Ricoh MP 6503 User Manual page 147

Direction of paper
grain
*1 You can load paper in the
• To feed sheets that are smaller than A4 sideways ( ), keep the height of the stacked sheets less
than 20 mm.
The upper edge of the square hole in the side fence on the far side indicates the upper limit.
• When copying or printing is performed onto thick paper on Type1/2, the copy/print speed is
slower than usual.
• Select [Thick Paper 1], [Thick Paper 2], [Thick Paper 3], or [Thick Paper 4] as the paper thickness in
[Tray Paper Settings].
• Even if thick paper is loaded as described above, normal operations and print quality might still not
be possible, depending on the paper type.
• Prints might have prominent vertical creases.
• Prints might be noticeably curled. Flatten out prints if they are creased or curled.
Tray 1 Trays 2 and 3
*1
orientation into tray 1 only if the A3/11 × 17 tray unit is installed.
DPZ042
Recommended Paper
Bypass tray
145