Port Os Control; Restore Default Values; Usb Reset - ATEN CS1768 User Manual

Port OS Control

A port's operating system can be changed to match that of the computer
attached to the port. To change a port's operating system, key in the following
hotkey combination:
1. Invoke hotkey mode with the [Num Lock] + [-] or [Ctrl] + [F12]
combination.
2. Key in [Function], where [Function] refers to one of the function keys in
the following table:
After pressing a function key you automatically exit Hotkey mode.

Restore Default Values

This administrator only hotkey restores the CS1768 default values. See
"Factory Default Hotkeys and Settings" on page 65. To restore the default
values, key in the following hotkey combination:
1. Invoke hotkey mode with the [Num Lock] + [-] or [Ctrl] + [F12]
combination.
2. Press [R].
3. Press [Enter].
After you press [Enter], the command line displays RESET TO DEFAULT
SETTING for three seconds; then the message disappears and you
automatically exit Hotkey mode.

USB Reset

If the USB loses focus and needs to be reset, do the following:
1. Invoke HSM (see page 41).
2. Press and release [F5].
Key Description
F1 Sets the Port OS to Windows
F2 Sets the Port OS to Mac
F3 Sets the Port OS to Sun
Chapter 5. Hotkey Operation
47