Table of Contents
Advertisement
Operation Of The Heater
The heater is operated via the use of the remote control handset as
supplied. (See Fig. 3 below for button layout)
Fig. 3
2 kW Heater Button
(Large Flame)
1 kW Heater Button
(Small Flame)
Light Only Effect
Off Button
Transmit Button
a.) To operate the light effect only, press the transmit button and the light
only effect button at the same time. (See Fig. 3 for button layout)
b)
To operate the 1kW Heater, press the transmit button and the small
flame button at the same time. (See Fig. 3 for button layout)
c)
To operate the 2kW Heater, press the transmit button and the large
flame button at the same time. (See Fig. 3 for button layout)
d)
To turn the light effect and heater off, press the off button. (See Fig. 3
for button layout)
IMPORTANT :
This appliance is fitted with an automatic safety cut out. This operates if
the air outlet beneath the canopy becomes covered or blocked. This will
prevent the fan heater from operating.
In order to RESET the appliance the following procedure should be
followed:-
a)
Switch OFF the appliance and disconnect the appliance from the
mains supply
Safety Cut Out
6
Advertisement
Table of Contents
