Ricoh MP 6503 User Manual page 169

Message
"Check whether there are
any network problems."
[13-17]
"Check whether there are
any network problems."
[13-18]
"Check whether there are
any network problems."
[13-24]
"Check whether there are
any network problems."
[13-25]
Messages Displayed When You Use the Facsimile Function
Cause
User name registration is
refused by SIP server.
Cannot access SIP server.
The password registered for
the SIP server is not the same
as the password registered
for this machine.
In [Effective Protocol], the IP
address is not enabled, or an
incorrect IP address has been
registered.
Solution
• Correct that the correct SIP Server
IP Address and SIP User Name
are listed in [SIP Settings] of [Fax
Features]. For details about SIP
Settings, see "Initial Settings", Fax.
• For details about network
problems, contact your
administrator.
• Check that the correct SIP Server
IP Address is listed in [SIP
Settings] of [Fax Features]. For
details about SIP Settings, see
"Initial Settings", Fax.
• For details about network
problems, contact your
administrator.
For details about network problems,
contact your administrator.
• Check that IPv4 in [Effective
Protocol] is set to "Active" in
[System Settings]. For details
about effective protocol, see
"Interface Settings", Connecting
the Machine/ System Settings.
• Check that the correct IPv4
address is specified for the
machine in [System Settings]. For
details about IPv4 address, see
"Interface Settings", Connecting
the Machine/ System Settings.
• For details about network
problems, contact your
administrator.
167