Adjustable Supporting Legs - SCAN DSA 12 Assembly And Instruction Manual

8

Adjustable supporting legs

The Scan DSA 12 is supplied with adjustable supporting legs. These
legs should be considered as providing an auxiliary function and
can be used during construction if desired. On completion of instal-
lation, the stove must stand on the side pieces.
To adjust the height of the legs, the bottom part of the stove side
plates should be loosened and bent. When the plates are bent, they
can break off. This is not a fault. They can be screwed back on when
you have finished using the supporting function.
F
Scan DSA 12
NAVN:
MATERIALE:
DIMENSION:
C:\Working Folder\Designs\DSA 12\90085019.idw
STI:
Afmontage sideplade
Scan DSA 12
NAVN: EMNE:
MATERIALE:
DIMENSION:
C:\Working Folder\Designs\DSA 12\90085019.idw
STI:
F
Loosen the screws
Afmontage sideplade
EMNE:
N/A
VÆGT:
N/A
AREAL:
N/A 09-06-2011
DATO:
VÆGT:
N/A
AREAL: Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
Bend the side plates
A S S E M B LY
When the supporting legs are in their highest position, the stove
will be 1388.6 mm tall. When they are at the bottom, the stove will
be 989 mm tall.
449,6
403
336,4
269,8
203,2
136,6
70
0
Scan DSA 12
NAVN: EMNE:
MATERIALE:
DIMENSION:
C:\Working Folder\Designs\DSA 12\90085003.idw
STI:
90085019
TG.NR:
09-06-11 BC
DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
90085019
TG.NR:
BC
SIGN:
Målskitse for justerbare ben
N/A
VÆGT: DATO:
N/A Krog Iversen & Co A/S
AREAL:
DK-5492 Vissenbjerg©
Base of Scan DSA 12
1388,6
1322
1255,4
1188,8
1122,2
1055,6
989
90085003
TG.NR:
09-06-11 BC
SIGN:
Side pieces
Side pieces