Table of Contents
Advertisement
Appliance Data
Supply Voltage
Fuse Rating
Heating Element
Mains Cable
Illumination
The Flavel Electric Heater is manufactured by: -
CFM Europe Limited
Trentham Lakes
Stoke on Trent
Staffordshire ST4 4TJ
Installation Requirements
The Flavel Electric heater is supplied with a moulded two pin plug (13
Amp) and approximately 1.8 metres of flexible mains cable (1mm 2 ). The
appliance and surround should therefore be located close to a suitable
mains socket to enable connection. The electrical socket MUST be easily
accessible to allow disconnection.
This heater MUST be earthed. If in any doubt consult a suitable competent
person.
Connections
L = Brown
N = Blue
Before use ensure that the supply voltage matches that marked on the
appliance.
The mains cable should be routed from the heater to the socket
connection without being trapped or being liable to damage. If the supply
cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid hazard.
230V ac, 50Hz
13 Amp
2 x 1kW
1 x 1.8M PVC 1mm 2
2 x 60W for F22L**RU & F26L**RU
3 x 60W for F33L**RU
E = Green / Yellow
2
Advertisement
Table of Contents
