Table of Contents
Advertisement
User Manual of DS-7200HVI/HFI-SH Series DVR
redundant record is to decide whether you want the camera to save the record files in the redundant
HDD. You must configure the redundant HDD in HDD settings. For detailed information, see
Chapter 10.4.2 S etting H D D Property .
If you want to copy the current main stream settings to other camera (s), click Copy to enter the
5)
Copy Camera interface. Select the camera (s) and click O K to finish the copy settings.
On the Record settings interface, click A pply to save the settings.
6)
Note:
You can click the Restore button to restore the current main stream settings to the default
parameters.
3. Set encoding parameters for sub-stream
Click the Substream tab to enter the Substream settings interface.
1)
2)
Configure the parameters for the sub-stream. Refer to the step of main stream settings.
Click A pply to save the settings.
3)
Note:
You can click the Restore button to restore the current sub-stream settings to the default parameters.
If you want to copy the current sub-stream settings to other camera (s), click Copy to enter the Copy
4)
Camera interface. Select the camera (s) and click O K to finish the copy settings.
5.2 Configuring Record Schedule
Purpose:
Set the record schedule, and then the camera automatically starts/stops recording according to the configured
Figure
5 .4
C opy
C amera
S ettings
Figure
5 .5
E ncoding
P arameters-‐ S ub-‐stream
50
Advertisement
Table of Contents
