Table of Contents
Advertisement
HSM Summary Table
After invoking HSM (see page 41), key in one of the following keys to perform
the corresponding function:
Key
[PN] [Enter]
[PN] [K] [Enter]
[PN] [U] [Enter]
[A] [Enter]
[A] [n] [Enter]
[H]
[T]
[F1]
[F2]
[F3]
[F5]
[B]
[R] [Enter]
[D]
[M]
[ ← ]
Switches KVM, Audio, and USB focus directly to the
computer that corresponds to that port ID. (PN = port
number)
Switches KVM focus only directly to the computer that
corresponds to that port ID. (PN = port number)
Switches USB focus only directly to the computer that
corresponds to that port ID. (PN = port number)
Note: This hotkey functions on the first level of an
installation only.
Starts Auto Scan. The KVM focus cycles from port to port
at the default 5-second intervals
Starts Auto Scan at n-second intervals (n = 1–255
seconds)
Toggles between the default ([Num Lock] [-]) and alternate
([Ctrl] [F12]) HSM invocation keys.
Toggles between the default ([Scroll Lock] [Scroll Lock])
and alternate ([Ctrl] [Ctrl]) Port Switching keys.
Sets the port OS to Windows.
Sets the port OS to Mac.
Sets the port OS to Sun.
Performs a keyboard / mouse reset on the target
computer.
Enables/Disables the buzzer.
Resets the hotkey settings to their default status. See
Factory Default Hotkeys and Settings, page 65.
Invokes Video DynaSync, ATEN's exclusive technology
that eliminates boot-up display problems and optimizes
resolution when switching between ports.
Enables/Disables mouse emulation.
Skips to the previous computer on the list, in skip mode.
Chapter 5. Hotkey Operation
Function
49
Advertisement
Table of Contents
