Configuring Record/Capture Schedule - HIKVISION DS-9600NI-ST Series Quick Operation Manual

User Manual of DS-9600/8600/7700/7600NI-ST and DS-7700/7600NI-SP Series NVR

5.2 Configuring Record/Capture Schedule

Purpose:
Set the record schedule, and then the camera automatically starts/stops recording according to the configured
schedule.
In this chapter, we take the record schedule procedure as an example, and the same procedure can be applied to
Note:
configure schedule for both recording and capture. To schedule the automatic capture, you need to choose the
Capture tab in the Schedule interface.
Steps:
1. Enter the Record Schedule interface.
Menu>Record/Capture>Schedule
2. Configure Record Schedule
1) Select Record/Capture Schedule.
2) Choose the camera you want to configure.
Select the check box after the Enable Schedule item.
3)
There are two ways to edit the schedule.
Click Edit button or click on the color icon under the edit button and draw the schedule line on the
4)
panel.
Edit the schedule:
I. In the message box, you can choose the day to which you want to set schedule.
Figure 5.6 Record Schedule
66