[Snmp Settings] - Konica Minolta bizhub C3350 User Manual

1.5 Available operations in Administrator mode

[SNMP Settings]

To display: Administrator mode - [Network] - [SNMP Settings] - [SNMP Settings]
Configure the settings for obtaining the machine information and monitoring the machine using SNMP (Sim-
ple Network Management Protocol).
Item
[SNMP Settings]
[SNMP]
[SNMP v1/v2c (IP)]
[SNMP v3 (IP)]
[UDP Port]
[SNMP v1/v2c Settings]
[Read Community
Name]
[Write]
[Write Community
Name]
[Applied Functions]
Description
Configure the SNMP settings.
Select whether or not to use SNMP.
[Enable] is specified by default.
Select whether or not to use SNMP v1 or SNMP v2.
[Enable] is specified by default.
Select whether or not to use SNMP v3.
[Enable] is specified by default.
If necessary, change the UDP port number.
[161] is specified by default.
Configure the SNMP v1/v2c settings.
Enter a read-only community name (using ASCII characters of up to 15 bytes,
excluding spaces, \, ,' ,", and #).
[public] is specified by default.
Select whether or not to enable the read and write functions.
[Enable] is specified by default.
If [Write] is set to [Enable], enter the community name in the read-write enable
state (using ASCII characters of up to 15 bytes, excluding spaces, \, ,' ,", and
#).
[private] is specified by default.
1
1-62