Control Panel Error Messages; Messages About Supplies - Xerox Phaser 6128MFP User Manual

Control Panel Error Messages

This section describes the messages displayed on the control panel.

Messages About Supplies

Message
Replace Fuser
010-351
Restart Printer
010-359
Fuser Error
Restart Printer
010-317
Insert Fuser
Restart Printer
Replace XXX Cartridge
Toner Cartridge
093 - NNN
Insert XXX Cartridge
093 - NNN
Insert XXX Cartridge
Insert Imaging Unit
Replace Imaging Unit
Downloaded From ManualsPrinter.com Manuals
*1 XXX indicates one of the following: the Yellow Toner (Y), Cyan Toner (C), Magenta
Toner (M), or Black Toner (K).
*2 NNN indicates a numeric value.
Phaser® 6128MFP Multifunction Printer
Condition/Reason/Action
Time to replace the fuser.
Turn off printer. Replace the old fuser with a new one.
The fuser is not installed correctly or is not working correctly due to
damage or malfunction.
Turn off printer. Reinstall the fuser.
The fuser is not installed.
Turn off printer. Install the fuser.
The toner cartridge has become empty.
Replace the old toner cartridge with a new one.
The XXX toner cartridge is not installed correctly or is not working
correctly due to damage or malfunction.
Reinstall the toner cartridge.
The XXX toner cartridge is not installed correctly or is not working
correctly due to damage or malfunction.
Reinstall the toner cartridge.
The imaging unit is not installed.
Install the imaging unit.
Time to replace the imaging unit. Replace old imaging unit with
new one.
145
Control Panel Error Messages