User Set Mode; Scrambler Function; Emergency Transmission - Icom IC-F5060 SERIES Instruction Manual

■ User set mode

If the transceiver has [User Set Mode] assigned to it, you can
"customize" the transceiver operation to suit your preferences
and operating style.
Entering the user set mode:
q Hold down [User Set Mode] for 1 second to enter the User
Set mode.
w Push [User Set Mode] to select the appropriate item.
Then, push [CH Up] or [CH Down] to set the desired value
or option.
• In the User Set mode, the selectable items are preset by your
dealer. The presetable items are Backlight, LCD Contrast,
Beep, Beep Level, Ringer Level, SQL Level, AF Min Level,
Mic Gain, Battery Voltage, Horn, Signal Moni, Lone Worker
and System Info.
e Hold down [User Set Mode] for 1 second again to exit the
User Set mode.

■ Scrambler function

The voice scrambler function provides private communica-
tion between stations. All versions have a built-in frequency
inversion type scrambler; however, an optional rolling or non-
rolling type is available as well.
q Push [Scrambler] to turn the scrambler function ON.
• " " (Scrambler indicator) appears.
w Push [Scrambler] again to turn the scrambler function
OFF.
• " " disappears.

■ Emergency transmission

When [Emergency] is pushed for the specified time period,
an emergency signal is automatically transmitted. (p. 6)
When [Emergency] is pushed for the specified time period,
the DTMF or 5-Tone* emergency signal is transmitted once
or repeatedly on the emergency channel. However, when no
emergency channel is specified, the signal is transmitted on
the previously selected channel.
If you want to cancel the emergency call, hold down the key
again before transmitting the call.
* Depending on the operating model type.
2
BASIC OPERATION
2
12