Tray Settings - Xerox Phaser 6128MFP User Manual

Fax Defaults Menu
Item
Fax to
Resolution
Lighten/Darken
Delayed Start

Tray Settings

There is one submenu under the Tray Settings menu: Manual Feed Slot. You can set paper
size, paper type, or Display Popup for this tray.
Common Settings for the Paper Tray
Item
Paper Size
Paper Type
Display Popup
When the size or type of paper that is loaded is different from the setting, the print quality
may fall or paper may jam. Specify the correct paper type and size.
When the paper size and type setting for each tray is the same, printing continues by
changing the feeding tray if the paper in the specified tray has run out.
Downloaded From ManualsPrinter.com Manuals
Description
Specifies whether you want to use, the keypad, speed dial, or phone book
to enter the fax number.
Specifies the resolution of the fax.
Lightens or darkens the scanned image.
Specifies the time delay before sending a fax job. Up to 23 hours and 59
minutes can be specified for the delay.
Description
Specify the paper size and orientation for each tray.
• Manual Feed Slot
• Paper Tray (default: Auto)
For details, refer to Setting Paper Types and Sizes
Specifies the type of paper loaded in each tray.
• Manual Feed Slot (default: Thin Card Stock)
• Paper Tray (default: Plain)
For details, refer to Setting Paper Types and Sizes
Specifies whether or not to display the message that prompts you to set
the paper size and type every time you load paper in the tray.
When you select On, the message that prompts you to set the paper size
and type is displayed.The default is Off.
Phaser® 6128MFP Multifunction Printer
Description of Menu Items
on page 47.
on page 47.
111