification (Recommended) Ver. 2.0 ■ Response profile ● A2DP (Advanced Audio Distribution Profile) Ver. 1.0/1.2 ● AVRCP (Audio/Video Remote Control Profile) Ver. 1.0/1.3 ® A2DP is a profile which transmits only audio to the Bluetooth unit.
Page 409
® 4-3. Bluetooth ® How to Use the Bluetooth Audio System ® ■ Switching to Bluetooth audio mode ® To listen to music or voice audio recorded to a Bluetooth audio ® device, switch to the Bluetooth audio mode to operate the audio ®...
Page 410
® 4-3. Bluetooth ■ Selecting a file (track) ● Selects the next file (track) Short-press the track up button ( ● Selects the beginning of the current file (track) Short-press the track down button ( ■ Fast-forward/Reverse (AVRCP Ver. 1.3) ●...
Page 411
® 4-3. Bluetooth ® ■ How to Use the Bluetooth Audio System ● ® Some Bluetooth audio devices need a certain amount of time before the “ ” symbol is displayed. ® ● If the Bluetooth audio device does not begin playback, press the Play/ Pause button (4).
® 4-3. Bluetooth ® Bluetooth Audio (Type B) ® ■ Applicable Bluetooth specification (Recommended) Ver. 1.1/1.2/2.0 + EDR/2.1 + EDR/3.0 (conformity) ● Response profile • A2DP (Advanced Audio Distribution Profile) Ver. 1.0/1.2 • AVRCP (Audio/Video Remote Control Profile) Ver. 1.0/1.3/1.4 ®...
Page 413
® 4-3. Bluetooth ● ® The battery consumption of Bluetooth audio devices increases while Blue- ® tooth is connected. ● If a general mobile phone device is USB connected during music playback ® ® over the Bluetooth connection, the Bluetooth connection is disconnected.
Page 414
® 4-3. Bluetooth Icon Function Displays the Entertainment menu. Use to switch to a different audio source. (AVRCP Ver. 1.4 only) Displays the top level folder/file list. Select the folder which you want to select. The files in the selected folder are displayed. Select the file you want to play.
Page 415
® 4-3. Bluetooth ● Example of use (When searching for a song from the top level of a device) Select the icon to display the folder/file list at the top level. When the folder is selected, folders/file lists in the folder are displayed.
Page 416
® 4-3. Bluetooth ® Bluetooth Audio Device Information Display ® If a Bluetooth audio device is connected, the following information is displayed in the center display. AVRCP Ver. AVRCP Ver. AVRCP Ver. lower than 1.3 1.4 or higher Device name Remaining battery charge of device Song name...
Page 417
® 4-3. Bluetooth ■ Playback Select the icon on the home screen and display the Enter- tainment screen. When is selected, the following icons are indicated in the bottom part of the center display. Icon Function Displays the Entertainment menu. Use to switch to a different audio source.
Page 418
® 4-3. Bluetooth ■ Selection from station list Selection can be made from a programmed radio station list. Select the icon. Select the desired radio station. When is selected, songs randomly selected from the radio sta- tion list are played. ●...
Page 419
® 4-3. Bluetooth How to Use Aha™ Aha is an application which can be used to enjoy various Internet con- tent such as Internet radio and podcasts. Stay connected to your friends activities by getting updates from Facebook and Twitter. Using the location-based service, nearby ser- vices and destinations can be searched or real- time local information can be obtained.
Page 420
® 4-3. Bluetooth Icon Function Dislike Evaluates the current content as “Dislike”. Reverses for 15 seconds. Map (vehicles with navigation system) Displays the destination searched by the location based services on the navigation system. Call A call can be made to the telephone number of a shop searched using the Location Based Services.
Page 421
® 4-3. Bluetooth Switch the tab and select the station category. Function Displays the preset station list set on the device. Presets Select the preset station name to play the station content. Select the desired station. Guidance is provided to the searched destination Nearby near the vehicle’s position.
Page 422
® 4-3. Bluetooth ■ Shout Some social stations, such as Facebook or Caraoke, support the ability to record and share voice messages using the “Shout” func- tion. Select the icon and start the countdown (3, 2, 1, 0). Recording starts when the countdown reaches zero. Records voice.
Page 423
® 4-3. Bluetooth How to Use Stitcher™ Radio ■ What is Stitcher™ Radio? Stitcher™ radio is an application which can be used to listen to Internet radio or stream podcasts. Recommended content is automatically selected by registering content which you put into your favorites, or by pressing the Like or Dislike button.
Page 424
® 4-3. Bluetooth Icon Function Displays sound settings to adjust audio quality level. Refer to Volume/Display/Sound Controls on P. 304. ● Station list Select the icon and display the station list. Favorites station name: Select to display the pro- gram registered to your favorites.
® 4-3. Bluetooth Troubleshooting ■ Toyota Canada Customer Interaction Centre ® If you have any problems with Bluetooth , contact our toll-free cus- tomer service center. ● U.S.A. Phone: 1-866-70-SCION or 1-866-707-2466 (Toll-free) Web: http://www.scion.com/BeSpoke ● Canada Phone: 1-888-TOYOTA-8 or 1-888-869-6828 (Toll-free) Web: www.toyota.ca...
Page 426
● If you pair your phone which has already been paired to your vehicle more than once in the past, you need to delete “Toyota” on your mobile device. ® Then, execute the Bluetooth search on your mobile device once again, and pair to a newly detected “Toyota”.
Page 427
A poor connection or malfunction with There is a malfunction Poor voice recognition microphone may have in the microphone. occurred. Consult your Toyota dealer. There is a problem with If there is any malfunc- connection tion after checking the Phone-related voice between...
Page 428
® 4-3. Bluetooth Symptom Cause Solution method When operating Song names cannot be audio, a song name is recognized by voice. not recognized Guidance You want to skip guid- skipped quickly ance pressing and releasing the Talk button. ■ Regarding problems with calls Symptom Cause Solution method...
Page 429
® 4-3. Bluetooth Symptom Cause Solution method It takes a long time to complete the function A maximum of 60 sec- for changing the lan- onds is required. guage YARIS_SEDAN_OM_OM99M18z_(U)
4-4. Interior Equipment Sunvisors When you need a sunvisor, lower Sunvisor it for use in front or swing it to the side. Vanity Mirrors To use the vanity mirror, lower the sunvisor. YARIS_SEDAN_OM_OM99M18z_(U)
4-4. Interior Equipment Interior Lights ■ Overhead Lights Switch Position Overhead Lights Light off • Light is on when any door is open DOOR • Light is on or off when the illuminated entry sys- tem is on Light on ...
Page 432
4-4. Interior Equipment ■ Trunk Light The trunk light is on when the lid is open and off when it’s closed. ■ Map Lights (if equipped) The map lights will not turn off even if the lens is pressed in the following cases: ●...
Page 433
4-4. Interior Equipment ■ Illuminated Entry System ● Battery saver If any door is left open with the overhead light switch in the DOOR position, or the trunk lid is left open, the overhead light or luggage compartment light/ trunk light turns off after about 30 minutes to prevent battery depletion. ●...
• Do not use accessories that require more than 120 W (DC 12 V, 10 A). • Do not use accessories that are not genuine Toyota accessories or the equivalent. • Close the cover when the accessory socket is not in use to prevent for- eign objects and liquids from getting into the accessory socket.
4-4. Interior Equipment Cup Holder WARNING ■ Never use a cup holder to hold hot liquids while the vehicle is moving Using a cup holder to hold hot liquids while the vehicle is moving is danger- ous. If the contents spill, you could be scalded. ■...
4-4. Interior Equipment Bottle Holder Bottle holders are on the inside of the front doors. Bottle holder NOTICE Do not use the bottle holders for containers without caps. The contents may spill when the door is opened or closed. YARIS_SEDAN_OM_OM99M18z_(U)
4-4. Interior Equipment Storage Compartments WARNING ■ Keep storage boxes closed when driving Driving with the storage boxes open is dangerous. To reduce the possibility of injury in an accident or a sudden stop, keep the storage boxes closed when driving. ■...
Page 438
4-4. Interior Equipment Glove Compartment To open the glove compartment, pull the latch toward you. To close the glove compartment, firmly press in the center of the glove compartment lid. Center Console Tray A cup or small items can be placed on the center console tray using the center console divider.
Page 439
4-4. Interior Equipment Cargo Sub-Compartment Lift the trunk mat. Rear Coat Hooks Always hang clothes on the coat hooks and the assist grips without hangers. WARNING ■ Never hang heavy or sharp objects on the assist grips and coat hooks Hanging heavy or sharp-ended objects such as a coat hanger from the assist grips or coat hooks is dangerous as they can fly off and hit an occu- pant in the cabin if a curtain air bag was to deploy, which could result in seri-...
This could lead to vehicle damage or an accident and injuries. For expert advice and quality service, consult your Toyota dealer. To continue warranty eligibility and to protect your investment, it is your responsibility to properly maintain your vehicle according to fac- tory recommended schedules outlined in this manual.
Page 443
5-1. Essential Information If you elect to perform maintenance yourself or have your vehicle serviced at a location other than your Toyota dealer, Toyota requires that all fluids, parts and materials must meet Toyota standards for durability and performance as described in this manual.
“Oil Change” with a flexible setting is available. Consult your Autho- rized your Toyota Dealer when you want to change the setting Once the system turns on, the wrench indicator light in the instrument cluster will be illuminated when remaining oil life becomes less than 300 mile (500 km), or remaining days are less than 15 (whichever comes first).
Page 445
5-2. Scheduled Maintenance Item Explanation Setting Notification can be switched on/off. Time (months) Displays the time or distance until main- tenance is due. Select this item to set the maintenance period. “Scheduled Due!” is displayed in red and the wrench indicator light in the Distance instrument cluster will be illuminated (mile or km)
Page 446
The vehicle lets you know when an oil change is due by illumi- nating the wrench indicator light in the instrument cluster. Toyota Genuine ® Engine Oil 0W-20 and Castrol 0W-20 oil are required to achieve optimum perfor- mance.
Page 447
5-2. Scheduled Maintenance Vehicle Engine Control Unit Reset Procedure After replacing the engine oil, have a repair shop such as your Toyota dealer perform the initialization (engine oil data resetting) of the recorded value. If the value recorded by the computer is not initialized, the wrench indicator light may not turn off or it may turn on earlier than normal.
The owner or a qualified service technician should make these vehicle inspections at the indicated intervals to ensure safe and dependable operation. Bring any problem to the attention of your Toyota dealer or qualified service technician as soon as possible. ■...
Page 449
5-3. Owner Maintenance WARNING ■ Do not perform maintenance work if you lack sufficient knowledge and experience or the proper tools and equipment to do the work. Have maintenance work done by a qualified technician Performing maintenance work on a vehicle is dangerous if not done prop- erly.
5-3. Owner Maintenance Hood Opening the Hood With the vehicle parked, pull the release handle to unlock the hood. Release handle Insert your hand into the hood opening, slide the latch lever to the right, and lift up the hood. Lever Grasp the support rod in the padded area and secure it in...
Page 451
5-3. Owner Maintenance Closing the Hood Check under the hood area to make certain all filler caps are in place and all loose items (e.g. tools, oil containers, etc.) have been removed. Lift the hood, grasp the padded Clip area on the support rod, and secure the support rod in the clip.
Recommended Oil ■ U.S.A., Canada, and Puerto Rico Use SAE 0W-20 engine oil. Toyota Genuine Oil is used in your Toyota vehicle. Toyota Genuine Engine Oil 0W-20 is required to achieve optimum fuel economy. maintenance service, Toyota...
Page 454
5-3. Owner Maintenance Only use SAE 0W-20 oil “Certi- fied For Gasoline Engines” by the American Petroleum Insti- tute (API). Oil with this trademark symbol conforms to the current engine and emission system protection standards and fuel economy requirements of the Interna- tional Lubricant Standardiza- tion and Approval Committee (ILSAC), comprised of U.S.
F. Securely tighten the coolant reservoir tank cap after adding coolant. If the coolant reservoir is empty or new coolant is required frequently, consult your Toyota dealer. Changing the coolant should be done by your Toyota dealer. YARIS_SEDAN_OM_OM99M18z_(U)
Page 456
5-3. Owner Maintenance WARNING ■ Do not use a match or live flame in the engine compartment. DO NOT ADD COOLANT WHEN THE ENGINE IS HOT A hot engine is dangerous. If the engine has been running, parts of the engine compartment can become very hot.
Page 457
5-3. Owner Maintenance NOTICE ● Radiator coolant will damage paint. Rinse it off quickly if spilled. ● Use only soft (demineralized) water in the coolant mixture. Water that con- tains minerals will cut down on the coolant’s effectiveness. ● Do not add only water. Always add a proper coolant mixture. ●...
If it is excessively low, have the brake/clutch system inspected by your Toyota dealer. WARNING ■ If the brake/clutch fluid level is low, have the brakes inspected A low brake/clutch fluid level is dangerous.
5-3. Owner Maintenance Window Washer Fluid Inspecting Washer Fluid Level Inspect fluid level in the washer fluid reservoir; add fluid if neces- sary. Use plain water if washer fluid is unavailable. But use only washer fluid in cold weather to prevent it from freezing. ●...
5-3. Owner Maintenance Body Lubrication All moving points of the body, such as door and hood hinges and locks, should be lubricated each time the engine oil is changed. Use a nonfreezing lubricant on locks during cold weather. Make sure the hood’s secondary latch keeps the hood from opening when the primary latch is released.
5-3. Owner Maintenance Wiper Blades Contamination of either the windshield or the blades with for- eign matter can reduce wiper effectiveness. Common sources are insects, tree sap, and hot wax treatments used by some commercial car washes. If the blades are not wiping properly, clean the window and blades with a good cleaner or mild detergent;...
Page 462
5-3. Owner Maintenance Replacing Windshield Wiper Blades When the wipers no longer clean well, the blades are probably worn or cracked. Replace them. Raise the wiper arm and turn the blade assembly to expose the plastic locking clip. Compress the clip and slide the assembly downward;...
Page 463
5-3. Owner Maintenance ● When raising both windshield wiper arms, raise the driver’s side wiper arm first. When lowering the wiper arms, slowly lower the wiper arm from the passenger’s side first while supporting it with your hand. Forcefully lowering the wiper arms could damage the wiper arm and blade, and may scratch or crack the windshield.
● If the vehicle will not be used for an extended time, disconnect the battery cables and charge the battery every six weeks. Battery Replacement Contact your Toyota dealer for a battery replacement purchase. YARIS_SEDAN_OM_OM99M18z_(U)
Page 465
5-3. Owner Maintenance WARNING ■ Wash hands after handling the battery and related accessories Battery posts, terminals and related accessories contain lead and lead com- pounds, chemicals known to the State of California to cause cancer and reproductive harm. ■ Read the following precautions carefully before using the bat- tery or inspecting to ensure safe and correct handling ■...
Page 466
5-3. Owner Maintenance WARNING ■ Keep all flames, including cigarettes, and sparks away from open battery cells Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced during normal battery operation, could ignite and cause the bat- tery to explode. An exploding battery can cause serious burns and injuries. YARIS_SEDAN_OM_OM99M18z_(U)
Key does not flash when the buttons are pressed. ● The system’s operational range is reduced. Replacing the battery at your Toyota dealer is recommended to pre- vent damage to the key. If replacing the battery by yourself, follow the instruction below.
Page 468
5-3. Owner Maintenance Insert the tape-wrapped flat- Cover head screwdriver into the gap and slide it in the direc- tion of the arrow. Twist the flathead screw- driver in the direction of the Cover arrow and remove the cover. Remove the battery cap, then remove the battery.
Page 469
5-3. Owner Maintenance Close the cover. Reinsert the auxiliary key. NOTICE ● Make sure the battery is installed correctly. Battery leakage could occur if it is not installed correctly. ● When replacing the battery, be careful not to touch any of the internal cir- cuitry and electrical terminals, bend the electrical terminals, or get dirt in the smart Key as the smart Key could be damaged.
5-3. Owner Maintenance Tires For reasons of proper performance, safety, and better fuel econ- omy, always maintain recommended tire inflation pressures and stay within the recommended load limits and weight distribu- tion. WARNING ■ Using Different Tire Types Driving your vehicle with different types of tires is dangerous. It could cause poor handling and poor braking;...
Page 471
Refer to Tires on (P. 596). ■ Use only a Toyota-genuine tire valve cap Use of a non-genuine part is dangerous as the correct tire air pressure cannot be maintained if the tire valve becomes damaged. If the vehicle is driven under this condition, the tire air pressure will decrease which could result in a serious accident.
Page 472
Rotate tires periodically Irregular tire wear is dangerous. To equalize tire wear and extend tire life, Toyota recommends that tire rotation is carried out at the same interval as tire inspection. For scheduled maintenance information, please refer to the “Owner’s Manual Supplement/Scheduled Maintenance Guide”.
Page 473
Replace all four tires at the same time Replacing just one tire is dangerous. It could cause poor handling and poor braking resulting in loss of vehicle control. Toyota strongly recom- mends that you replace all four tires at the same time. If you replace only two tires, the new tires should be installed on the rear of the vehi- cle.
Page 474
5-3. Owner Maintenance NOTICE ● Do not use your temporary spare tire rim with a snow tire or a conven- tional tire. Neither will properly fit and could damage both tire and rim. ● The temporary spare tire has a tread life of less than 3,000 miles (5,000 km).
5-3. Owner Maintenance Light Bulbs ■ Front Headlights (Low/High beam)/ Daytime running lights Front side-marker lights Overhead lights/Map lights Front turn signal lights/Park- ing lights Fog lights (if equipped) ■ Rear Trunk light License plate lights Reverse lights Rear turn signal lights Brake lights/Taillights/Rear side-marker lights...
Page 476
5-3. Owner Maintenance Replacing Exterior Light Bulbs ■ Headlights/Daytime running lights Make sure the ignition is switched off, and the headlight switch is off. Lift the hood. Disconnect connector from the bulb. Detach the sealing cover from the bulb. Retaining spring Sealing cover Unhook the bulb retaining spring.
Page 477
5-3. Owner Maintenance ■ Front turn signal lights/Parking lights, Front side-marker lights Make sure the ignition is switched off, and the headlight switch is off. Lift the hood. Front turn signal lights/Parking lights Remove fuse block cover. Turn the socket and bulb assembly counterclockwise and remove it.
Page 478
5-3. Owner Maintenance ■ Fog lights (if equipped) Make sure the ignition is switched off, and the fog light switch is off. Turn the screws counter- clockwise and remove them. Pull the center of each retain- ers and remove them, and then partially peel back the front under cover.
Page 479
5-3. Owner Maintenance Turn the socket and bulb assembly to remove it. Care- fully remove the bulb from its socket in the reflector by gently pulling it straight back- ward out of the socket. Install the new bulb in the reverse order of the removal proce- dure.
Page 480
5-3. Owner Maintenance Install the new bulb in the reverse order of the removal proce- dure. Verify that the cover is securely installed. Insert the cover tabs and install the cover. ■ Reverse lights Make sure the ignition is switched off, and the headlight switch is off.
Page 481
The LED bulb cannot be replaced as a single unit because it is an integrated unit. The LED bulb has to be replaced with the unit. We recommend your Toyota dealer when the replacement is necessary. ■ Replacing Exterior Light Bulbs ●...
Page 482
5-3. Owner Maintenance Replacing Interior Light Bulbs ■ Overhead lights/Map lights (if equipped) Wrap a small flathead screwdriver with a soft cloth to prevent damage to the lens, and then remove the lens by carefully prying on the edge of the lens with the flathead screwdriver. Disconnect the bulb by pulling it out.
Page 483
5-3. Owner Maintenance ■ Trunk light Press both sides of the lens cap to remove it. Disconnect the bulb by pull- ing it out. Install the new bulb in the reverse order of the removal proce- dure. WARNING ■ Never touch the glass portion of a halogen bulb with your bare hands and always wear eye protection when handling or working around the bulbs When a halogen bulb breaks, it is dangerous.
If a fuse has blown, the inside ele- ment will be melted. If the same fuse blows again, avoid using that system and con- sult your Toyota dealer as soon as possible. Fuse Replacement ■ Replacing the fuses on the vehicle’s left side If the electrical system does not work, first inspect the fuses on the vehicle’s left side.
Page 485
Insert a new fuse of the same amperage rating, and make sure it fits tightly. If it does not fit tightly, have an expert install it. We rec- ommend your Toyota dealer. If you have no spare fuses, borrow one of the same rating from a circuit not essential to vehicle operation, such as the AUDIO or OUTLET circuit.
Page 486
Incorrect replacement could cause an electrical shock or a short circuit resulting in a fire. NOTICE Always replace a fuse with a genuine Toyota fuse or equivalent of the same rating. Otherwise you may damage the electric system. YARIS_SEDAN_OM_OM99M18z_(U)
Page 487
5-3. Owner Maintenance Fuse Panel Description ■ Fuse block (Engine compartment) FUSE DESCRIPTION PROTECTED COMPONENT RATING C/U IG1 15 A For protection of various circuits ENGINE IG1 7.5 A Engine control system SUNROOF 10 A — INTERIOR 15 A Overhead light ENG+B 7.5 A Engine control system...
Page 488
5-3. Owner Maintenance FUSE DESCRIPTION PROTECTED COMPONENT RATING A/C MAG 7.5 A Air conditioner Transaxle control system AT PUMP 15 A (if equipped) Transaxle control system 15 A (if equipped) D.LOCK 25 A Power door locks H/L RH 20 A Headlight (RH) ENG+B2 7.5 A...
Page 489
5-3. Owner Maintenance FUSE DESCRIPTION PROTECTED COMPONENT RATING FAN1 30 A Cooling fan FAN3 40 A — ENG.MAIN 40 A Engine control system Power steering system 60 A (if equipped) DEFOG 40 A Rear window defogger 30 A For protection of various circuits INJECTOR 30 A Engine control system...
Page 490
5-3. Owner Maintenance ■ Fuse block (Left side) FUSE DESCRIPTION PROTECTED COMPONENT RATING — — — — — — — — — — — — F.OUTLET 15 A Accessory sockets — — — AT IND 7.5 A AT shift indicator (if equipped) MIRROR 7.5 A Power control mirror...
5-4. Appearance Care Exterior Care The paintwork on your Toyota represents the latest technical developments in composition and methods of application. Environmental hazards, however, can harm the paint’s protec- tive properties, if proper care is not taken. Here are some examples of possible damage, with tips on how to prevent them.
Page 493
5-4. Appearance Care ● Prevention It is necessary to have your Toyota washed and waxed to pre- serve its finish according to the instructions in this section. This should be done as soon as possible. Bird droppings can be removed with a soft sponge and water. If you are traveling and these are not available, a moistened tissue may also take care of the problem.
Page 494
● Chipped paint can lead to rust forming on your Toyota. Before this happens, repair the damage by using Toyota touch-up paint according to the instruc- tions in this section. Failure to repair the affected area could lead to serious rusting and expensive repairs.
Page 495
5-4. Appearance Care ● Do not use abrasive cleansers or wax that contain abrasives. Pay special attention to removing salt, dirt, mud, and other foreign material from the underside of the fenders, and make sure the drain holes in the lower edges of the doors and rocker panels are clean. Insects, tar, tree sap, bird droppings, industrial fallout, and similar deposits can damage the finish if not removed immediately.
Page 496
5-4. Appearance Care ■ Maintaining the Finish ● Toyota is not responsible for scratches caused by automatic car washes or improper washing. ● Scratches are more noticeable on vehicles with darker paint finishes. ● A spot remover to remove oil, tar, and similar materials will usually also take off the wax.
Page 497
Exposed metal quickly rusts and can lead to major repairs. NOTICE If your Toyota is damaged and needs metal parts repaired or replaced, make sure the body shop applies anti- corrosion materials to all parts, both repaired and new. This will prevent them from rusting.
Page 498
5-4. Appearance Care Underbody Maintenance Road chemicals and salt used for ice and snow removal and solvents used for dust control may collect on the underbody. If not removed, they will speed up rusting and deterioration of such underbody parts as fuel lines, frame, floor pan, and exhaust system, even though these parts may be coated with anti-corrosive material.
Page 499
5-4. Appearance Care NOTICE Do not use any detergent other than mild detergent. Before using any deter- gent, verify the ingredients. Otherwise, the product could discolor or stain the aluminum wheels. Plastic Part Maintenance ● When cleaning the plastic lenses of the lights, do not use gasoline, kerosene, rectified spirit, paint, thinner, highly acidic detergents, or strongly alkaline detergents.
5-4. Appearance Care Interior Care WARNING ■ Do not spray water in the cabin Splashing water on electrical parts such as the audio unit and switches is dangerous as it could cause a malfunction or a fire. Dashboard Precautions Prevent caustic solutions such as perfume and cosmetic oils from contacting the dashboard.
Page 501
5-4. Appearance Care Cleaning the Upholstery and Interior Trim ■ Vinyl Remove dust and loose dirt from vinyl with a whisk broom or vac- uum cleaner. Clean vinyl with a leather-and-vinyl cleaner. ■ Leather (if equipped) Remove dust and sand first using a vacuum cleaner or other means, then wipe dirt off using a soft cloth with a leather cleaner or a soft cloth soaked in mild soap.
Page 502
5-4. Appearance Care ■ Cleaning the Upholstery and Interior Trim ● Because genuine leather is a natural material, its surface is not uniform and it may have natural scars, scratches, and wrinkles. ● To maintain the quality for as long as possible, periodical maintenance, about twice a year, is recommended.
Page 503
WARNING ■ Have your Toyota dealer replace damaged seat belts immediately Using damaged seat belts is dangerous. In a collision, damaged belts can- not provide adequate protection. Cleaning the Window Interiors If the windows become covered with an oily, greasy, or waxy film, clean them with glass cleaner.
Page 504
5-4. Appearance Care YARIS_SEDAN_OM_OM99M18z_(U)
If Trouble Arises 6-1. Parking in an Emergency Parking in an Emergency...... 506 6-2. Flat Tire Spare Tire and Tool Storage ......507 Changing a Flat Tire ..512 6-3. Battery Runs Out Jump-Starting....522 6-4. Emergency Starting Starting a Flooded Engine......
6-1. Parking in an Emergency Parking in an Emergency The hazard warning lights should always be used when you stop on or near a roadway in an emer- gency. The hazard warning lights warn other drivers that your vehicle is a traffic hazard and that they must take extreme caution when near Depress the hazard warning flasher and all the turn signals will flash.
6-2. Flat Tire Spare Tire and Tool Storage Spare tire and tools are stored in the locations illustrated in the dia- gram. Type A Spare tire Jack lever Spare tire hold-down bolt Tiedown eyelet (if equipped) Tool bag Lug wrench Jack Flat tire belt Jack point attachment...
Page 508
Tiedown eyelet (if equipped) Lug wrench Jack point attachment Jack lever : The jack point attachment can be used by vehicle repair shops and road assistance services. Consult an authorized Toyota dealer for details. Jack ■ To remove the jack Lift the trunk mat.
Page 509
6-2. Flat Tire Turn the wing bolt and jack screw counterclockwise. Jack screw Wing bolt ■ To secure the jack Insert the wing bolt into the jack with the jack screw pointing to the right side and turn the wing bolt clockwise to temporarily tighten it.
Page 510
6-2. Flat Tire Spare Tire Your Toyota has a temporary spare tire. The temporary spare tire is lighter and smaller than a conventional tire, and is designed only for emergency use and should be used only for VERY short periods.
Page 511
• Do not use a tire chain on this tire because it will not fit properly. • Do not use your temporary spare tire on any other vehicle, it has been designed only for your Toyota. • Use only one temporary spare tire on your vehicle at the same time.
6-2. Flat Tire Changing a Flat Tire If you have a flat tire, drive slowly to a level spot that is well off the road and out of the way of traffic to change the tire. Stopping in traffic or on the shoulder of a busy road is danger- ous.
Page 513
6-2. Flat Tire WARNING ■ Be sure to follow the directions for changing a tire Changing a tire is dangerous if not done properly. The vehicle can slip off the jack and seriously injure someone. No person should place any portion of their body under a vehicle that is supported by a jack.
Page 514
6-2. Flat Tire Removing a Flat Tire If your vehicle is equipped with a wheel cover, pry off the wheel cover with the beveled end of the jack lever. Loosen the lug nuts by turning them counterclockwise one turn each, but do not remove any lug nuts until the tire has been raised off the ground.
Page 515
Before remov- ing the lug nuts, make sure your Toyota is firmly in position and that it cannot slip or move. Remove the lug nuts by turning them counterclockwise; then remove the wheel and center cap.
Page 516
■ Use only the jack provided with your Toyota Using a jack that is not designed for your Toyota is dangerous. The vehi- cle could slip off the jack and seriously injure someone. ■ Never place objects under the jack Jacking the vehicle with an object under the jack is dangerous.
Page 517
6-2. Flat Tire Locking Lug Nuts (if equipped) If your vehicle has Toyota optional antitheft wheel lug nuts, one on each wheel will lock the tires and you must use a special key to unlock them. This key will attach to the lug wrench. Register them with the lock manufacturer by filling out the card provided in the glove com- partment and mailing it in the accompanying envelope.
Page 518
Turn the lug wrench counterclockwise and lower the vehicle. Use the lug wrench to tighten the nuts in the order shown. If you are unsure of how tight the nuts should be, have them inspected at your Toyota dealer. Nut tightening torque ft•lbf (N•m, kgf•m) 80-108 (108-147, 12-14)
Page 519
6-2. Flat Tire Open the trunk mat. Trunk mat Remove the belt for securing the flat tire. Put the flat tire into the trunk on the left and toward the back. Fold the rear seatback forward on the right side of the rear seat. Unlock the rear seatback on the left side and assure a clearance to pass the belt.
Page 520
6-2. Flat Tire Pass the buckle through the wheel as shown in the figure and secure it so that the buckle does not contact the wheel. Vehicles with Aluminum wheel Vehicles with Steel wheel Pass the belt through the buckle, then pull the belt end to secure the flat tire.
Page 521
Be sure to reinstall the same nuts you removed or replace them with metric nuts of the same configuration Because the wheel studs and lug nuts on your Toyota have metric threads, using a non-metric nut is dangerous. On a metric stud, it would not secure the wheel and would damage the stud, which could cause the wheel to slip off and cause an accident.
6-3. Battery Runs Out Jump-Starting Jump-starting is dangerous if done incorrectly. So follow the procedure care- fully. If you feel unsure about jump-starting, we strongly recommend that you have a competent service technician do the work. Jumper cables Discharged battery Booster battery YARIS_SEDAN_OM_OM99M18z_(U)
Page 523
6-3. Battery Runs Out Remove the battery cover. Make sure the booster battery is 12 V and that its negative terminal is grounded. If the booster battery is in another vehicle, do not allow both vehi- cles to touch. Turn off the engine of the vehicle with the booster bat- tery and all unnecessary electrical loads in both vehicles.
Page 524
6-3. Battery Runs Out WARNING ■ Follow These Precautions Carefully To ensure safe and correct handling of the battery, read the following pre- cautions carefully before using the battery or inspecting it. ■ Do not allow the positive (+) terminal to contact any other metal object that could cause sparks Flames and sparks near open battery cells are dangerous.
If the engine fails to start, crank it without depressing the accelera- tor. If the engine still does not start using the above procedure, have your vehicle inspected by your Toyota dealer. YARIS_SEDAN_OM_OM99M18z_(U)
6-4. Emergency Starting Push-Starting Do not push-start your Toyota. You cannot start a vehicle with an automatic transaxle by pushing it. WARNING ■ Never tow a vehicle to start it Towing a vehicle to start it is dangerous. The vehicle being towed could surge forward when its engine starts, causing the two vehicles to collide.
If it is low, look for coolant leaks from the radiator and hoses. ■ If you find a leak or other damage, or if coolant is still leaking: Stop the engine and call your Toyota dealer. Cooling fan Cooling system cap...
Page 528
NOTICE ● If the cooling fan does not operate while the engine is running, the engine temperature will increase. Stop the engine and call your Toyota dealer. ● If the engine continues to overheat or frequently overheats, have the cool- ing system inspected.
6-6. Emergency Towing Towing Description We recommend that towing be done only by your Toyota dealer or a commercial tow-truck service. Proper lifting and towing are nec- essary to prevent damage to the vehicle. Government and local laws must Wheel dollies be followed.
6-6. Emergency Towing Tiedown Hooks NOTICE Do not use the front tiedown eyelet for towing the vehicle. They have been designed only for securing the vehicle to a transport vessel during shipping. Using the eyelet for any other purpose could result in the vehicle being dam- aged.
Page 531
6-6. Emergency Towing NOTICE ● Do not use excessive force as it may damage the cap or scratch the painted bumper surface. ● If the tiedown eyelet is not securely tightened, it may loosen or disengage from the bumper when tying the vehicle. Make sure that the tiedown eyelet is securely tightened to the bumper.
Stop Vehicle in Safe Place Immediately If any of the following warning lights turns on, the system may have a malfunction. Stop the vehicle in a safe place immediately and contact your Toyota dealer. Signal Warning Brake System Warning Light...
Page 533
Start the engine and check the warning light. If the light remains illuminated even though the oil level is normal or after adding oil, stop the engine immediately and have your vehicle towed to your Toyota dealer. YARIS_SEDAN_OM_OM99M18z_(U)
Page 534
There is no problem if the light turns off after a while. Contact your Toyota dealer if the light illuminates/flashes continuously. • If the indicator light illuminates/flashes, the power steer- ing will not operate normally. If this happens, the steer-...
Page 535
■ Do not drive with the brake system warning light illuminated. Contact your Toyota dealer to have the brakes inspected as soon as possible Driving with the brake system warning light illuminated is dangerous. It indi- cates that your brakes may not work at all or that they could completely fail at any time.
Page 536
6-7. Warning/Indicator Lights and Warning Sounds Contact Authorized your Toyota Dealer and Have Vehicle Inspected If any of the following warning lights turns on/flashes, the system may have a malfunction. Contact your Toyota dealer to have your vehicle inspected. Signal Warning...
Page 537
• The fuel-filler cap is missing or not tightened securely. If the check engine light remains on, or it flashes continu- ously, do not drive at high speeds and consult your Toyota dealer as soon as possible. Automatic Transaxle Warning Light The light illuminates when the transaxle has a problem.
Page 538
Toyota dealer or a tire repair station. ■...
Page 539
6-7. Warning/Indicator Lights and Warning Sounds Taking Action Take the appropriate action and verify that the warning light turns off. Signal Warning Action to be taken Low Fuel Warning Light The light turns on when the remaining fuel is about 2.3 gal.
Page 540
6-7. Warning/Indicator Lights and Warning Sounds Signal Warning Action to be taken Seat Belt Warning Light The seat belt warning light turns on if the driver or front passenger’s seat is occupied and the seat belt is not fas- tened with ignition switched ON.
Page 541
6-7. Warning/Indicator Lights and Warning Sounds Signal Warning Action to be taken Inspect the tires and adjust to the specified inflation pressure (P. 470). • Perform tire pressure adjustment when the tires are cold. Tire pressure will vary according to the tire Tire Pressure Monitoring temperature, there-...
Page 542
Put a few drops of water in the valve stem to see if it bubbles indicating a valve. Leaks need addressed by more than simply reinflat- ing the tire as leaks dangerous — take it to your Toyota dealer. YARIS_SEDAN_OM_OM99M18z_(U)
Page 543
Toyota dealer or a tire repair station. ■...
Page 544
6-7. Warning/Indicator Lights and Warning Sounds ■ KEY Warning Light Take the appropriate action and verify that the warning light turns off. Signal Cause Action to be taken The smart key battery is Replace the key battery dead. (P. 467). The smart key is not within the operation range.
6-7. Warning/Indicator Lights and Warning Sounds Message Indicated on Display If a message is displayed in the center display (Type B audio), take appropriate action (in a calm manner) according to the dis- played message. ■ Display example : If equipped.
Page 546
Stop Vehicle in Safe Place Immediately If the following messages are displayed in the center display (Type B audio), a vehicle system may be malfunctioning. Stop the vehicle in a safe place and contact your Toyota dealer. Display Indicated Condition...
In a collision, the air bags and the seat belt pretensioner system will not deploy and this could result in death or serious injury. Contact your Toyota dealer to have the vehicle inspected as soon as possible.
Page 548
6-7. Warning/Indicator Lights and Warning Sounds Seat Belt Warning Beep If the driver’s seat belt is not fastened when the ignition is switched ON, a beep sound will be heard for about 6 seconds. If the driver or the front passenger’s seat belt is not fastened and the vehicle is driven at a speed faster than about 12 mph (20 km/h), a beep sound will be heard again for a specified period of time.
Page 549
6-7. Warning/Indicator Lights and Warning Sounds Ignition Not Switched Off (STOP) Warning Beep If the driver’s door is opened while the ignition is switched to ACC, a continuous beep sound will be heard to notify the driver that the igni- tion has not been switched off (STOP).
Page 550
6-7. Warning/Indicator Lights and Warning Sounds Key Left-in-vehicle Warning Beep (With the advanced keyless function) If a key is left in the vehicle cabin and all the doors and the luggage compartment/trunk are locked using a separate key, a beep sound is heard for about 10 seconds to remind the driver that the key has been left in the vehicle cabin.
Page 551
6-7. Warning/Indicator Lights and Warning Sounds Over Rev. Buzzer (if equipped) The buzzer sounds to notify the driver if the engine speed is about to exceed the permissible engine speed. NOTICE Operate the accelerator and shift gears according to the driving conditions so that the buzzer does not sound.
Move the lever to the left to fold Lever Cover the seatback. Move the lever to the left to open the trunk lid. Type A Type B After performing this emergency measure, have the vehicle inspected at your Toyota dealer as soon as possible. YARIS_SEDAN_OM_OM99M18z_(U)
7-5. Recording of Vehicle Data Defects (Canada).... 555 Recording of Vehicle 7-2. Warranty Data ........ 563 Warranties for Your 7-6. Uniform Tire Quality Grading Toyota ......556 System (UTQGS) Outside the United Uniform Tire Quality States/Canada ....557 Grading System (UTQGS)......564...
National Highway Traffic Safety Administration (NHTSA) in addi- tion to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800-331-4331). If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
7-1. Reporting Safety Defects Reporting Safety Defects (Canada) Canadian customers who wish to report a safety-related defect to Transport Canada, Defect Investigations and Recalls, may tele- phone the toll free hotline 1-800-333-0510, or contact Transport Canada by mail at: Transport Canada, ASFAD, Place de Ville Tower C, 330 Sparks Street, Ottawa ON K1A 0N5.
United States However, in the event that you are moving to Canada permanently, Toyota vehicles built for use in the United States could be eligible for exportation to Canada with specific vehicle modifications to comply with the Canadian Motor Vehicle Safety Standards (CMVSS).
Parts, servicing techniques, and tools necessary to maintain and repair your vehicle may be unavailable. There might not be your Toyota dealer in the country you plan to take your vehicle. The Toyota warranty is valid only in certain countries.
Non-genuine parts and accessories for Toyota vehicles can be found in stores. These may fit your vehicle, but they are not approved by Toyota for use with Toyota vehicles. When you install non-genuine parts or accessories, they could affect your vehicle’s performance or safety systems;...
7-3. Cell Phones Cell Phones Warning WARNING ■ Please comply with the legal regulations concerning the use of com- munication equipment in vehicles in your country Use of any electrical devices such as cell phones, computers, portable radios, vehicle navigation or other devices by the driver while the vehicle is moving is dangerous.
EDR. Toyota will not disclose any of the data recorded in an EDR to a third party unless: ● A written agreement from the vehicle owner or the lessee is obtained ●...
Page 562
7-4. Event Data Recorder However, if necessary Toyota will: ● Use the data for research on Toyota vehicle performance, including safety. ● Disclose the data or the summarized data to a third party for research purposes without disclosing vehicle or owner identification information.
Toyota and its subcontracting parties may obtain and use the recorded data for vehicle malfunction diagnosis, research and development, and quality improvement. Toyota will not disclose or provide any of the obtained data to a third party unless: ● An agreement from the vehicle owner (agreements from lessor and lessee for leased vehicle) is obtained ●...
7-6. Uniform Tire Quality Grading System (UTQGS) Uniform Tire Quality Grading System (UTQGS) This information relates to the tire grading system developed by the U.S. National Highway Traffic Safety Administration for grading tires by tread wear, traction, and temperature performance. Tread Wear The tread wear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified gov-...
Page 565
7-6. Uniform Tire Quality Grading System (UTQGS) Temperature-A, B, C The temperature grades A (the highest), B, and C, represent the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor labora- tory test wheel.
Page 566
7-6. Uniform Tire Quality Grading System (UTQGS) UNIFORM TIRE QUALITY GRADING Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: TREADWEAR 200 TRACTION AA TEMPERATURE A UTQGS MARK (example) TREADWEAR 200 TRACTION AA TEMPERATURE A YARIS_SEDAN_OM_OM99M18z_(U)
7-7. Tire Information (U.S.A.) Tire Labeling Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information identi- fies and describes the fundamental characteristics of the tire and also provides a tire identification number for safety stan- dard certification and in case of a recall.
Page 568
7-7. Tire Information (U.S.A.) P215/65R15 95H is an example of a tire size and load index rating. Here is an explanation of the various components of that tire size and load index rating. Note that the tire size and load index rating may be different from the example.
Page 569
7-7. Tire Information (U.S.A.) Letter Rating Speed Rating 99 mph 106 mph 112 mph 118 mph 124 mph 130 mph 149 mph For tires with a maximum speed capability over 149 mph, tire manufac- turers sometimes use the letters ZR. For tires with a maximum speed capability over 186 mph, tire manufacturers always use the letters ZR.
Page 570
7-7. Tire Information (U.S.A.) ■ Maximum Load Rating This number indicates the maximum load in kilograms and pounds that can be carried by the tire. ■ Maximum Permissible Inflation Pressure This number is the greatest amount of air pressure that should ever be put in the tire under normal driving conditions.
Page 571
7-7. Tire Information (U.S.A.) If your tire size does not begin with a letter this may mean it is designated by either ETRTO (European Tire and Rim Technical Organization) or JATMA (Japan Tire Manufacturing Association). Information on Temporary Tires Please refer to the sample below. Temporary tires Nominal width of tire in millime- ters...
Page 572
7-7. Tire Information (U.S.A.) ● 90 “90” is the Load Index. This two-or three-digit number indicates how much weight each tire can support. ● M “M” is the speed rating. The speed rating denotes the maximum speed for which the use of the tire is rated. Letter Rating Speed Rating 81 mph...
7-7. Tire Information (U.S.A.) Location of the Tire Label (Placard) You will find the tire label containing tire inflation pressure by tire size and other important information on the driver’s side B-pillar or on the edge of the driver’s door frame. SAMPLE Recommended Tire Inflation Pressure On the tire label you will find the recommended tire inflation pressure...
Page 574
7-7. Tire Information (U.S.A.) WARNING ■ Always check the tire inflation pressures on a regular basis accord- ing to the recommended tire inflation pressure on the tire label and in conjunction with the information in this owner’s manual Driving your vehicle with under-inflated tires is dangerous. Under-inflation is the most common cause of failures in any kind of tire and may result in severe cracking, tread separation or “blowout”, with unexpected loss of vehicle control and increased risk of injury.
Page 575
7-7. Tire Information (U.S.A.) Glossary of Terms ● Tire Placard: A label indicating the OE tire sizes, recommended inflation pressure, and the maximum weight the vehicle can carry. ● Tire Identification Number (TIN): A number on the sidewall of each tire providing information about the tire brand and manufacturing plant, tire size, and date of manufacture.
Use the pressures specified on the vehicle tire information placard or tire label for optimum service. Tire Rotation To equalize tire wear and extend tire life, Toyota recommends that tire rotation is carried out at the same interval as tire inspection. Forward Do not include (TEMPORARY USE ONLY) spare tire in rotation.
Page 577
7-7. Tire Information (U.S.A.) Replacing a Tire WARNING ■ Always use tires that are in good condition Driving with worn tires is dangerous. Reduced braking, steering, and traction could result in an accident. If a tire wears evenly, a wear indi- Tread wear cator will appear as a solid band indicator...
Page 578
7-7. Tire Information (U.S.A.) NOTICE If you feel a sudden vibration or ride disturbance while driving or you suspect your tire or vehicle has been damaged, immediately reduce your speed. Drive with caution until you can safely pull off the road. Stop and inspect the tire for damage.
7-7. Tire Information (U.S.A.) Vehicle Loading This section will guide you in the proper loading of your vehicle, to keep your loaded vehicle weight within its design rating capability. Properly loading your vehicle will provide maximum return of vehicle design performance. Before loading your vehicle, familiarize yourself with the following terms for determining your vehicle’s weight ratings, from the vehicle’s Safety Certification Label and Tire and Load Infor- mation Label:...
Page 580
7-7. Tire Information (U.S.A.) SAMPLE CARGO Cargo Weight includes all weight added to the Base Curb Weight, including cargo and optional equipment. The cargo weight limit decreases depending on the number of vehicle occupants. The cargo weight limit can be calculated by subtracting the total weight of the vehicle occupants from the “combination weight of occupants and cargo should never exceed”...
Page 581
7-7. Tire Information (U.S.A.) Examples: Based on a single occupant weight of 150 lb. (68 kg), and a value of 849 lb. (385 kg) for the “combination weight of occupants and cargo should never exceed”: The cargo weight limit with one occupant is 849 lb. (385 kg) - 150 lb. (68 kg) = 699 lb.
Page 582
7-7. Tire Information (U.S.A.) SAMPLE GCW (Gross Combination Weight) is the weight of the loaded vehicle (GVW). YARIS_SEDAN_OM_OM99M18z_(U)
Page 583
7-7. Tire Information (U.S.A.) GCWR (Gross Combination Weight Rating) is the maximum allowable weight of the vehicle - including all cargo and passengers - that the vehicle can handle without risking damage. The GCW must never exceed the GCWR. WARNING ■...
7-7. Tire Information (U.S.A.) Steps for Determining the Correct Load Limit Steps for Determining Correct Load Limit- Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.” on your vehicle’s placard. Determine the combined weight of the driver and passengers that will be riding in your vehicle.
7-8. Declaration of Conformity Declaration of Conformity Keyless Entry System/Immobilizer System Blind Spot Monitoring (BSM) System YARIS_SEDAN_OM_OM99M18z_(U)
Page 586
End- users and installers must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Toyota Canada Customer Interaction Centre ● U.S.A. Phone: 1-866-70-SCION or 1-866-707-2466 (Toll-free) Web: http://www.scion.com/BeSpoke...
Page 587
7-8. Declaration of Conformity ■ Type B For vehicles sold in the U.S.A. and Canada YARIS_SEDAN_OM_OM99M18z_(U)
Page 588
7-8. Declaration of Conformity YARIS_SEDAN_OM_OM99M18z_(U)
8-1. Identification Numbers Vehicle Information Labels Vehicle Identification Number The vehicle identification number legally identifies your vehicle. The number is on a plate attached to the cowl panel located on the left corner of the dashboard. This plate can easily be seen through the windshield.
Page 591
8-1. Identification Numbers Vehicle Emission Control Information Label (U.S.A. and Canada) Tire Pressure Label Engine Number Forward YARIS_SEDAN_OM_OM99M18z_(U)
LP: Low-Power HP: High-Power The spark plugs provide the engine its optimum performance. Consult your Toyota dealer for details. NOTICE When cleaning the iridium plugs, do not use a wire brush. The fine particu- late coating on the iridium alloy and platinum tips could be damaged.
Page 593
8-2. Specifications Lubricant Quality Item Classification Engine oil Refer to Recommended Oil on P. 453. API Service GL-4 Manual transaxle oil 75W-80 Automatic transaxle fluid ATF required Brake/Clutch fluid SAE J1703 or FMVSS116 DOT-3 Refer to Introduction on (P. 442) for owner’s responsibility in protecting your investment.
Page 594
8-2. Specifications Dimensions Item Vehicle specification Overall length 171.7 in. (4,360 mm) Overall width 66.7 in. (1,695 mm) Overall height 58.3 in. (1,480 mm) Front tread 58.9 in. (1,495 mm) Rear tread 58.5 in. (1,485 mm) Wheelbase 101.2 in. (2,570 mm) Weights Weight Item...
Page 595
8-2. Specifications Air Conditioner The type of refrigerant used is indicated on a label attached to the inside of the engine compartment. Check the label before recharging the refrigerant. Refer to Climate Control System on P. 258. Item Classification Refrigerant Type HFC134a (R-134a) Light Bulbs For Exterior light...
Page 596
8-2. Specifications For Interior light Category Light bulb Wattage UNECE Trunk light With map lights Overhead lights Without map lights UNECE stands for United Nations Economic Commission for Europe. Tires Check the tire pressure label for tire size and inflation pressure. Refer to Tire Inflation Pressure on P.
Page 597
• The tires have been optimally matched with the chassis of your vehicle. When replacing tires, Toyota recommends that you replace tires of the same type originally fitted to your vehicle. For details, contact your Toyota dealer. Fuses Refer to Fuses on P. 484.
8-3. Customizable Features Customizable Features The following customizable features can be set or changed by your Toyota dealer. Consult your Toyota dealer for details. Additionally, some of the customizable features can be changed by the customer depending on the feature.
Page 599
8-3. Customizable Features Settings change Avail- method Factory Item Feature able Setting Settings The sys- Refer to Speed Stop- Pre-Colli- ping sion Sys- changed that Refer to Refer On/Off Set- Speed Speed tings on Pre-Col- Speed Pre-Colli- P.
Page 600
8-3. Customizable Features Settings change Avail- method Factory Item Feature able Setting Settings Lock: When Changes Driving the auto Unlock: lock/ In Park/ unlock Lock: function Out of setting for Park Power Unlock: door lock doors Refer to Lock: In Park/ Refer...
Page 601
8-3. Customizable Features Settings change Avail- method Factory Item Feature able Setting Settings method Doors: unlock- Driver’s: Once/ Once, Refer to Refer to Driver’s: doors Set- Smart Once, using the Doors: tings on Key on smart Twice P.
Page 602
8-3. Customizable Features Settings change Avail- method Factory Item Feature able Setting Settings Refer to Locking, method Unlock- ing with unlock- Doors: Request Driver’s: Once/ Switch doors Once, Refer to Driver’s: (With the using the Set- Once, advanced request Doors:...
Page 603
8-3. Customizable Features Settings change Avail- method Factory Item Feature able Setting Settings The func- tion automati- cally lock the doors when Refer to leaving On/Off Set- the vehi- tings on cle while P. 319. carrying Advanced keyless entry sys- changed.
Page 604
8-3. Customizable Features Settings change Avail- method Factory Item Feature able Setting Settings The time required interior lamp turn automati- 60 min- cally can utes/ Refer to 30 min- 30 min- Set- changed utes utes/ tings on (pre- 10 min- P.
Page 605
8-3. Customizable Features Settings change Avail- method Factory Item Feature able Setting Settings Daytime The func- running tion of the lights daytime Refer to Refer running On/Off Set- Daytime lights can tings on Running P. 319. Lights on changed.
Page 606
8-3. Customizable Features Settings change Avail- method Factory Item Feature able Setting Settings The time Coming required home sec- light sys- onds/ head- tem Refer 90 sec- lights Refer to Com- 30 sec- onds/ turn Set- ing Home onds 60 sec- after clos-...
Page 607
resetting economy On/Off proce- reset Monitor dure linked with P. 208. trip meter reset. Though these systems can be turned Off, doing so will defeat the purpose of the system and Toyota recommends that these systems remain On. YARIS_SEDAN_OM_OM99M18z_(U)
Page 608
8-3. Customizable Features Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The volume of the warning beep during Rear Cross Traffic Alert (RCTA) operation cannot be changed. When set to Off, the lights-on reminder is operable. The setting of the lights-on reminder can be changed with the time setting of auto headlight off function set to Off.
Alphabetical index Alphabetical index Automatic Transaxle ....172 Active Adaptive Shift Accessory Socket....434 (AAS)........175 Active Safety System ....213 Direct Mode ......182 Active Safety Technology ..213 Driving tips......183 Blind Spot Monitoring Manual shift mode ....176 (BSM) .........
Page 612
Alphabetical index Drive selection ......210 Exhaust Gas......114 Driving In Flooded Area ..139 Exterior Care......492 Driving Tips Aluminum Wheel Automatic transaxle ....183 Maintenance....... 498 Break-in period ..... 131 Bright-Metal Maintenance..497 Driving in flooded area..139 Maintaining the Finish...
Page 613
Alphabetical index Interior Care ......500 Cleaning the Lap/Shoulder Hazard Warning Flasher ..195 Belt Webbing...... 503 Hazardous Driving....133 Cleaning the Upholstery and Head Restraint ......27 Interior Trim......501 Headlights Cleaning the Window Coming home light system ... 186 Interiors ......
Page 615
Alphabetical index Registering Your Vehicle in A Foreign Country ....558 Parking Brake ......197 Replacement Power Steering ......212 Fuse........484 Power Windows ....... 121 Key battery ......467 Power steering warning Light Bulbs......475 buzzer........550 Tires........472 Wheel ........
Page 616
Alphabetical index Spare Tire ......... 510 Tire inflation pressure Specifications ......592 warning beep......550 Speedometer......154 Tires.......... 470 SRS Air Bags Flat Tire ........ 507 Front passenger occupant Replacing a Tire ....472 classification system..... 78 Replacing a Wheel ....474 How the SRS air bags Snow tires......
Page 617
Alphabetical index Warranty........556 Weights ........594 Vanity Mirrors ......430 Windows Vehicle Information Power windows..... 121 Labels........590 Windshield Washer ....193 Vehicle Stability Control Windshield Wipers ....192 (VSC) ........205 Winter Driving......136 TRAC/VSC Indicator Light ..206 Wiper VSC OFF Indicator Light..
Page 618
Alphabetical index YARIS_SEDAN_OM_OM99M18z_(U)
Page 619
Alphabetical index YARIS_SEDAN_OM_OM99M18z_(U)
Page 620
Alphabetical index YARIS_SEDAN_OM_OM99M18z_(U)
Need help?
Do you have a question about the 2016 Yaris and is the answer not in the manual?
Questions and answers