User Safety; Electrical Safety - Xerox Phaser 6128MFP User Manual

'

User Safety

This chapter includes:
•
•
•
•
•
•
Your printer and the recommended supplies have been designed and tested to meet strict
safety requirements. Attention to the following information ensures the continued safe
operation of your printer.

Electrical Safety

•
•
•
•
•
Warning:
grounded. Electrical products may be hazardous if misused.
•
•
•
•
Warning:
voltage point or shorting out a part could result in fire or electrical shock.
If you notice unusual noises or odors:
1. Turn off the printer immediately.
2. Disconnect the power cord from the electrical outlet.
3. Call an authorized service representative to correct the problem.
Downloaded From ManualsPrinter.com Manuals
Electrical Safety on page 9
Laser Safety on page 10
Maintenance Safety on page 10
Operational Safety on page 10
Moving the Printer on page 12
Safety Symbols Marked on Printer
Use the power cord supplied with your printer.
Plug the power cord directly into a properly grounded electrical outlet. Make sure each
end of the cord is securely connected. If you do not know if an outlet is grounded, ask
an electrician to check the outlet.
Do not use a ground adapter plug to connect the printer to an electrical outlet that
does not have a ground connection terminal.
Do not use an extension cord or power strip.
Verify that the printer is plugged into an outlet that is capable of providing the correct
voltage and power. Review the printer's electrical specification with an electrician
if necessary.
Avoid the potential of electrical shock by ensuring that the printer is properly
Do not place the printer in an area where people might step on the power cord.
Do not place objects on the power cord.
Do not block the ventilation openings. These openings are provided to prevent
overheating of the printer.
Do not drop paper clips or staples into the printer.
Do not push objects into slots or openings on the printer. Making contact with a
Phaser® 6128MFP Multifunction Printer
on page 14
9
1