Gamma 5800 Els Owner's Manual page 15

MACHINE FUNCTIONS
Pressing the PRE-STRETCH button will toggle the Pre-stretch function on and of f and display
the Pre-stretch Icon and Pre-Stretch Setting. When the Pre-Stretch function is enabled, a
small Pre-stretch Icon will appear on the Stringing Screen below the Tens digit of the tension
setting. When the Pre-stretch function is disabled, or when the pre-stretch setting is 0%, the
Pre-stretch Icon will not be visible on the Stringing Screen.
stretch Setting in 1% increments and any of the F6, F7 or F8 keys to decrease the Pre-stretch
Setting in 1% increments. When the desired Pre-stretch Setting is displayed, press ENTER
to save the Pre-stretch Setting for the active Memory Setting.
NOTE: Selectable Pre-stretch Settings range from 0% to 30% in 1% increments.
stretch Setting in 1% increments and any of the F6, F7 or F8 keys to decrease the Pre-stretch
Setting in 1% increments. When the desired Pre-stretch Setting is displayed, press ENTER
to accept and save the Pre-stretch Setting for the active Memory Setting. If no other buttons
are pressed within 10 seconds the display will return to the Stringing Screen. Pressing the
ESC or RETURN button will immediately return to the Stringing Screen.
Pre-stretch Function
The Pre-stretch function is used to pre-
stretch strings by increasing the applied
tension by a set percentage over the tension
setting before releasing the string and re-
pulling to the desired tension. This function
helps to reduce the amount of tension loss
in the strings over time.
Setting the Pre-Stretch from the
Stringing Screen
To change the Pre-stretch Setting while in the
Stringing Screen, press the PRE-STRETCH
button once and while the Pre-Stretch Icon
is visible on the display, press and hold the
PRE-STRETCH button again until the Pre-
stretch Setting is highlighted. Press any of
the F2, F3 or F4 keys to increase the Pre-
Setting the Pre-stretch from the
Settings Screen
To change the Pre-stretch Setting from the
Settings Screen, press F1 to display the
Settings Screen. After the Settings Screen
appears on the display , press the PRE-
STRETCH button to highlight the Pre-stretch
Setting above the Pre-stretch Icon. Press any
of the F2, F3 or F4 keys to increase the Pre-
15