Exp Mode - Peak FCB8N Owner's Manual

EXP Mode

The expression pedal can be assigned to any Control Change Number on any MIDI channel for each
individual PATCH. To assign the expression pedal:
1. Select the PATCH you want to assign expression pedal to.
2. Enter to Programming Mode.
3. Press EXP switch, the
4. All Programming Menu LED's will be off and the
5. Press and hold the
6. Scroll up and down the sub-menus by pressing
<<PREV to see previous sub-menu:
Once a menu item has been selected, press the
changed. Use the
0 127: Toggles the value between 0 and 127 on each successive press of the INSTANT
ACCESS switch.
E1.CH: MIDI Channel for expression pedal messages.
Range: 0116
E1.CC: Control Change Numbers (CC#) for expression pedal Control Change Messages.
Range: 01127
dAtA: Data display for testing your expression pedal (Input signal checking). If your
expression pedal works with the FCB8N then the
show the pedal position value between 0127
7. To save press the
FCB8N will return to operating mode.
(Please see Programming Mode Entry section)
BANK/PROGRAM
ExP
MENU switch.
E1.CH  E1.CC  dAtA
INC+ and DEC- switches to increment and decrement the value.
SAVE switch or to exit without saving press the
PEAK FCB8N: Programmable MIDI foot controller
display will show the following:
EXP LED will be flashing.
NEXT>> to see the next sub-menu or
ENTER switch to access the value to be
BANK/PROGRAM
CANCEL
display will
switch. The
Page 13 of 16