Ricoh MP 6503 User Manual page 192

10. Troubleshooting
Message
"Exceeded max. number of
alphanumeric characters for
the path."
"Exceeded max. number of
alphanumeric characters."
"Exceeded the maximum
number of OCR jobs that
can be on standby for
storing, please wait. Try
again after storing of the
current job has completed."
"File types have been
automatically set for some
files because multiple files
were selected."
"Programmed. Cannot
program the destination(s)
that is not programmed in
the address book."
190
Cause
The maximum number of
specifiable alphanumeric
characters in a path has
been exceeded.
The maximum enterable
number of alphanumeric
characters has been
exceeded.
The maximum allowable
number of jobs on standby
was exceeded because
large quantities of
documents were stored by
the OCR function.
If there are selected stored
documents which cannot be
converted to a specified file
format, those documents are
automatically converted to a
convertible format before
they are transmitted.
The destinations that were
selected while registered to
the program contain a folder
destination for which one of
the following destinations is
set:
manually entered
destination, WSD
destination, or DSM
destination
Solution
Check the maximum number of
characters which can be entered, and
then enter it again. For details about
the maximum enterable number of
characters, see "Values of Various Set
Items for Transmission/Storage
Function", Scan.
Check the maximum number of
characters which can be entered, and
then enter it again. For details about
the maximum enterable number of
characters, see "Values of Various Set
Items for Transmission/Storage
Function", Scan.
Up to 100 jobs can be placed on
standby by the OCR function. Scan the
next document after the current jobs
have finished being stored.
For details about the file formats used
to transmit stored documents, see
"Sending a Stored File", Scan.
WSD destinations and DSM
destinations cannot be registered to the
program because they cannot be
registered in the address book. For
manually entered destinations, register
the destinations in the address book,
and then try to register them to the
program again.