Operation Of Web-Base Management - Vigitron Vi3010 Installation And Getting Started Manual

Operation of Web-Base Management

The default values of the managed switch are listed in the table below:
IP Address 192.168.1.1
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.254
Username admin
Password
After the managed switch finished the configuration in the CLI via the switch's serial
interface, you can browse it. For instance, type
row in a browser. The following screen will pop up, asking you to input the username
and password in order to login and access authentication. The default username is
"admin" and the default password is blank. For first time use, please enter the
default username and password, then click the <Login> button. The login process
now is completed.
The server 192.168.20.15 at Vi3010 requires a username and password.
Vi3010 Web User Interface
NOTE:
please refer to the details in the User's Guide. You could also
access the switch by clicking on "Help" under the web GUI.
The switch will pop up the simple help content to guide you
through setting up the parameters.
http://192.168.1.1
If you need to configure the function or parameter,
in the address
22