[Default Settings] - [Xps Settings] - Konica Minolta bizhub C3350 User Manual

1.5 Available operations in Administrator mode
Item
[Print Quality Settings]
[Image Printing]
[Text Printing]
[Graphics Printing]
[Simulation]

[Default Settings] - [XPS Settings]

To display: Administrator mode - [Print] - [Default Settings] - [XPS Settings]
Specify whether or not to perform the verification of a digital signature or printing of error information when
directly printing an XPS file.
Item
[Digital Signature]
[Print to XPS Error]
[Applied Functions]
Description
Adjust the image quality for PostScript printing.
Select the RGB image data processing method.
• [RGB SOURCE]: Specify the color space of the input RGB. [sRGB] is spec-
ified by default.
• [RGB Intent]: Specify the color conversion property that is changed from in-
put RGB to device CMYK. [Photographic] is specified by default.
• [RGB Gray Treatment]: Specify the printing method of black and gray
colors. [Composite Black] is specified by default.
• [Destination Profile]: Specify the output profile. [Auto] is specified by de-
fault.
Select the RGB text data processing method.
• [RGB SOURCE]: Specify the color space of the input RGB. [sRGB] is spec-
ified by default.
• [RGB Intent]: Specify the color conversion property that is changed from in-
put RGB to device CMYK. [Vivid] is specified by default.
• [RGB Gray Treatment]: Specify the printing method of black and gray
colors. [Black and Gray] is specified by default.
• [Destination Profile]: Specify the output profile. [Auto] is specified by de-
fault.
Select the RGB graphic data processing method.
• [RGB SOURCE]: Specify the color space of the input RGB. [sRGB] is spec-
ified by default.
• [RGB Intent]: Specify the color conversion property that is changed from in-
put RGB to device CMYK. [Vivid] is specified by default.
• [RGB Gray Treatment]: Specify the printing method of black and gray
colors. [Black and Gray] is specified by default.
• [Destination Profile]: Specify the output profile. [Auto] is specified by de-
fault.
Configure the simulation settings.
• [Simulation Profile]: Select the simulation profile for input CMYK. [None] is
specified by default.
• [Intent]: Specify the color conversion property for simulation. [Relative
Color] is specified by default.
• [CMYK Gray Treatment]: Specify the printing method of plate K in the
CMYK input data for simulation. [Composite Black] is specified by default.
Description
Select whether or not to verify a digital signature when an XPS file with a digital
signature is printed.
When [Enable] is selected, the data is not printed if the signature is invalid.
[Disable] is specified by default.
Select whether or not to print error information when an error occurs when an
XPS file is being printed.
[On] is specified by default.
1
1-44