Installation; Before You Begin; Installing Countertop Dispensers Without Legs - Follett 12CI400A-LI Installation, Operation And Service Manual

Installation

Before you begin

§ All dispensers must be installed level in both directions to ensure proper operation.
§ Service and ventilation clearances: 6" (153 mm) on right side of dispenser, 6" (153 mm) at top for ventilation
and 12" (305 mm) at top recommended for service.
§ Countertop units installed without legs provide the option of taking utilities out bottom or back of dispenser
(on wall mount units and countertop units with legs, utilities exit from back). See counter cutout drawings for
bottom exiting utilities on units with and without drain pans. For installations where utilities exit through back of
dispenser, refer to back view drawings.
§ Wall mount models without drain pan are designed for use above sinks.
§ Counter depth must allow front of sink to be a minimum of 23.5 (597 mm) from wall.

Installing countertop dispensers without legs

1. Position dispenser in desired
location, mark dispenser outline
on counter and remove dispenser.
2. Regardless of whether utilities will
exist through back or bottom of
dispenser, drill four (4) 7/16" holes
in counter to anchor dispenser to
counter (Fig. 1).
3. For utilities exiting through
bottom only:
(a) Make cut out as shown in
Fig. 1.
(b) Move plug from drain T to
back of unit (Fig. 2).
4. For all units: Apply a thick
bead approximately 1/4" (6 mm)
diameter of NSF listed silicone
sealant (Dow Corning RTV-732*
or equivalent) 1/4" (6 mm) inside
marked outline of dispenser.
5. Carefully lower dispenser on
counter in proper position and
secure to counter with four (4)
3/8"-16NC bolts.
6. Smooth excess sealant around
outside of dispenser.
* Dow Corning is a register trademark of Dow Corning Corporation in the United States and other countries
12CI400A • 12HI400A
Fig. 1 – Counter information
16"
(407mm)
0.437" (12 mm)
(305mm)
diameter
14.4"
(366mm)
12"
2" (51mm)
cutout for
connections
through bottom
(305mm)
0.8"
(21mm)
1.5"
(39mm)
1" (26mm)
12"
15.9"
(404mm)
18"
(458mm)
4"
(102mm)
5