Gamma 5800 Els Owner's Manual page 14

MACHINE FUNCTIONS
the Pulling Speed Icon. Press any of the F2, F3 or F4 buttons to increase the Pulling Speed
Setting in 10% increments and any of the F6, F7 or F8 buttons to decrease Pulling Speed
Setting in 10% increments. When the desired Pulling Speed Setting is displayed, press the
ENTER button to save the Pulling Speed Setting for the active Memory Setting.
NOTE: Selectable Pulling Speeds range from 30% (Slowest Pulling Speed) to 100%
(Fastest Pulling Speed) in 10% increments.
and any of the F6, F7 or F8 buttons to decrease Pulling Speed Setting in 10% increments.
the desired Pulling Speed Setting is entered press the ENTER button to accept and save the
Pulling Speed Setting for the active Memory Setting. If no other buttons are pressed within 10
seconds the display will return to the Stringing Screen. Pressing the ESC or RETURN button
will immediately return to the Stringing Screen.
NOTE: The slowest pulling speed should always be used when stringing very stiff
strings, such as aramid fi ber strings. Stringing at slower pulling speeds will help to
reduce tension loss over time for any string types, especially for strings that tend to
lose tension more quickly than others.
Setting the Pulling Speed from the
Stringing Screen
To change the Pulling Speed Setting while
in the Stringing Screen,
PULLING SPEED button to display the Pull-
ing Speed Icon and Pulling Speed Setting
on the display . Then press and hold the
PULLING SPEED button again until the
Pulling Speed Setting is highlighted above
Setting the Pulling Speed from the
Settings Screen
To change the Pulling Speed Setting from the
Settings Screen, f rst press F1 to display the
Settings Screen. After the Settings Screen
appears on the display , press the PULLING
SPEED button to highlight the Pulling Speed
Setting above the Pulling Speed Icon. Press
any of the F2, F3 or F4 buttons to increase
the Pulling Speed Setting in 10% increments
14
f rst press the
After