CS1842 / CS1844 User Manual
HSM Summary Table
After invoking HSM (see page 24), key in one of the following keys to perform
the corresponding function:
Key
[F1]
[F2]
[F3]
[F4]
[F5]
[F6] [n][n] [Enter]
[F10]
[B]
[E]
[H]
[K] [Enter]
[M]
[N]
[R] [Enter]
[S]
[T]
[u] [p] [g] [r] [a] [d]
[e] [Enter]
[W]
[X] [Enter]
30
Sets the keyboard and mouse to SPC mode so that it can work
under special operating systems as a standard (104 key)
keyboard and mouse.
Enables Mac keyboard emulation.
Enables Sun keyboard emulation.
Print the switch's current settings via a text editor or word
processor.
Performs a USB keyboard and mouse reset.
Sets the keyboard language layout. Where nn is a two digit
number that represents the keyboard language code (US
English: 33, French: 08, German: 09, Japanese: 15).
Enables Windows keyboard emulation.
Enables/disables the buzzer.
Turns the Power-on-Detection function on/off.
Toggles between the default and alternate HSM invocation keys.
Enables/disables N-key rollover keyboard supporting function.
Enables/disables mouse emulation.
Enables/disables keyboard emulation.
Resets the Hotkey settings to their default status.
Toggles between the default and alternate manual port selection
pushbutton settings.
Toggles between the default and alternate Port Switching keys.
Invokes Firmware Upgrade Mode.
Enables/disables Mouse Port Switching. When enabled, click the
mouse wheel twice to switch ports. Mouse emulation must be
enabled.
Enables/disables Hotkey Port Switching.
Function