HIKVISION DS-7200HVI-SH series User Manual page 25

User Manual of DS-7200HVI/HFI-SH Series DVR
The Setup Wizard can walk you through some important settings of the device. By default, the Setup Wizard
starts once the device has loaded.
Operating the Setup Wizard:
1.
Select the system resolution from the drop-down menu. The default resolution is 1280×1024/60Hz.
Click A pply to save the resolution settings.
2. Check the checkbox to enable Setup Wizard when device starts. Click Next to continue the setup wizard.
You can also click C ancel to exit the Setup Wizard, or use the Setup Wizard next time by leaving the
w
3. Click Next button on the Wizard window to enter the Login window, as shown in Figure 2.3.
1) Enter the admin password. By default, the password is 12345.
To change the admin password, check the New A dmin Password checkbox. Enter the new password
2)
and confirm the password in the given fields.
Figure 2 .1 S tart W izard I nterface
and exit.
Figure 2 .2 S tart W izard I nterface
24