Peak FCB8N Owner's Manual page 9

To change the PATCH setup, press the
changed between 4Pr mode and 12Pr mode. The
following:
4.2) LED display contrast adjustment: the
following:
Adjust the BANK/PROGRAM
contrast has a range of between 0 (minimum) and 15 (maximum).
4.3) Global CC assignment: the
Once a global CC has been selected, press the
changed. Use the INC+
A1.CH: MIDI Channel for 1
A1.CC: Control Change Number (CC#) for 1
Range: 01127
A2.CH: MIDI Channel for 2
A2.CC: Control Change Number (CC#) for 2
Range: 01127
A3.CH: MIDI Channel for 3
A3.CC: Control Change Number (CC#) for 3
Range: 01127
A4.CH: MIDI Channel for 4
A4.CC: Control Change Number (CC#) for 4
Range: 01127
PEAK FCB8N: Programmable MIDI foot controller
INC+ or DEC-
4.Pr 12.Pr
BANK/PROGRAM
Cont.
display contrast by pressing
BANK/PROGRAM
A1.CH A1.CC

A2.CH A2.CC

A3.CH A3.CC

A4.CH A4.CC

A5.CH A5.CC

A6.CH A6.CC

A7.CH A7.CC

A8.CH

ENTER
and DEC- switches to increment and decrement the value.
st
Global Control Change Message. Range: 0116
st
nd
Global Control Change Message. Range: 0116
nd
rd
Global Control Change Message. Range: 0116
rd
th
Global Control Change Message. Range: 0116
th
switches. The PATCH setup will be
BANK/PROGRAM display will show the
display will show the
INC+ or DEC-
display will show the following:







A8.CC
switch to access the value to be
Global Control Change Message.
Global Control Change Message.
Global Control Change Message.
Global Control Change Message.
switches. The
Page 9 of 16