HIKVISION DS-7200HVI-SH series User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. DVR
  5. ds-7200HVI-sh series
  6. User manual
HIKVISION DS-7200HVI-SH series User Manual

HIKVISION DS-7200HVI-SH series User Manual

Hide thumbs Also See for DS-7200HVI-SH series:
Table of Contents

Advertisement

Quick Links

Download this manual
DS-7200H V I/H F I-SH Series D V R
USE R M A N U A L

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-7200HVI-SH series and is the answer not in the manual?

Questions and answers

Related Manuals for HIKVISION DS-7200HVI-SH series

Summary of Contents for HIKVISION DS-7200HVI-SH series

  • Page 1 DS-7200H V I/H F I-SH Series D V R USE R M A N U A L...
  • Page 2 The content of this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by Hikvision Digital Technology Co., Ltd. (Hikvision). Hikvision assumes no responsibility or liability for any errors or inaccuracies that may appear in the book.

  • Page 3: Regulatory Information

    User Manual of DS-7200HVI/HFI-SH Series DVR Regulatory Information F C C Information F C C compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 4 User Manual of DS-7200HVI/HFI-SH Series DVR Safety Warnings and C autions Please pay attention to the following warnings and cautions: H azardous Voltage may be present: Special measures and precautions must be taken when using this device. Some potentials (voltages) on the device may present a hazard to the user.
  • Page 5 User Manual of DS-7200HVI/HFI-SH Series DVR Power Cord Requirements: The connector that plugs into the wall outlet must be a grounding-type male plug designed for use in your region. It must have certification marks showing certification by an agency in your region.
  • Page 6 User Manual of DS-7200HVI/HFI-SH Series DVR Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. This manual is applicable to DS-7204HVI-SH, DS-7208HVI-SH, DS-7216HVI-SH; DS-7204HFI-SH, DS-7208HFI-SH and DS-7216HFI-SH series DVR. This manual may contain several technically incorrect places or printing errors, and the content is subject to change without notice.
  • Page 7 User Manual of DS-7200HVI/HFI-SH Series DVR Preventive and C autionary T ips Before connecting and operating your device, please be advised of the following tips: Ensure unit is installed in a well-ventilated, dust-free environment. Unit is designed for indoor use only. Keep all liquids away from the device.

  • Page 8: Product Key Features

    User Manual of DS-7200HVI/HFI-SH Series DVR Product Key Features General PAL/NTSC adaptive video inputs. H.264 video compression with high reliability and superior definition. Each channel supports dual-stream. Independent configuration for each channel, including resolution, frame rate, bit rate, image quality, etc. Input and output video quality is configurable.
  • Page 9 User Manual of DS-7200HVI/HFI-SH Series DVR Searching and playing back record files by channel number, recording type, start time, end time, etc. Smart search for the selected area in the video. Zooming in when playback. Playing reversely. Support pause, speed up, speed down, skip forward, and skip backward when playback, locating by dragging the mouse.
  • Page 10 User Manual of DS-7200HVI/HFI-SH Series DVR Embedded WEB server. Development Scalability: SDK for Windows and Linux system. Source code of application software for demo. Development support and training for application system.

  • Page 11: Table Of Contents

    User Manual of DS-7200HVI/HFI-SH Series DVR TABLE  OF  CONTENTS   Product Key Features ......................7   C H A P T E R 1 ......................... 14   Introduction ..........................14   1.1 Front Panel ........................15   1.2 IR Remote Control Operations ..................16   1.3 USB Mouse Operation ....................
  • Page 12 User Manual of DS-7200HVI/HFI-SH Series DVR 5.8 Files Protection ......................64   C H A P T E R 6 ......................... 67   Playback ............................. 67   6.1 Playing Back Record Files .................... 68   6.1.1 Playing Back by Channel ................... 68   6.1.2 Playing Back by Time ..................
  • Page 13 User Manual of DS-7200HVI/HFI-SH Series DVR 9.4 Network Detection ...................... 125   9.4.1 Testing Network Delay and Packet Loss ............125   9.4.2 Exporting Network Packet ................125   9.4.3 Checking Network Status ................. 127   9.4.4 Checking Network Statistics ................128   C H A P T E R 1 0 ........................
  • Page 14 User Manual of DS-7200HVI/HFI-SH Series DVR 13.4.4 Changing Password of Admin................ 166   13.5 Logging out/Shutting down/Rebooting Device ............167   C H A P T E R 1 4 ........................168   A ppendix ..........................168   Glossary ..........................169   FAQ ...........................

  • Page 15: Chapter 1

    User Manual of DS-7200HVI/HFI-SH Series DVR C H A P T E R 1 Introduction  ...

  • Page 16: Front Panel

    User Manual of DS-7200HVI/HFI-SH Series DVR 1.1 F ront Panel The front panel of DS-7200HVI-SH/DS-7200HFI-ST series is shown in Figure 1.1. Figure   1 .1   F ront   P anel   Table   1 .1   D escription   o f   C ontrol   P anel   B uttons     Name F unction Description P O W E R...

  • Page 17: Ir Remote Control Operations

    User Manual of DS-7200HVI/HFI-SH Series DVR 1.2 I R Remote Control O perations The device may also be controlled with the included IR remote control, shown in Figure 1.2. Note: Batteries (2×AAA) must be installed before operation. Figure   1 .2   R emote   C ontrol   Table  ...
  • Page 18 User Manual of DS-7200HVI/HFI-SH Series DVR Name Description In PTZ control settings, press the REC button and then you can call a PTZ preset by pressing Numeric button. P L A Y Button Entering the All-day Playback menu. I N F O Button Reserved.

  • Page 19: Usb Mouse Operation

    User Manual of DS-7200HVI/HFI-SH Series DVR 1.3 USB Mouse O peration A regular 3-button (Left/Right/Scroll-wheel) USB mouse can also be used with this device. To use a USB mouse: 1. Plug USB mouse into one of the USB interfaces on the front panel of the device. 2.
  • Page 20 User Manual of DS-7200HVI/HFI-SH Series DVR Lowercase/Uppercase Backspace Space Enter Exit...

  • Page 21: Rear Panel

    User Manual of DS-7200HVI/HFI-SH Series DVR 1.5 Rear Panel The rear panels of DS-7200HVI-SH/DS-7200HFI-SH series are shown in Figure 1.4, Figure 1.5 and Figure 1.6. Figure   1 .4   R ear   P anel   o f   D S-­‐7204HVI/HFI-­‐ S H   Figure  ...

  • Page 22: Starting Up And Shutting Down The Device

    User Manual of DS-7200HVI/HFI-SH Series DVR 1.6 Starting Up and Shutting Down the Device Purpose: Proper startup and shutdown procedures are crucial to expanding the life of the device. Before you start: Check that the voltage of the extra power supply is the same with the requirement, and the ground connection is working properly.
  • Page 23 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   1 .9   M essage   B ox   f or   P ower   O ff       4. Turn off the power switch on the rear panel of DVR. Rebooting the device In the Shutdown menu (Figure 1.7), you can also click Reboot to reboot the device.

  • Page 24: Chapter 2

    User Manual of DS-7200HVI/HFI-SH Series DVR C H A P T E R 2 Getting  Started...
  • Page 25 User Manual of DS-7200HVI/HFI-SH Series DVR The Setup Wizard can walk you through some important settings of the device. By default, the Setup Wizard starts once the device has loaded. Operating the Setup Wizard: Select the system resolution from the drop-down menu. The default resolution is 1280×1024/60Hz. Click A pply to save the resolution settings.
  • Page 26 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   2 .3   L ogin   W indow   Click the Next button to enter the Date and T ime settings window, as shown in Figure 2.4. Set the time zone, date format, system date and system time. Figure  ...
  • Page 27 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   2 .5   N etwork   C onfiguration             Click Next button to enter the H D D M anagement window, shown in Figure 2.6. To initialize the HDD, click the Init button.
  • Page 28 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   2 .7   R ecord   S ettings   Click Copy to copy the record settings of the current camera to other camera (s) if needed, as shown in Figure 2.8. Figure   2 .8   C opy   R ecord   S ettings     Click O K to return to the Record Settings window.

  • Page 29: Chapter 3

    User Manual of DS-7200HVI/HFI-SH Series DVR C H A P T E R 3 Live  View  ...

  • Page 30: Introduction Of Live View

    User Manual of DS-7200HVI/HFI-SH Series DVR 3.1 Introduction of L ive View Live view shows you the video image getting from each camera in real time. The device automatically enters Live View mode when powered on. It is also at the very top of the menu hierarchy, thus pressing the ESC many s you to the Live View mode.

  • Page 31: Operations In Live View Mode

    User Manual of DS-7200HVI/HFI-SH Series DVR 3.2 O perations in L ive View Mode In live view mode, the following functions can be realized: Single Screen: showing only one screen on the monitor. M ulti-screen: showing multiple screens on the monitor simultaneously. A uto-switch: the screen is auto switched to the next one.

  • Page 32: Using An Auxiliary Monitor

    User Manual of DS-7200HVI/HFI-SH Series DVR Next Screen Switch to the next screen. Start/Stop Auto-switch Enable/disable the auto-switch of the screens. Start Recording Start all-day normal recording or motion detection recording for all channels. Quick Set Set the video output mode to Standard, Bright, Gentle or Vivid. All-day Playback Play back the video of the selected channel.
  • Page 33 User Manual of DS-7200HVI/HFI-SH Series DVR Instant Playback only shows the record in last five minutes. If no record is found, it means there is no record during the last five minutes. Digital Zoom can zoom in the selected area to the full screen. You can left-click and draw to select the area for zooming in, as shown in Figure 3.3.
  • Page 34 User Manual of DS-7200HVI/HFI-SH Series DVR Adjust the image parameters including the brightness, contrast, saturation, hue and sharpness by moving the sliding bar or increasing/decreasing the value. Note: The adjustable value range for the brightness, contrast, saturation and hue is 0~ 255 and for the sharpness is 0~ 15.

  • Page 35: Adjusting Live View Settings

    User Manual of DS-7200HVI/HFI-SH Series DVR 3.3 A djusting L ive View Settings Purpose: Live View settings can be customized according to different needs. You can configure the output interface, dwell time for screen to be shown, mute or turning on the audio, the screen number for each channel, etc. Steps: 1.
  • Page 36 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   3 .7   L ive   V iew-­‐   C amera   O rder   To set the camera order: Click the View tab to enter the camera order settings interface. Select the video output Click the up and down button at each screen to select the channel you would like to display.

  • Page 37: Channel-Zero Encoding

    User Manual of DS-7200HVI/HFI-SH Series DVR 3.4 C hannel-zero E ncoding Purpose: Sometimes you need to get a remote view of many channels in real time from web browser or CMS (Client Management System) software, in order to decrease the bandwidth requirement without affecting the image quality, channel-zero encoding is supported as an option for you.

  • Page 38: User Logout

    User Manual of DS-7200HVI/HFI-SH Series DVR 3.5 User Logout Purpose: After logging out, the monitor turns to the live view mode and if you want to do some operation, you need to enter user name and password to log in again. Steps: 1.

  • Page 39: Chapter 4

    User Manual of DS-7200HVI/HFI-SH Series DVR C H A P T E R 4 PTZ  Controls  ...

  • Page 40: Configuring Ptz Settings

    User Manual of DS-7200HVI/HFI-SH Series DVR 4.1 Configuring P T Z Settings Purpose: Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done before you control the PTZ camera. Before you start: Check that the PTZ and the device are connected properly through RS-485 interface.

  • Page 41: Calling Presets

    User Manual of DS-7200HVI/HFI-SH Series DVR Figure   4 .2   P TZ-­‐   M ore   S ettings   2. Use the directional button to wheel the camera to the location where you want to set preset. 3. Click the round icon before Save Preset. 4.

  • Page 42: Customizing Patrols

    User Manual of DS-7200HVI/HFI-SH Series DVR Figure   4 .4   P TZ-­‐   C all   P reset   3. Choose the preset number. C all preset in live view mode: Steps: 1. Click the PTZ Control icon in the quick setting bar to enter the PTZ setting menu in live view mode. Figure  ...
  • Page 43 User Manual of DS-7200HVI/HFI-SH Series DVR Menu>Camera>PTZ>More Settings 2. Select patrol number. 3. Select the under Patrol option box to add key points for the patrol. Figure   4 .6   P TZ-­‐   A dd   K ey   P oint  ...

  • Page 44: Calling Patrols

    User Manual of DS-7200HVI/HFI-SH Series DVR Figure   4 .8   K eyPoints   D eletion   4.2.4  Calling  Patrols   Purpose: Calling a patrol makes the PTZ to move according the predefined patrol path. C alling patrol in the P T Z setting interface: Steps: 1.

  • Page 45: Customizing Patterns

    User Manual of DS-7200HVI/HFI-SH Series DVR 1. Press PTZ control on the IR remote, or click PTZ Control icon on the quick setting toolbar, to show the PTZ control toolbar. 2. Choose Patrol on the control bar. 3. Click the patrol you want to call. Figure  ...

  • Page 46: Calling Patterns

    User Manual of DS-7200HVI/HFI-SH Series DVR under the image to move the PTZ camera. The movement of the PTZ is recorded as the pattern. 4. Click to save the pattern. Repeat the above steps to save more patterns. 4.2.6  Calling  Patterns   Purpose: Follow the procedure to move the PTZ camera according to the predefined patterns.

  • Page 47: Ptz Control Toolbar

    User Manual of DS-7200HVI/HFI-SH Series DVR 4.3 P T Z Control Toolbar In the Live View mode, you can press the PTZ Control button on the IR remote control, or choose the PTZ Control icon to enter the PTZ toolbar. Figure  ...

  • Page 48: Chapter 5

    User Manual of DS-7200HVI/HFI-SH Series DVR C H A P T E R 5 Record  Settings  ...

  • Page 49: Configuring Encoding Parameters

    User Manual of DS-7200HVI/HFI-SH Series DVR 5.1 Configuring E ncoding Parameters Purpose: By configuring the encoding parameters you can define the transmission stream type, the resolution and so on. Before you start: 1. Make sure that the HDD has already been installed. If not, please install a HDD and initialize it. (Menu>HDD>General) Figure  ...
  • Page 50 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   5 .3   E ncoding   P arameters-­‐Main   S tream   2. Set encoding parameters for main stream Select Record to enter the main stream settings interface. Select the camera for configuration. Configure the following parameters for the Main Stream (Normal) and the Main Stream (Event): Stream Type: Set the stream type to be Video or Video &...

  • Page 51: Configuring Record Schedule

    User Manual of DS-7200HVI/HFI-SH Series DVR redundant record is to decide whether you want the camera to save the record files in the redundant HDD. You must configure the redundant HDD in HDD settings. For detailed information, see Chapter 10.4.2 S etting H D D Property . If you want to copy the current main stream settings to other camera (s), click Copy to enter the Copy Camera interface.
  • Page 52 User Manual of DS-7200HVI/HFI-SH Series DVR schedule. Steps: 1. Enter the Record Schedule interface. Menu>Record>Schedule 2. Configure Record Schedule 1) Click Schedule to enter the record schedule settings interface. Figure   5 .6   R ecord   S chedule   2) Choose the camera you want to configure.
  • Page 53 User Manual of DS-7200HVI/HFI-SH Series DVR other days, click Copy. Figure   5 .8   C opy   S chedule   t o   O ther   D ays   Note: The Holiday option is available in the Schedule dropdown list when you have enabled holiday schedule in Holiday settings.
  • Page 54 User Manual of DS-7200HVI/HFI-SH Series DVR 3) You can repeat the above steps to set schedule for other channels. If the settings can also be used to other channels, click Copy to enter the Copy Camera interface and then choose the channel to which you want to copy.

  • Page 55: Configuring Motion Detection Record

    User Manual of DS-7200HVI/HFI-SH Series DVR 5.3 Configuring Motion Detection Record Purpose: Follow the steps to set the motion detection parameters. In the live view mode, once a motion detection event takes place, the device can analyze it and do many actions to handle it. Enabling motion detection function can trigger certain channels to start recording, or trigger full screen monitoring, audio warning, notify the surveillance center and so on.
  • Page 56 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   5 .14   M otion   D etection   H andling     5) Select the channels which you want the motion detection event to trigger recording. 6) Click A pply to save the settings. 7) Click OK to back to the upper level menu.
  • Page 57 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   5 .16   E dit   S chedule-­‐   M otion   D etection   3) In the message box, you can choose the day to which you want to set schedule. 4) Set the Type as Motion.

  • Page 58: Manual Record

    User Manual of DS-7200HVI/HFI-SH Series DVR Figure   5 .18   C opy   S chedule   t o   O ther   D ays   7) Click O K to back to upper level menu. If you can to copy the same schedule settings to other camera (s), click Copy to enter the Copy Camera interface, and then select the camera (s) you want to copy.

  • Page 59: Configuring Holiday Record

    User Manual of DS-7200HVI/HFI-SH Series DVR Figure   5 .20   M anual   R ecord     Enable recording for camera (s). Click the status button beside each camera number to change , or you can enable recording for all cameras by clicking the status bar before A nalog to change it to Set recording mode to manual.
  • Page 60 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   5 .22   E dit   H oliday   S ettings   2) Check the checkbox after E nable. 3) Select Mode from the dropdown list. There are three different modes for the date format to configure holiday schedule. 4) Set the start and end date.
  • Page 61 User Manual of DS-7200HVI/HFI-SH Series DVR 7) Set start/end time for holiday schedule. Note: Up to 8 periods can be configured for each day. And the time periods each other. In the time table of the channel, both holiday schedule and normal day schedule are displayed. Repeat the above steps4)-7) to set Holiday schedule for other channel.

  • Page 62: Configuring Redundant Record

    User Manual of DS-7200HVI/HFI-SH Series DVR 5.6 Configuring Redundant Record Purpose: Enabling redundant recording, which means saving the record files not only in the R/W (read/write) HDD but also in the redundant HDD, will effectively enhance the data safety and reliability. Note: You must set the Storage mode in the HDD advanced settings to Group before you set the HDD property to Redundant.

  • Page 63: Configuring Hdd Group For Record

    User Manual of DS-7200HVI/HFI-SH Series DVR Figure   5 .26   E ncoding   R ecord   2) Select Camera you want to configure. 3) Check the checkbox of the Redundant Record. 4) Click A pply to save settings and back to the upper level menu. Repeat the above steps2)-4) for configuring other channels.
  • Page 64 User Manual of DS-7200HVI/HFI-SH Series DVR Choose the Channels which you want to save the record files in the HDD group. 1) Select A dvanced on the left bar. Figure   5 .28   H DD-­‐ A dvanced   2) Choose Group number in the dropdown list of Record on H D D G roup. 3) Check the channels you want to save in this group.

  • Page 65: Files Protection

    User Manual of DS-7200HVI/HFI-SH Series DVR 5.8 F iles Protection Purpose: You can lock the recorded files or set the HDD property to Read-only to protect the record files from being overwritten. Protect file by locking the record files: Steps: Enter Playback setting interface.
  • Page 66 User Manual of DS-7200HVI/HFI-SH Series DVR Find the record files you want to protect, and then click the icon which will turn to indicating that the file is locked. Note: The record files of which the recording is still not com Click to change it to to unlock the file and the file is not protected.
  • Page 67 User Manual of DS-7200HVI/HFI-SH Series DVR Note: -only HDD. If you want to save files in the HDD, change the property to R/W. Note: If there is only one HDD and is set to Read-only, the device mode is available. If you set the HDD to Read-only when the device is saving files in it, then the file will be saved in next R/W HDD.

  • Page 68: Playback

    User Manual of DS-7200HVI/HFI-SH Series DVR C H A P T E R 6 Playback  ...

  • Page 69: Playing Back Record Files

    User Manual of DS-7200HVI/HFI-SH Series DVR 6.1 Playing Back Record F iles 6.1.1  Playing  Back  by  Channel     Purpose: Play back the recorded video files of a specific channel in the live view mode. Channel switch is supported. Instant playback by channel: Steps: Choose a channel in live view mode using the mouse and click the...
  • Page 70 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   6 .   2   R ight-­‐click   M enu   u nder   L ive   V iew     Press P L AY button on the IR remote control to play back record files of the channel under single-screen live view.
  • Page 71 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   6 .   4   A ll-­‐day   P layback   I nterface   w ith   C hannel   L ist     Dates marked in colors: : No record files in this day. : There is record file(s) in this day (not current day).

  • Page 72: Playing Back By Time

    User Manual of DS-7200HVI/HFI-SH Series DVR 6.1.2  Playing  Back  by  Time   Purpose: Play back video files recorded in specified time duration. Multi-channel simultaneous playback and channel switch are supported. Steps: 1. Enter playback interface. Menu>Playback 2. Set search conditions and click the Playback button to enter Playback interface. Figure  ...

  • Page 73: Playing Back By Normal Video Search

    User Manual of DS-7200HVI/HFI-SH Series DVR Figure   6 .8   T oolbar   o f   P layback   b y   T ime   Table   6 .2   D etailed   E xplanation   o f   P layback-­‐by-­‐time   T oolbar   Button O peration Button...
  • Page 74 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   6 .9   N ormal   V ideo   S earch     2. Choose a record file you want to play back. If there is only one channel in the search result, clicking button takes you to Full-screen Playback interface of this channel.
  • Page 75 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   6 .   1 1   S elect   C hannels   f or   S ynchronous   P layback     4. Synchronous Playback interface. The toolbar in the bottom part of Playback interface can be used to control playing process. Figure  ...

  • Page 76: Playing Back By Event Search

    User Manual of DS-7200HVI/HFI-SH Series DVR Figure   6 .   1 3   4 -­‐ch   S ynchronous   P layback   I nterface   w ith   V ideo   L ist     Figure   6 .   1 4   T oolbar   o f   N ormal   P layback  ...
  • Page 77 User Manual of DS-7200HVI/HFI-SH Series DVR 1. Enter the playback interface. Menu>Playback 2. Select E vent tab to enter the Event Playback interface. 3. Select Motion as the event type. 4. Set the start time and end time of the record files. 5.
  • Page 78 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   6 .   1 7   E vent   D etails     8. Or you can directly click the button of each file item to enter its playback interface. The toolbar in the bottom part of Playback interface can be used to control playing process.

  • Page 79: Playing Back By Tag

    User Manual of DS-7200HVI/HFI-SH Series DVR Figure   6 .   1 9   I nterface of   P layback   b y   E vent   ( 2)       Figure   6 .   2 0   T oolbar   o f   P layback   b y   E vent  ...
  • Page 80 User Manual of DS-7200HVI/HFI-SH Series DVR Video tag allows you to record related information like people and location of a certain time point during playback. You are also allowed to use video tag(s) to search for record files and position time point. Before playing back by tag: 1.
  • Page 81 User Manual of DS-7200HVI/HFI-SH Series DVR Note: Two tag types are selectable: All and Tag Keyword . Input keyword if you choose Tag Keyword . Figure   6 .   2 3   V ideo   S earch   b y   T ag     2.
  • Page 82 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   6 .   2 5   I nterface   o f   P layback   b y   T ag   The hidden list of tags will be displayed by moving the mouse to the right of the playback interface. Figure  ...

  • Page 83: Playing Back By System Log

    User Manual of DS-7200HVI/HFI-SH Series DVR Previous tag Next tag Tag search Exit Video type Hide Progress bar Note: Playback progress bar: use the mouse to click any point of the progress bar or drag the progress bar to locate special frames. About video type bar: represents normal recording (manual or schedule);...
  • Page 84 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   6 .   2 9   R esult   o f   S ystem   L og   S earch   3. Choose a log with record file and click button to enter Playback interface. Note: If there is no record file at the time point of the log, the message box No result found The toolbar in the bottom part of Playback interface can be used to control playing process.

  • Page 85: Auxiliary Functions Of Playback

    User Manual of DS-7200HVI/HFI-SH Series DVR 6.2 A uxiliary F unctions of Playback 6.2.1  Playing  Back  Frame  by  Frame   Purpose: Play video files frame by frame, in order to check image details of the video when abnormal events happen. Steps: Go to Playback interface.
  • Page 86 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   6 .   3 2   R ight-­‐click   M enu   i n   A ll-­‐day   P layback   I nterface   3. You can click button to set the full screen as target searching area. After drawing area(s), click button to execute smart search in this area.

  • Page 87: Digital Zoom

    User Manual of DS-7200HVI/HFI-SH Series DVR Figure   6 .34   S mart   S earch   R esult   w ith   V ideo   L ist     Figure   6 .35   T oolbar   o f   S mart   S earch   P layback  ...
  • Page 88 User Manual of DS-7200HVI/HFI-SH Series DVR interface. 2. Use the mouse to draw a red rectangle and the image within it will be enlarged up to 16 times. Figure   6 .36   D raw   A rea   f or   D igital   Z oom  ...

  • Page 89: Chapter 7

    User Manual of DS-7200HVI/HFI-SH Series DVR C H A P T E R 7 Backup  ...

  • Page 90: Backing Up Record Files

    User Manual of DS-7200HVI/HFI-SH Series DVR 7.1 Backing up Record F iles Before you start: Please insert the backup device(s) into the device. 7.1.1  Quick  Export   Purpose: Export record files to backup device(s) quickly. Steps: 1. Enter Video Export interface. Menu>Export>Normal Figure  ...
  • Page 91 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   7 .2   Q uick   E xport   u sing   U SB1-­‐1 3. In the Export interface, choose backup device and click Export button to start exporting. Note: Here we use USB Flash Drive and please refer to the next section Normal Backup for more backup devices supported by the device.

  • Page 92: Backing Up By Normal Video Search

    User Manual of DS-7200HVI/HFI-SH Series DVR 7.1.2  Backing  up  by  Normal  Video  Search   Purpose: The record files can be backup to various devices, such as USB devices (USB flash drives, USB HDDs, USB writer) and SATA writer. Backup using USB flash drives, USB H D Ds, USB w riter and SA T A w riter Steps: 1.
  • Page 93 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   7 .6   R esult   o f   N ormal   V ideo   S earch   f or   B ackup   4. Export the record files. Click E xport button and start backup. Note: If the inserted device is not recognized: Click the Refresh button.
  • Page 94 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   7 .   8   E xport   b y   N ormal   V ideo   S earch   u sing   U SB   W riter     Stay in the Exporting interface until all record files are exported with pop- finished Figure  ...

  • Page 95: Backing Up By Event Search

    User Manual of DS-7200HVI/HFI-SH Series DVR Figure   7 .   1 1   C heckup   o f   E xport   R esult   u sing   U SB   W riter       7.1.3  Backing  up  by  Event  Search   Purpose: Back up event-related record files using USB devices (USB flash drives, USB HDDs, USB writer), or SATA writer.
  • Page 96 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   7 .13   R esult   o f   E vent   S earch   6. Select record files to export. Select motion detection event (s) from the list and click Q uick E xport button to enter the Export interface, as shown in Figure 7.15.
  • Page 97 User Manual of DS-7200HVI/HFI-SH Series DVR You can also format USB flash drive or USB HDDs via the device. Figure   7 .15   E xport   b y   E vent   U sing   U SB   F lash   D rive  ...

  • Page 98: Backing Up Video Clips

    User Manual of DS-7200HVI/HFI-SH Series DVR 7.1.4  Backing  up  Video  Clips   Purpose: You may also select video clips to export directly during Playback, using USB devices (USB flash drives, USB HDDs, USB writer), or SATA writer. Steps: 1. Enter Playback interface. Please refer to Chapter 6 .
  • Page 99 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   7 .20   E xport   V ideo   C lips   U sing   U SB   F lash   D rive Stay in the Exporting interface until all record files are exported with pop- finished Figure  ...

  • Page 100: Managing Backup Devices

    User Manual of DS-7200HVI/HFI-SH Series DVR 7.2 M anaging Backup Devices M anagement of USB flash drives, and USB H D Ds. Enter Search Result interface of record files. Menu>Export>Normal Set search condition and click Search button to enter Search Result interface. Note: At least one channel shall be selected.
  • Page 101 User Manual of DS-7200HVI/HFI-SH Series DVR Backup device management. Click New Folder button if you want to create a new folder in the backup device. Select a record file or folder in the backup device and click button if you want to delete it. Select a record file in the backup device and click button to play it.
  • Page 102 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   7 .26   N ormal   V ideo   S earch   f or   B ackup Select record files you want to back up. Click E xport button to enter Export interface. Note: At least one record file shall be selected.
  • Page 103 User Manual of DS-7200HVI/HFI-SH Series DVR Check for compatibility from vendor.   Figure   7 .28   U SB Writer Management...

  • Page 104: Chapter 8

    User Manual of DS-7200HVI/HFI-SH Series DVR C H A P T E R 8 Alarm  Settings  ...

  • Page 105: Setting Motion Detection

    User Manual of DS-7200HVI/HFI-SH Series DVR 8.1 Setting Motion Detection Steps: 1. Enter Motion Detection interface and choose a camera you want to set motion detection. Menu> Camera> Motion Figure   8 .1   M otion   D etection   S etup   I nterface  ...
  • Page 106 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   8 .3   S et   T rigger   C amera   o f   M otion   D etection   4. Set up arming schedule of the channel. Select A rming Schedule Choose one day of a week and up to eight time periods can be set within each day.
  • Page 107 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   8 .5   C opy   S ettings   o f   M otion   D etection  ...

  • Page 108: Detecting Video Loss

    User Manual of DS-7200HVI/HFI-SH Series DVR 8.2 Detecting Video Loss Purpose: Detect video loss of a channel and take alarm response action(s). Steps: 1. Enter Video Loss interface of Camera Management. Menu> Camera> Video Loss Figure   8 .6   V ideo   L oss   S etup   I nterface  ...

  • Page 109: Detecting Video Tampering

    User Manual of DS-7200HVI/HFI-SH Series DVR 8.3 Detecting Video Tampering Purpose: Trigger alarm when the lens is covered and take alarm response action(s). Steps: 1. Enter Video Tampering interface of Camera Management. Menu> Camera> Tamper-proof Figure   8 .8   T amper-­‐proof   S etup   I nterface  ...

  • Page 110: Handling Exceptions

    User Manual of DS-7200HVI/HFI-SH Series DVR 8.4 H andling E xceptions Purpose: Exception settings refer to the handling method of various exceptions, e.g., ll: The HDD is full. : Writing HDD error, unformatted HDD, etc. Disconnected network cable. Conflicted: Duplicated IP address. Login: Incorrect user ID or password.

  • Page 111: Setting Alarm Response Actions

    User Manual of DS-7200HVI/HFI-SH Series DVR 8.5 Setting A larm Response A ctions Purpose: The alarm response actions will be activated when an exception occurs, including Full Screen Monitoring, Audible Warning, Notify Surveillance Center, and Send Email. F ull Screen Monitoring When an alarm event (motion detection/tamper-proof/video loss detection) is triggered, the local monitor (HDMI/VGA or BNC monitor) display in full screen the video image from the alarming channel configured for full screen monitoring.

  • Page 112: Chapter 9

    User Manual of DS-7200HVI/HFI-SH Series DVR C H A P T E R 9 Network  Settings  ...

  • Page 113: Configuring General Settings

    User Manual of DS-7200HVI/HFI-SH Series DVR 9.1 Configuring G eneral Settings Purpose: Network settings must be properly configured before you operate device over network. Steps: 1. Enter the Network Settings interface. Menu > Configuration > Network Figure   9 .   1   G eneral   N etwork   S ettings   I nterface       2.

  • Page 114: Configuring Ddns

    User Manual of DS-7200HVI/HFI-SH Series DVR Figure   9 .2   P PPoE   S ettings   I nterface   Check the PPPoE checkbox to enable this feature. Enter User Name, Password, and Confirm Password for PPPoE access. Note: The User Name and Password should be assigned by your ISP. Figure  ...
  • Page 115 User Manual of DS-7200HVI/HFI-SH Series DVR Note: The Server A ddress should be the IP address of the PC that runs IPServer. Figure   9 .5   I PServer   S ettings   I nterface   DynD NS: 1) Enter Server A ddress for DynDNS (e.g. members.dyndns.org). 2) In the Device Domain Name text field, enter the domain obtained from the DynDNS website.
  • Page 116 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   9 .8   N O-­‐IP   S ettings   I nterface   H iD D NS: You need to enter the Server A ddress and Device Domain Name for HiDDNS, and other fields are read only. 1) Enter the Server A ddress of the HiDDNS server: www.hik-online.com.

  • Page 117: Configuring Ntp Server

    User Manual of DS-7200HVI/HFI-SH Series DVR Figure 9.11 Register the Device Note: Only lower-case English alphabet, numeric and - can be used in the alias of the device and the alias must be started with letters of the lower-case English alphabet. Click the A pply button to save and exit the interface.

  • Page 118: Configuring Upnp

    User Manual of DS-7200HVI/HFI-SH Series DVR You can use SNMP protocol to get device status and parameters related information. Steps: Enter the Network Settings interface. Menu > Configuration > Network Select the SN M P tab to enter the SNMP Settings interface. Figure  ...

  • Page 119: Configuring Remote Alarm Host

    User Manual of DS-7200HVI/HFI-SH Series DVR 2. Select the UPnP tab to enter the UPnP interface. Figure   9 .15   U PnP   S ettings   I nterface   3. Check checkbox to enable UPnP . 4. Click to open the External Port Settings dialog box.

  • Page 120: Configuring Multicast

    User Manual of DS-7200HVI/HFI-SH Series DVR installed. Steps: Enter the Network Settings interface. Menu > Configuration > Network Select the More Settings tab to enter the More Settings interface. Figure   9 .18   M ore   S ettings   I nterface   Enter A larm Host IP and A larm Host Port in the text fields.

  • Page 121: Configuring Rtsp

    User Manual of DS-7200HVI/HFI-SH Series DVR Figure   9 .20   C onfigure   M ulticast   Click the A pply button to save and exit the interface. 9.2.8  Configuring  RTSP   Purpose: The RTSP (Real Time Streaming Protocol) is network control protocol designed for use in entertainment and communications systems to control streaming media servers.

  • Page 122: Configuring Email

    User Manual of DS-7200HVI/HFI-SH Series DVR Figure   9 .22   H ost/Others   S ettings   M enu   Enter the Server Port and HTTP Port in the text fields. The default Server Port is 8000 and the HTTP Port is 80, and you can change them according to different requirements.
  • Page 123 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   9 .24     E mail   S ettings   I nterface Configure the following Email settings: E nable Server A uthentication (optional): Check the checkbox to enable the server authentication feature. User Name: The SMTP server authentication.
  • Page 124 User Manual of DS-7200HVI/HFI-SH Series DVR Click the A pply button to save the Email settings. You can click the T est button to test whether your Email settings work. The corresponding Attention message box will pop up.     Figure  ...

  • Page 125: Checking Network Traffic

    User Manual of DS-7200HVI/HFI-SH Series DVR 9.3 C hecking Networ k Traffic Purpose: You can check the network traffic to obtain real-time information of device such as linking status, MTU, sending/receiving rate, etc. Steps: Enter the Network Traffic interface. Menu > Maintenance > Net Detect Figure  ...

  • Page 126: Network Detection

    User Manual of DS-7200HVI/HFI-SH Series DVR 9.4 Networ k Detection Purpose: You can obtain network connecting status of device through the network detection function, including network delay, packet loss, etc. 9.4.1  Testing  Network  Delay  and  Packet  Loss     Steps: Enter the Network Traffic interface.
  • Page 127 User Manual of DS-7200HVI/HFI-SH Series DVR 3. Select the backup device from the dropdown list of Device Name, as shown in Figure 9.27. Note: Click the Refresh button if the connected local backup device cannot be displayed. When it fails to detect the backup device, please check whether it is compatible with the device.

  • Page 128: Checking Network Status

    User Manual of DS-7200HVI/HFI-SH Series DVR 9.4.3  Checking  Network  Status     Purpose: You can also check the network status and quick set the network parameters in this interface. Steps: Click Status on the right bottom of the page. Figure  ...

  • Page 129: Checking Network Statistics

    User Manual of DS-7200HVI/HFI-SH Series DVR Figure   9 .34   N etwork   P arameters   C onfiguration   9.4.4  Checking  Network  Statistics     Purpose : You can check the network statistics to obtain the real-time information of the device. Steps: 1.

  • Page 130: Hdd  Management

    User Manual of DS-7200HVI/HFI-SH Series DVR C H A P T E R 1 0 HDD  Management  ...

  • Page 131: Initializing Hdds

    User Manual of DS-7200HVI/HFI-SH Series DVR 10.1 Initializing H D Ds Purpose: A newly installed hard disk drive (HDD) must be initialized before it can be used with your device.   Steps: Enter the HDD Information interface. Menu > HDD>General Figure  ...
  • Page 132 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   1 0.   3   S tart   I nitialization     After the HDD has been initialized, the status of the HDD will change from Uninitialized to Nor m al . Figure  ...

  • Page 133: Managing Network Hdd

    User Manual of DS-7200HVI/HFI-SH Series DVR 10.2 M anaging Networ k H D D Purpose: You can add the allocated NAS or disk of IP SAN to device, and use it as network HDD. Steps: Enter the HDD Information interface. Menu >...
  • Page 134 User Manual of DS-7200HVI/HFI-SH Series DVR 1) Enter the NetHDD IP address in the text field. 2) Enter the NetHDD Directory in the text field. 3) Click the O K button to add the configured NAS disk. Note:  Up to 8 NAS disks can be added. Figure  ...
  • Page 135 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   1 0.9   I nitialize   A dded   N etHDD    ...

  • Page 136: Managing Hdd Group

    User Manual of DS-7200HVI/HFI-SH Series DVR 10.3 M anaging H D D G roup 10.3.1  Setting  HDD  Groups   Purpose: Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a particular HDD group through HDD settings. Steps: Enter the Storage Mode interface.

  • Page 137: Setting Hdd Property

    User Manual of DS-7200HVI/HFI-SH Series DVR Figure   1 0.12   L ocal   H DD   S ettings   I nterface     Select the Group number for the current HDD. Note: The default group No. for each HDD is 1. Click the O K button to confirm the settings.
  • Page 138 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   1 0.14   S et   H DD   P roperty Set the HDD property to R/W, Read-only or Redundancy. Click the O K button to save the settings and exit the interface. In the HDD Information menu, the HDD property will be displayed in the list.

  • Page 139: Configuring Quota Mode

    User Manual of DS-7200HVI/HFI-SH Series DVR 10.4 Configuring Q uota Mode Purpose Each camera can be configured with allocated quota for the storage of recorded files. Steps Enter the Storage Mode interface. Menu > HDD > Advanced Set the Mode to Q uota. Note: The device must be rebooted to enable the changes to take effect.
  • Page 140 User Manual of DS-7200HVI/HFI-SH Series DVR Select the camera (s) to be configured with the same quota settings. You can also click the checkbox of A nalog to select all cameras. Click the O K button to finish the Copy settings and back to the Storage Mode interface. Click the A pply button to apply the settings.

  • Page 141: Checking Hdd Status

    User Manual of DS-7200HVI/HFI-SH Series DVR 10.5 C hecking H D D Status Purpose: You may check the status of the installed HDDs on device so as to take immediate check and maintenance in case of HDD failure.   C hecking H D D Status in H D D Infor mation Interface Steps: Enter the HDD Information interface.

  • Page 142: Checking S.m.a.r.t. Information

    User Manual of DS-7200HVI/HFI-SH Series DVR 10.6 C hecking S.M . A .R. T. Information Purpose: The S.M.A.R.T. ( Self-Monitoring, Analysis and Reporting Technology ) is a monitoring system for HDD to detect and report on various indicators of reliability in the hopes of anticipating failures. Steps: Enter the S.M.A.R.T.

  • Page 143: Configuring Hdd Error Alarms

    User Manual of DS-7200HVI/HFI-SH Series DVR 10.7 Configuring H D D E r ror A larms Purpose: You can configure the HDD error alarms when the HDD status is Uninitialized or Abnor m al . Steps: Enter the Exception interface. Menu >...

  • Page 144: C Amera Settings

    User Manual of DS-7200HVI/HFI-SH Series DVR C H A P T E R 11 Camera  Settings  ...

  • Page 145: Configuring Osd Settings

    User Manual of DS-7200HVI/HFI-SH Series DVR 11.1 Configuring OSD Settings Purpose: You can configure the OSD (On-screen Display) settings for the camera, including date /time, camera name, etc. Steps: 1. Enter the OSD Configuration interface. Menu > Camera > OSD 2.

  • Page 146: Configuring Privacy Mask

    User Manual of DS-7200HVI/HFI-SH Series DVR Click the O K button to finish the Copy settings and back to the OSD Configuration interface. 8. Click the A pply button to apply the settings. Note: You can also click the Restore to restore the current OSD settings to the default parameters. 11.2 Configuring Privacy M ask Purpose: You are allowed to configure the four-sided privacy mask zones that cannot be viewed by the operator.

  • Page 147: Configuring Video Parameters

    User Manual of DS-7200HVI/HFI-SH Series DVR Please refer to step 7 of Chapter 11.1 Configuring O S D S ettings . 7. Click the A pply button to save the settings. Note: You can also click the Restore to restore the current OSD settings to the default parameters. 11.3 Configuring Video Parameters Steps: 1.

  • Page 148: Device M Anagement And M Aintenance

    User Manual of DS-7200HVI/HFI-SH Series DVR C H A P T E R 1 2 Device  Management  and  Maintenance    ...

  • Page 149: Viewing System Information

    User Manual of DS-7200HVI/HFI-SH Series DVR 12.1 Viewing System Information 12.1.1  Viewing  Device  Information   Steps: 1. Enter the System Information interface. Menu > Maintenance > System Info 2. Click the Device Info tab to enter the Device Information menu to view the device name, model, serial No. , firmware version and encoding version.

  • Page 150: Viewing Network Information

    User Manual of DS-7200HVI/HFI-SH Series DVR Figure   1 2.3   R ecord   I nformation   I nterface       12.1.4  Viewing  Network  Information   Steps: 1. Enter the System Information interface. Menu > Maintenance > System Info 2.
  • Page 151 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   1 2.5   H DD   I nformation   I nterface    ...

  • Page 152: Searching & Exporting Log Files

    User Manual of DS-7200HVI/HFI-SH Series DVR 12.2 Searching & E xporting Log F iles Purpose: The operation, alarm, exception and information of the device can be stored in log files, which can be viewed and exported at any time. Steps: 1.
  • Page 153 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   1 2.7   L og   S earch   R esults       5. You can click the button of each log or double click it to view its detailed information. And you can also click the button to view the related video files if available.

  • Page 154: Importing/Exporting Configuration Files

    User Manual of DS-7200HVI/HFI-SH Series DVR Figure   1 2.9   E xport   L og   F iles     7. Select the backup device from the dropdown list of Device Name. 8. Click the Export to export the log files to the selected backup device. You can click the New Folder button to create new folder in the backup device, or click the Format button to format the backup device before log export.
  • Page 155 User Manual of DS-7200HVI/HFI-SH Series DVR Figure   1 2.10   I mport/Export   C onfig   F ile     2. Click the Export button to export configuration files to the selected local backup device. 3. To import a configuration file, select the file from the selected backup device and click the Import button. After the import process is completed, you must reboot the device.

  • Page 156: Upgrading System

    User Manual of DS-7200HVI/HFI-SH Series DVR 12.4 Upgrading System Purpose: The firmware on your device can be upgraded by local backup device or remote FTP server. 12.4.1  Upgrading  by  Local  Backup  Device   Steps: 1. Connect your device with a local backup device where the update firmware file is located. 2.
  • Page 157 User Manual of DS-7200HVI/HFI-SH Series DVR 3. Enter the FTP Server Address in the text field. 4. Click the Upgrade button to start upgrading. 5. After the upgrading is complete, reboot the device to activate the new firmware.

  • Page 158: Restoring Default Settings

    User Manual of DS-7200HVI/HFI-SH Series DVR 12.5 Restoring Default Settings Steps: Enter the Default interface. Menu > Maintenance > Default Figure   1 2.13   R estore   F actory   D efault     Click the O K button to restore the default settings. Note: Except the network parameters (including IP address, subnet mask, gateway, MTU and server port), all other parameters of the device will be restored to factory default settings.

  • Page 159: Others

    User Manual of DS-7200HVI/HFI-SH Series DVR C H A P T E R 1 3 Others    ...

  • Page 160: Configuring General Settings

    User Manual of DS-7200HVI/HFI-SH Series DVR 13.1 Configuring G eneral Settings Purpose: You can configure the BNC output standard, VGA/HDMI output resolution, mouse pointer speed, etc. Steps: Enter the General Settings interface. Menu > Configuration > General Select the General tab. Figure  ...

  • Page 161: Configuring Dst Settings

    User Manual of DS-7200HVI/HFI-SH Series DVR 13.2 Configuring DST Settings Steps: Enter the General Settings interface. Menu >Configuration>General Choose DST Settings tab. Figure   1 3.   2   D ST   S ettings   I nterface   You can check the checkbox before the A uto DST A djustment item. Or you can manually check the Enable DST checkbox, and then you choose the date of the DST period.

  • Page 162: Configuring More Settings

    User Manual of DS-7200HVI/HFI-SH Series DVR 13.3 Configuring More Settings Steps: Enter the General Settings interface. Menu > Configuration > General Click the More Settings tab to enter the More Settings interface. Figure   1 3.3   M ore   S ettings   I nterface  ...

  • Page 163: Managing User Accounts

    User Manual of DS-7200HVI/HFI-SH Series DVR 13.4 M anaging User A ccounts Purpose: There is a default account in the device: Ad m inistrator . The Ad m inistrator user name is ad m in and the password is 12345 . The Ad m inistrator has the permission to add and delete user and configure user parameters. 13.4.1  Adding  a  User  ...
  • Page 164 User Manual of DS-7200HVI/HFI-SH Series DVR O perator: The Operator user level has permission of Local Log Search in Local Configuration, Remote Log Search and Two-way Audio in Remote Configuration and all operating permission in Camera Configuration. G uest: The Guest user has permission of Local Log Search in Local Configuration, Remote Log Search in Remote Configuration and only has the local/remote playback in the Camera Configuration.

  • Page 165: Deleting A User

    User Manual of DS-7200HVI/HFI-SH Series DVR Local Advanced Operation: Operating HDD management (initializing HDD, setting HDD property), upgrading system firmware, clearing I/O alarm output. Local Shutdown /Reboot: Shutting down or rebooting the device. Remote Configuration Remote Log Search: Remotely viewing logs that are saved on the device. Remote Parameters Settings: Remotely configuring parameters, restoring factory default parameters and importing/exporting configuration files.

  • Page 166: Editing A User

    User Manual of DS-7200HVI/HFI-SH Series DVR Figure   1 3.8   D elete   a   U ser   Click the icon to delete the selected user. 13.4.3  Editing  a  User   Steps: Enter the User Management interface. Menu > Configuration > User Select the user to be edited from the list.

  • Page 167: Changing Password Of Admin

    User Manual of DS-7200HVI/HFI-SH Series DVR Figure   1 3.10   E dit   U ser   I nterface   Edit the user information, including user name, password, level and MAC address. Click the O K button to save the settings and exit the menu. 13.4.4  Changing  Password  of  Admin  ...

  • Page 168: Logging Out/Shutting Down/Rebooting Device

    User Manual of DS-7200HVI/HFI-SH Series DVR 13.5 Logging out/Shutting down/Rebooting Device Steps: 1. Enter the Shutdown interface. Menu > Shutdown Figure   1 3.12   S hutdown   M enu   2. Click the Logout button to log out, or Click the Shutdown button to shut down the device, or Click the Reboot button to reboot the device.

  • Page 169: Appendix

    User Manual of DS-7200HVI/HFI-SH Series DVR C H A P T E R 1 4 Appendix  ...

  • Page 170: Glossary

    User Manual of DS-7200HVI/HFI-SH Series DVR G lossary Dual Stream: Dual stream is a technology used to record high resolution video locally while transmitting a lower resolution stream over the network. The two streams are generated by the device, with the main stream having a maximum resolution of 4CIF and the sub-stream having a maximum resolution of CIF.

  • Page 171: Faq

    User Manual of DS-7200HVI/HFI-SH Series DVR FA Q W hy does my device ma ke a beeping sound after booting? The possible reasons for the warning beep on the device are as follows: There is no HDD installed in the device. The HDD is not initialized.

This manual is also suitable for:

Ds-7200hfi-sh series

Table of Contents