Print-Quality Problems - Xerox Phaser 6128MFP User Manual

Print-Quality Problems

When the print quality is poor, select the closest symptom from the following table to
correct the problem.
If the print quality does not improve after carrying out the appropriate action, contact
Xerox Customer Support or your reseller.
Note:
designed to cease functioning at a predetermined point.
Symptom
Part of image missing
Faded printouts
Downloaded From ManualsPrinter.com Manuals
To enhance print quality, toner cartridges for many models of equipment have been
Reason/Action
Part of the imaging unit protective sheet is still in the printer. Follow these steps
to fix the problem:
• Remove the imaging unit.
• Remove the protective sheet from the imaging unit.
• Confirm that all yellow shipping ribbons have been removed from the right
side of the imaging unit.
• Replace the imaging unit.
Multiple colors faded:
• The toner cartridges are not Xerox toner cartridges.
Verify that the toner cartridges (C/M/Y/K) meet specifications, and replace
if necessary.
• Remove the protective sheet from the imaging unit.
• The paper is outside the recommended specification range.
Replace the media with a recommend size and type, and confirm that your
control panel settings are correct. See
• The paper is damp.
Replace the paper. See
• The transfer unit is old or damaged.
Replace the transfer unit.
• The high-voltage supply is defective.
See the Xerox Support website,
for assistance.
Phaser® 6128MFP Multifunction Printer
About Paper
About Paper on page 45.
www.xerox.com/office/6128MFPsupport,
126
Print-Quality Problems
on page 45.