Setting Up Scanning; Scanning Setup Overview; Setting Up Scanning To A Shared Folder On Your Computer - Xerox Phaser 6128MFP User Manual

Hide thumbs Also See for Phaser 6128MFP:
Table of Contents

Advertisement

Setting up Scanning

This section includes:
See also:

Scanning Setup Overview

The printer is enabled for scanning (if you are connected to a network). However, before
you can scan you must do the following:
If you are connected via USB, you can not scan to an email address or a network location.
You can scan to a folder on your computer, or scan into an application after you have
installed scan drivers and the Express Scan Manager utility. For more information about
installing scan drivers and utilities, see

Setting Up Scanning to a Shared Folder on Your Computer

Before you can scan to a shared folder you must:
Note:
monitor your printer using the printer's embedded web server. You can access
CentreWare IS by entering your printer's IP address in your web browser.
Sharing the Folder - Windows
To enable a folder on your PC computer for network sharing:
1. Open Windows Explorer.
2. Right-click the folder you want to share, and then select Properties.
3. Click the Sharing tab, and then click Share this folder.
4. Click the Permissions button.
5. Select the Everyone group, and verify that all permissions are enabled.
6. Click OK. Write down the Share name; you will need it later.
Downloaded From ManualsPrinter.com Manuals
Scanning Setup Overview
Setting Up Scanning to an FTP Server
Setting Up Scanning to a Shared Folder on Your Computer
Setting Up Scanning to an Email Address
Setting Up Scanning - USB
Scanning
on page 77
Scanning to a shared folder on your computer - Share the folder, and add the folder as
an Address Book entry in CentreWare IS.
Scanning to an FTP server - Add the FTP server as an Address Book entry in
CentreWare IS.
Scanning to an email address - Configure the email server in CentreWare IS.
Share the folder.
Add the folder as an Address Book entry in CentreWare IS.
CentreWare IS is a web-based interface that allows you to manage, configure, and
Phaser® 6128MFP Multifunction Printer
on page 37
on page 39
on page 40
on page 40
Installing the Software
37

Setting up Scanning

on page 37
on page 31.

Advertisement

Table of Contents
loading

Table of Contents