(1) P.T.O Clutch Lever
(2) Speed Control Pedal
(3) Range Gear Shift Lever (Hi-Lo)
"ON"
"OFF"
"HI"
(N) "NEUTRAL POSITION"
"Lo"
PLACE THE P.T.O CLUTCH LE-
VER IN "OFF" POSITION.
PLACE THE SPEED CON
TROL PEDAL IN "NEUTRAL"
POSITION.
PLACE THE RANGE GEAR
SHIFT LEVER (HI-LO) IN
"NEUTRAL" POSITION.
NOTE
The speed control pedal automatically
return to neutral when the operator's
foot is released from the pedal.
196O602A
OPERATING THE ENGINE 6-3
MOVE THE HYDRAULIC
CONTROL LEVER FORWARD.
(1) Hydraulic Control Lever
(A) "DOWN"
To lower implement, move the hydraulic
control lever forward.
Hydraulic control lever is automatically
returned to neutral position when imple-
ment is down at lowest position.
196O603A