Options; Connection And Maintenance - Icom IC-F5060 SERIES Instruction Manual

■ Options

• RMK-3
+
separation kit
OPC-607/OPC-608/OPC-609
Allows you to install the transceiver main unit separately
from the front panel for operating convenience.
• OPC-1132/OPC-347
dc power cable
OPC-1132: 3 m (9.8 ft)
OPC-347: 7 m (23 ft)
• HM-152/HM-152T/HM-148G/HM-148T/HM-211
hand microphones
HM-152: Hand microphone
HM-152T: DTMF microphone
HM-148G: Self ground heavy duty microphone
HM-148T: Self ground heavy duty DTMF microphone
The 10-keypad of this microphone can be used
for the DTMF code transmission only.
HM-211: Noise canceling microphone
• SM-26
desktop microphone
• SP-30/SP-35/SP-35L
external speakers
Input impedance: 4 ø
Rated input: 5 W (SP-35/SP-35L), 20 W (SP-30)
Maximum input: 7 W (SP-35/SP-35L), 30 W (SP-30)
separation cable

CONNECTION AND MAINTENANCE

• UT-109R/UT-110R
scrambler units
Non-rolling type (UT-109R)/Rolling type (UT-110R) voice
scrambler unit provides higher communication security.
• UT-96R
5
tone unit
• UT-126H/UT-126HL
digital modulator
Enables 6.25 kHz digital mode operation.
Which unit to use depends on your transceiver version.
Ask your dealer for details.
( The UT-126H and UT-126HL are upgraded versions of
the UT-119H. The UT-119H can also be used, depending
on your transceiver version.)
Some options may not be available in some countries. Please ask
your dealer for details.
3
1
2
3
4
5
/
demodulator unit
6
7
8
9
10
11
12
13
14
15
16
18