Table of Contents
Advertisement
If fitted into an open draught type fireplace or chimney then it may be
advisable to blank off the aperture to reduce the amount of draught
created through the fireplace, which can cause operation of the safety
cut-out.
Unpacking The Appliance
The Flavel Electric heater is supplied in a single pack carton. All
Instructions should be read prior to unpacking or installing the appliance.
Ensure all parts including loose items have been removed prior to
discarding the packaging.
Product Checklist
1off
Flavel Electric Heater Main Body with Emberbed Fitted
1off
Magnetic Trim Assembly and Magnets
1off
Logset
1off
Remote Control Handset & 2 off AAA Batteries
1off
Installation & User Instruction Book / Guarantee Literature
Appliance Fixing
The heater must be fixed into position using the fixing method detailed
below:
The appliance may be secured using the four No.12 x 40mm screws and
rawlplugs supplied.
Heater Assembly
Decorative Trim
Remove the protective tape from the decorative trim(s) and position onto
the fixing flange. The trim is secured with the 4 magnets supplied.
4
Advertisement
Table of Contents
