Configuring Redundant Record - HIKVISION DS-7200HVI-SH series User Manual

User Manual of DS-7200HVI/HFI-SH Series DVR

5.6 Configuring Redundant Record

Purpose:
Enabling redundant recording, which means saving the record files not only in the R/W (read/write) HDD but
also in the redundant HDD, will effectively enhance the data safety and reliability.
Note:
You must set the Storage mode in the HDD advanced settings to Group before you set the HDD property
to Redundant. For detailed information, please refer to Chapter 10.4 Managing H D D Group . There should be at
least another HDD (NetHDD) which is in R/W mode.
Steps:
1. Enter HDD Information interface.
Menu> HDD
2. Select the H D D and click
1) Set the HDD property to Redundant.
2) Click A pply to save the settings.
3) Click O K to back to the upper level menu.
3. Enter the Record setting interface.
Menu> Record> Encoding
1)
Select Record.
Figure 5 .24 H DD G eneral
to enter the Local HDD Settings interface.
Figure 5 .25 H DD G eneral-­‐Editing
61