Table of Contents
Advertisement
Removing the Glass Panel (Models with non opening
doors)
a)
Push spring loaded clips inwards
b)
Lift glass panel clear
Removing the Glass Panel (Models with openable doors)
a)
Locate and remove the top retaining screws
b)
Undo the hinge screws at the bottom ensuring that you maintain a
grip on the doors at all times to prevent them from falling when the
hinge screws are released.
c)
Re-assemble in reverse order
Fitting the Logset
a)
Remove the glass panel and or doors as detailed above.
b)
Fit the log set to the emberbed as shown below in Fig. 2 :-
Fig. 2
Position behind retaining
lugs
5
Advertisement
Table of Contents
